Electrostatically crosslinked cellulose nanocrystal and polyelectrolyte complex sponges with pH responsiveness.

This work focuses on the development of a responsive sponge made of an anionic cellulose nanocrystal (CNC) skeleton that is electrostatically crosslinked by a pH-responsive poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) polyelectrolyte complex (PEC). The results prove the formation of a global percolated network comprised of disordered CNC rods crosslinked by PEC clusters. The bulk density of the freeze-dried CNC-PEC sponges increases from 35 to 93 mg/cm3 with PEC concentration, while the compression modulus of dry specimens increases from 7 up to 62 kPa. At the lowest PEC concentration of 1 wt%, at pH 2.0, the compression modulus decreases to 0.9 kPa, whereas at pH 5.5, it increases to 42 kPa. The intensive complexation between sponge constituents is also reflected in a reduced ability to bind charged dyes at neutral pH values. Decreasing the pH results in an increased adsorption efficiency for anionic dyes, while raising the pH improves the cationic dye adsorption.

Structure and Rheology of Polyelectrolyte Complexes in the Presence of a Hydrogen-Bonded Co-Solvent.

Intermolecular interactions as well as macromolecular conformation affect the rheological and microstructural properties of polyelectrolyte complexes (PECs) solutions. The properties of semi-dilute solutions of weakly charged PECs can be controlled by the degree of ionization and solvent composition. In this work, we examined the effect of ethanol as a co-solvent on PECs composed of poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) at low pH. The aqueous PECs solution was turbid, indicating formation of large aggregates, whereas PECs solution in water/ethanol (60:40 w/w) was transparent, implying no aggregation, and demonstrated higher relative viscosity than the aqueous solution, implying pronounced network formation. Imaging PECs solution by transmission electron microscopy (TEM) demonstrated aggregation, whereas the solution prepared with the mixed solvent revealed almost no phase contrast. Small-angle X-ray scattering (SAXS) of PECs in the aqueous solution indicated the presence of aggregates, while PECs in mixed solvent demonstrated a swelled macromolecular conformation with diminished aggregation. PECs with no ionic interactions in the mixed solvent assumes a homogenous network structure, which enables PECs solution processing by electrospinning.

Tunable pH-Responsive Chitosan-Poly(acrylic acid) Electrospun Fibers.

The macromolecular organization in system composed of anionic poly(acrylic acid) (PAA) and cationic chitosan (Cs), with different degrees of deacetylation (DD), under extensive elongational flow, is described. Cs/PAA nanofibers were obtained, and polyelectrolyte complexation only occurred when fibers were immersed in fluid media of a certain pH. Assembled polyelectrolytes complexes formed a pH-triggered system, as demonstrated by reversible change of the swelling degree, by 3 orders of magnitude, and a change on the elastic modulus, by 2 orders of magnitude. Both the swelling degree and the elastic modulus proved sensitive to the DD of Cs. Rheological measurements showed that increased DD of Cs resulted in a decrease in viscosity of both pure Cs and precursor Cs/PAA solutions, attributed to repulsive interactions between ionized amino groups in Cs. At the same time, a DD-dependent change in balance between hydrogen bonding and ion-dipole interactions between the components in Cs/PAA, was responsible for the more pronounced viscosity decrease in these solutions.

Electrospinning polyelectrolyte complexes: pH-responsive fibers.

Fibers were electrospun from a solution comprised of oppositely charged polyelectrolytes, in efforts to achieve highly confined macromolecular packaging. A stoichiometric ratio of poly(allylamine hydrochloride) and poly(acrylic acid) solution was mixed in an ethanol-water co-solvent. Differential scanning calorimetry (DSC) analysis of electrospun fibers demonstrated no indication of glass transition, Tg. Infrared spectroscopy (FTIR) analysis of the fibers as a function of temperature, demonstrated an amidation process at lower temperature compared to cast film. Polarized FTIR indicated a preference of the functional groups to be perpendicular to the fiber axis. These results imply formation of mixed phase fibers with enhanced conditions for intermolecular interactions, due to the highly aligned and confined assembly of the macromolecules. The tunable intermolecular interactions between the functional groups of the polyelectrolytes, impact pH-driven, reversible swelling-deswelling of the fibers. The degree of ionization of PAA at pH 5.5 and pH 1.8 varied from 85% to 18%, correspondingly, causing transformation of ionic interactions to hydrogen bonding between the functional groups. The chemical change led to a massive water diffusion of 500% by weight and to a marked increase of 400% in fiber diameter, at a rate of 0.50 µm s(-1). These results allow for manipulation and tailoring of key fiber properties for tissue engineering, membranes, and artificial muscle applications.