Liposomes as selenium nanocarriers for foliar application to wheat plants: A biofortification strategy.

In the present work, liposomes have been used as nanocarriers in the biofortification of wheat plants with selenium (Se) through foliar application. Liposomal formulations were prepared using 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and Phospholipon®90H (P90H) (average size <100 nm), loaded with different concentrations of inorganic Se (selenite and selenate) and applied twice to the plants in the stage of vegetative growth. Liposomes enhanced Se uptake by wheat plants compared to direct application. The highest Se enrichment was achieved using the phospholipid DPPC and a concentration of 1000 µmol·L-1 of Se without affecting the biomass, chlorophylls, carotenoids, and the concentration of mineral nutrients of the plants. The chemical speciation of Se in the plants was further investigated by X-ray absorption spectroscopy (XAS). The results from XAS spectra revealed that most of the inorganic Se was transformed to organic Se and that the use of liposomes influenced the proportion of C-Se-C over C-Se-Se-C species.

Phytochemical Profile, Bioactive Properties, and Se Speciation of Se-Biofortified Red Radish (Raphanus sativus), Green Pea (Pisum sativum), and Alfalfa (Medicago sativa) Microgreens.

The impact of selenium (Se) enrichment on bioactive compounds and sugars and Se speciation was assessed on different microgreens (green pea, red radish, and alfalfa). Sodium selenite and sodium selenate at a total concentration of 20 µM (1:1) lead to a noticeable Se biofortification (40-90 mg Se kg-1 DW). In green pea and alfalfa, Se did not negatively impact phenolics and antioxidant capacity, while in red radish, a significant decrease was found. Regarding photosynthetic parameters, Se notably increased the level of chlorophylls and carotenoids in green pea, decreased chlorophyll levels in alfalfa, and had no effect on red radish. Se treatment significantly increased sugar levels in green pea and alfalfa but not in red radish. Red radish had the highest Se amino acid content (59%), followed by alfalfa (34%) and green pea (28%). These findings suggest that Se-biofortified microgreens have the potential as functional foods to improve Se intake in humans.

Selenium biofortification of microgreens: Influence on phytochemicals, pigments and nutrients.

Kale (Brassica oleracea L. var. sabellica L.), kohlrabi (Brassica oleracea L. var. gongylodes L.) and wheat (Triticum aestivum L. cv. Bancal) microgreens were cultivated in presence of selenium 20 µmol L-1 as sodium selenite and sodium selenate mixture. The influence of this biofortification process was evaluated in terms of biomass production, total Se, macro- and micronutrients concentration, polyphenols, antioxidant activity, chlorophylls and carotenoids levels and total soluble proteins content. The results obtained have shown a significant concentration of total Se in the biofortified microgreens of kale (133 µg Se·g-1 DW) and kohlrabi (127 µg Se·g-1 DW) higher than that obtained for wheat (28 µg Se·g-1 DW). The Se uptake in all the species did not produce oxidative damage to the plants reflected in the bioactive compounds, antioxidant capacity or pigments concentration. These Se-enriched microgreens may contribute to the recommended intake of this nutrient in human diet as to overcome Se-deficiency.

Mercury speciation in selenium enriched wheat plants hydroponically exposed to mercury pollution.

Mercury (Hg) pollution in agricultural soils and its potential pathway to the human food chain can pose a serious health concern. Understanding the pathway of Hg in plants and how the speciation may change upon interaction with other elements used for biofortification can be critical to assess the real implications for the final plant-based product. In that respect, selenium (Se) biofortification of crops grown in Se-poor soil regions is becoming a common practice to overcome Se deficient diets. Therefore, it is important to assess the interplay between these two elements since Se may form complexes with Hg reducing its bioavailability and toxicity. In this work, the speciation of Hg in wheat plants grown hydroponically under the presence of Hg (HgCl2) and biofortified with Se (selenite, selenate, or a 1:1 mixture of both) has been investigated by X-ray absorption spectroscopy at the Hg L3-edge. The main Hg species found in wheat grains was the highly toxic methylmercury. It was found that the Se-biofortification of wheat did not prevent, in general, the Hg translocation to grains. Only the 1:1 mixture treatment seemed to have an effect in reducing the levels of Hg and the presence of methylmercury in grains.

Direct and indirect selenium speciation in biofortified wheat: A tale of two techniques.

Wheat can be biofortified with different inorganic selenium (Se) forms, selenite or selenate. The choice of Se source influences the physiological response of the plant and the Se metabolites produced. We looked at selenium uptake, distribution and metabolization in wheat exposed to selenite, selenate and a 1:1 molar mixture of both to determine the impact of each treatment on the Se speciation in roots, shoots, and grains. To achieve a comprehensive quantification of the Se species, the complementarity of high-performance liquid chromatography coupled with inductively coupled plasma mass spectrometry and X-ray absorption spectroscopy was exploited. This approach allowed the identification of the six main selenium species: selenomethionine, selenocysteine, selenocystine, selenite, selenate, and elemental selenium. The three treatments resulted in similar total selenium concentration in grains, 90-150 mg Se kg-1 , but produced different effects in the plant. Selenite enhanced root accumulation (66% of selenium) and induced the maximum toxicity, whereas selenate favored shoot translocation (46%). With the 1:1 mixture, selenium was distributed along the plant generating lower toxicity. Although all conditions resulted in >92% of organic selenium in the grain, selenate produced mainly C-Se-C forms, such as selenomethionine, while selenite (alone or in the mixture) enhanced the production of C-Se-Se-C forms, such as selenocystine, modifying the selenoamino acid composition. These results provide a better understanding of the metabolization of selenium species which is key to minimize plant toxicity and any concomitant effect that may arise due to Se-biofortification.

Effective Removal of Boron from Aqueous Solutions by Inorganic Adsorbents: A Review.

Increasing levels of boron in water exceeding acceptable thresholds have triggered concerns regarding environmental pollution and adverse health effects. In response, significant efforts are being made to develop new adsorbents for the removal of boron from contaminated water. Among the various materials proposed, inorganic adsorbents have emerged as promising materials due to their chemical, thermal, and mechanical stability. This review aims to comprehensively examine recent advances made in the development of inorganic adsorbents for the efficient removal of boron from water. Firstly, the adsorption performance of the most used adsorbents, such as magnesium, iron, aluminum, and individual and mixed oxides, are summarized. Subsequently, diverse functionalization methods aimed at enhancing boron adsorption capacity and selectivity are carefully analyzed. Lastly, challenges and future perspectives in this field are highlighted to guide the development of innovative high-performance adsorbents and adsorption systems, ultimately leading to a reduction in boron pollution.

Decoupling the adsorption mechanisms of arsenate at molecular level on modified cube-shaped sponge loaded superparamagnetic iron oxide nanoparticles.

In this study, a commercial cube-shaped open-celled cellulose sponge adsorbent was modified by in-situ co-precipitation of superparamagnetic iron oxide nanoparticles (SPION) and used to remove As(V) from aqueous solutions. Fe K-edge X-ray absorption spectroscopy (XAS) and TEM identified maghemite as the main iron phase of the SPION nanoparticles with an average size 13 nm. Batch adsorption experiments at 800 mg/L showed a 63% increase of adsorption capacity when loading 2.6 wt.% mass fraction of SPION in the cube-sponge. Experimental determination of the adsorption thermodynamic parameters indicated that the As(V) adsorption on the composite material is a spontaneous and exothermic process. As K-edge XAS results confirmed that the adsorption enhancement on the composite can be attributed to the nanoparticles loaded. In addition, adsorbed As(V) did not get reduced to more toxic As(III) and formed a binuclear corner-sharing complex with SPION. The advantageous cube-shape of the sponge-loaded SPION composite together with its high affinity and good adsorption capacity for As(V), good regeneration capability and the enhanced-diffusion attributed to its open-celled structure make this adsorbent a good candidate for industrial applications.

Tooth whitening effects on dental enamel, oxidation or reduction? Comparison of physicochemical alterations in bovine enamel using Synchrotron-based Micro-FTIR.

OBJECTIVES: To compare the side effects of typical whitening treatments (by means of oxidation) compared to the new treatment developed by the authors through reduction. The aim is to provide information about the chemical interactions of the encapsulated reductant agent (metabisulfite, MBS) with the enamel structure compared with carbamide peroxide (CP) and to study their penetration in the hydroxyapatite (HAP) and the changes produced in the mineral and its hardness. METHODS: Chemical imaging is performed by synchrotron-based micro Fourier transformed infrared spectroscopy (SR-µFTIR). Continuous Stiffness Measurements (CSM) were used to determine the depth reached by the treatments in order to delimitate the area of study. RESULTS: The SR-µFTIR studies showed that MBS treatments softened the first 10 µm of enamel, as happens in the initial stages of tooth decay. Principal component analysis (PCA) showed that the main differences between treatments were found in the intensity of the ν3 PO43- peak related to tooth demineralization. CP and MBS promoted different changes in the HAP mineral, observed as opposite shifts of the peak: CP shortened the P-O bond while MBS seemed to elongate it. Moreover, MBS promoted the loss of carbonates while CP did not, which is probably related to the solution's pH. When comparing MBS and MBS Liposomes, it was observed how liposomes favoured the diffusion of MBS to inner layers, since the effects of MBS were observed in deeper enamel. Thus, the encapsulated MBS whitening effect is highly improved in terms of time when compared to MBS alone or CP. SIGNIFICANCE: The obtained results indicated that using oxidizing (CP) or reducing (MBS) treatments, promote different HAP mineral changes, and that liposomes favour the diffusion of MBS into the enamel. It is the first time that synchrotron light is used to map the bovine incisor's enamel chemically, and to determine the effect of a whitening treatment in terms of chemical HAP modifications, and the extent in deep of these effects.

Enhanced arsenite removal by superparamagnetic iron oxide nanoparticles in-situ synthesized on a commercial cube-shape sponge: adsorption-oxidation mechanism.

HYPOTHESIS: The easy aggregation of superparamagnetic iron oxide nanoparticles (SPION) greatly reduces their adsorption performance for removing arsenic (As) from polluted water. We propose to exploit the porosity and good diffusion properties of a cube-shaped cellulose sponge for loading SPION to reduce the aggregation and to develop a composite adsorbent in the cm-scale that could be used for industrial applications. EXPERIMENTS: SPION were in-situ synthesized by co-precipitation using a commercial cube-shaped sponge (MetalZorb®) as support. The morphology, iron-oxide phase, adsorption performance and thermodynamic parameters of the composite adsorbent were determined to better understand the adsorption process. X-ray absorption spectroscopy (XAS) was used to investigate the chemical state of the adsorbed As(III). FINDINGS: The adsorption of the supported SPION outperforms the unsupported SPION (ca. 14 times higher adsorption capacity). The modelling of the adsorption isotherms and the kinetic curves indicated that chemisorption is controlling the adsorption process. The thermodynamic analysis shows that the adsorption retains the spontaneous and endothermic character of the unsupported SPION. The XAS results revealed an adsorption-oxidation mechanism in which the adsorbed As(III) was partially oxidized to less toxic As(V) by the hydroxyl free radical (•OH) generated from Fe(III) species and by the hydroxyl groups.

Discriminating the origin of calcium oxalate monohydrate formation in kidney stones via synchrotron microdiffraction.

Nephrolithiasis is a multifactor disease that produces nephrolites in the kidneys. Calcium oxalate hydrate (dihydrated, COD, or monohydrated, COM) stones are the most common ones with more than sixty percent incidence worldwide. They are related to different pathologies, COD with hypercalciuria and COM with hyperoxaluria. COD is an unstable species and transforms into COM (herein named TRA to distinguish the origin of the monohydrated species). TRA and COM are chemically and crystallographically identical leading to misdiagnosis and recurrence increase. In the current study, the composition and crystalline structures of several calcium oxalate stones, classified by morpho-constitutional analysis, were examined by IR and synchrotron through-the-substrate micro-X-ray diffraction (tts-µXRD). Both IR and linear diffractogram studies were able to distinguish between the monohydrated and dihydrated phases but not between COM and TRA, as expected. The analysis of 2D diffraction patterns revealed that TRA showed a lower degree of crystallinity and less texture with respect to COM which can be used as a signature to distinguish between the two. This study confirms that despite the subtle differences between COM and TRA, the origin of the monohydrate oxalates can be unraveled using tts-µXRD. This valuable information should be taken into account in order to improve patients' diagnosis and reduce recurrence by considering and treating the origin of the formed stones.

Photon-in/photon-out spectroscopy at the I20-scanning beamline at diamond light source.

A scanning multi-crystal x-ray emission spectrometer to perform photon-in/photon-out spectroscopy at the I20-Scanning beamline at Diamond Light Source is described. The instrument, equipped with three analyzer crystals, is based on a 1 m Rowland circle spectrometer operating in the vertical plane. The energy resolution of the spectrometer is of the order of 1 eV, having sufficient resolving power to overcome the core-hole lifetime broadening of most of the transition metalsK-edges. Examples showing the capability of the beamline for performing high energy resolution fluorescence detection x-ray absorption spectroscopy (HERFD-XAS), non-resonant x-ray emission spectroscopy (XES) and resonant x-ray emission spectroscopy are presented. The comparison of the Zn and MnK-edge HERFD-XANES of ZnO and MnO withab initiocalculations shows that the technique provides enhanced validation of the models by making subtle spectral features more visible.

Co-application of Se and a biostimulant at different wheat growth stages: Influence on grain development.

An appropriate selenium intake can be beneficial for human health. Se-biofortified food in Se-deficient regions is becoming an increasingly common practice but there are still issues to be addressed regarding the observed Se-induced toxicity to the plant. In this respect, plant biostimulants are used to enhance nutrition efficiency, abiotic stress tolerance and crop quality. In this work, the efficacy of a plant biostimulant to counteract the Se-induced stress in wheat plants is experimentally assessed. The co-application of different Se-biofortification treatments and the biostimulant at different growth stages (tillering or heading stage) was investigated. The use of micro focused X-ray spectroscopy allows us to confirm organic Se species to be the main Se species found in wheat grain and that the proportion of organic Se species is only slightly affected by the Se application stage. Our study proves that the biostimulant had a key role in the enhancement of both the amount of grains produced per spike and their dry biomass without hindering Se enrichment process, neither diminishing the Se concentration nor massively disrupting the Se species present. This information will be useful to minimize both plant toxicity and economic cost towards a more effective and plant healthy selenium supplementation.

Enhancement of selective adsorption of Cr species via modification of pine biomass.

Pine biomass (Pine), pine gasification biochar (PG) and pine biomass loaded with TiO2 (Pine/TiO2) were used as sorbent materials to remove Cr(III) or Cr(VI) ions from aqueous solutions. Our results showed that Pine/TiO2 had an improved adsorption capacity respect to Pine being the adsorption capacity for Cr(VI), 12.8 mg/g, much larger than for Cr(III), 1.23 mg/g. On the other hand, PG showed much higher adsorption for Cr(III), 12.4 mg/g, than Pine/TiO2, and negligible adsorption for Cr(VI). To understand this species-dependent adsorption behavior, the adsorption mechanisms, sorbents morphology and functional sites were characterized using a multi-technique approach. The chemical state and local coordination structure of the adsorbed Cr species was studied by X-ray absorption spectroscopy (XAS). Our results show that the adsorption of Cr(III) occurred mainly through cation exchange with mineral elements in PG biochar, whereas the Cr(III) adsorption by functional groups (carboxyl and hydroxyl groups) dominate in the biomass sorbent. The enhancement of Cr(VI) adsorption in Pine/TiO2 can be explained by the presence of TiOH2+groups present in the surface of the TiO2 microparticles. X-ray absorption spectroscopy (XAS) results reveal that Cr(VI) reduces to Cr(III) after being adsorbed by the sorbent materials.

Relation among Oxygen Stoichiometry, Structure, and Co Valence and Spin State in Single-Layer La2-xAxCoO4±Î´ (A = Ca, Sr) Perovskites.

We have investigated the role of oxygen stoichiometry and structural properties in the modulation of Co valence and spin state in single-layer La2-xAxCoO4±Î´ (A = Sr, Ca; 0 ≤ x ≤ 1) perovskites as well as the interplay between their local structural properties and the magnetic and charge-ordering phenomena. We show the results of high angular resolution powder X-ray diffraction and Co K-edge X-ray absorption and emission spectroscopy experiments on polycrystalline and single-crystal samples. The different doping-induced changes in the Co valence and spin state by Ca (or Sr) substitution can be understood in terms of the evolving oxygen stoichiometry. For Ca doping, the interstitial oxygen excess around the La/Ca atoms in underdoped samples is rapidly lost upon increasing the Ca content. The creation of oxygen vacancies leads to the stabilization of a mixed-valence Co2.5+ independently of the Ca content. In contrast, Sr substitution leads to almost stoichiometric samples and a lower oxygen vacancy concentration, which allows higher mixed-valence states for Co up to Co2.9+. The Co mixed-valence state along the two series is fluctuating between two valence states, Co2.4+ as in La2CoO4.2 and Co2.9+ as in LaSrCoO3.91, that become periodically ordered for the charge-ordered phases around the half-doping. The X-ray emission derived spin states agree well with the Co fluctuating mixed-valence state derived from X-ray absorption spectroscopy on consideration of a distribution of high-spin Co2+ and low-spin Co3+. Furthermore, there is no quenching of the orbital contribution for the high-spin Co2+, as concluded from a comparison with macroscopic magnetization measurements. Doping holes are mainly located in the ab plane and have a strong oxygen 2p character. The major lattice distortions, which are different for Sr and Ca doping, occur along the c axis, where changes in the oxygen stoichiometry take place. Moreover, charge-order transitions are clearly shown from the anomalous increase of the c lattice parameter with an increase in the temperature above 500 K but there is no signature for a temperature-dependent spin-state transition.

Characterization of Calcium Oxalate Hydrates and the Transformation Process.

Calcium oxalate can be found in humans as kidney stones and in cultural heritage as films in two crystallographic species, dihydrate (COD/weddellite) and/or monohydrate (COM/whewellite). Due to its instability, COD is transformed into COM. Studying this crystalline conversion provides information about the origin of the monohydrated species, which will help in the assessment of prevention measurements to avoid their formation. In the present study, the synthesis of calcium oxalate hydrate microcrystals has been carefully performed to avoid mixture of phases in the final products; the long and short range order structure of both species have been studied by X-ray diffraction (XRD) and X-ray absorption spectroscopy (XAS), respectively. This structural information was considered in the density functional theory (DFT) computational study performed to assign the characteristic vibrational IR and Raman frequencies found. This detailed characterization allows an unambiguous assignment of the vibrations, thus providing the appropriate parameters required to monitor and characterize the transformation process.

A general covalent binding model between cytotoxic selenocompounds and albumin revealed by mass spectrometry and X-ray absorption spectroscopy.

Selenocompounds (SeCs) are promising therapeutic agents for a wide range of diseases including cancer. The treatment results are heterogeneous and dependent on both the chemical species and the concentration of SeCs. Moreover, the mechanisms of action are poorly revealed, which most probably is due to the detection methods where the quantification is based on the total selenium as an element. To understand the mechanisms underlying the heterogeneous cytotoxicity of SeCs and to determine their pharmacokinetics, we investigated selenium speciation of six SeCs representing different categories using liquid chromatography-mass spectrometry (LC-MS) and X-ray absorption spectroscopy (XAS) and the cytotoxicity using leukemic cells. SeCs cytotoxicity was correlated with albumin binding degree as revealed by LC-MS and XAS. Further analysis corroborated the covalent binding between selenol intermediates of SeCs and albumin thiols. On basis of the Se-S model, pharmacokinetic properties of four SeCs were for the first time profiled. In summary, we have shown that cytotoxic SeCs could spontaneously transform into selenol intermediates that immediately react with albumin thiols through Se-S bond. The heterogeneous albumin binding degree may predict the variability in cytotoxicity. The present knowledge will also guide further kinetic and mechanistic investigations in both experimental and clinical settings.

Extracellular Albumin Covalently Sequesters Selenocompounds and Determines Cytotoxicity.

Selenocompounds (SeCs) are well-known nutrients and promising candidates for cancer therapy; however, treatment efficacy is very heterogeneous and the mechanism of action is not fully understood. Several SeCs have been reported to have albumin-binding ability, which is an important factor in determining the treatment efficacy of drugs. In the present investigation, we hypothesized that extracellular albumin might orchestrate SeCs efficacy. Four SeCs representing distinct categories were selected to investigate their cytotoxicity, cellular uptake, and species transformation. Concomitant treatment of albumin greatly decreased cytotoxicity and cellular uptake of SeCs. Using both X-ray absorption spectroscopy and hyphenated mass spectrometry, we confirmed the formation of macromolecular conjugates between SeCs and albumin. Although the conjugate was still internalized, possibly via albumin scavenger receptors expressed on the cell surface, the uptake was strongly inhibited by excess albumin. In summary, the present investigation established the importance of extracellular albumin binding in determining SeCs cytotoxicity. Due to the fact that albumin content is higher in humans and animals than in cell cultures, and varies among many patient categories, our results are believed to have high translational impact and clinical implications.

The scanning four-bounce monochromator for beamline I20 at the Diamond Light Source.

A description of the technical and design details of a scanning four-bounce crystal monochromator that has recently been commissioned for the Versatile X-ray Absorption Spectroscopy (XAS) beamline at Diamond Light Source is presented. This device consists of two independent rotary axes of unique design which are synchronized using a multiple read-head encoder system. This monochromator is shown to be capable of maintaining the flux throughput of the Bragg axes without the need of any external feedback mechanism from 4 to 20 keV. The monochromator is currently equipped with cryogenically cooled crystals with the upstream axis consisting of two independent Si(111) crystals and a pair of channel-cut crystals in the downstream axis. The possibility of installing an additional Si(311) crystal-set to extend the energy range to 34 keV is incorporated into the preliminary design of the device. Experimental data are presented showing the exceptional mechanical stability and repeatability of the monochromator axes.

Improving the quality of XAFS data.

Following the Q2XAFS Workshop and Satellite to IUCr Congress 2017 on `Data Acquisition, Treatment, Storage - quality assurance in XAFS spectroscopy', a summary is given of the discussion on different aspects of a XAFS experiment that affect data quality. Some pertinent problems ranging from sources and minimization of noise to harmonic contamination and uncompensated monochromator glitches were addressed. Also, an overview is given of the major limitations and pitfalls of a selection of related methods, such as photon-out spectroscopies and energy-dispersive XAFS, and of increasingly common applications, namely studies at high pressure, and time-resolved investigations of catalysts in operando. Advice on how to avoid or deal with these problems and a few good practice recommendations are reported, including how to correctly report results.

The Spectroscopy Village at Diamond Light Source.

This manuscript presents the current status and technical details of the Spectroscopy Village at Diamond Light Source. The Village is formed of four beamlines: I18, B18, I20-Scanning and I20-EDE. The village provides the UK community with local access to a hard X-ray microprobe, a quick-scanning multi-purpose XAS beamline, a high-intensity beamline for X-ray absorption spectroscopy of dilute samples and X-ray emission spectroscopy, and an energy-dispersive extended X-ray absorption fine-structure beamline. The optics of B18, I20-scanning and I20-EDE are detailed; moreover, recent developments on the four beamlines, including new detector hardware and changes in acquisition software, are described.