Large Thermally Irreversible Photoinduced Shift of Selective Light Reflection in Hydrazone-Containing Cholesteric Polymer Systems.

Stimuli responsive liquid crystalline polymers are a unique class of so-called "smart" materials demonstrating various types of mesomorphic structures easily controlled by external fields, including light. In the present work we synthesized and studied a comb-shaped hydrazone-containing copolyacrylate exhibited cholesteric liquid crystalline properties with the pitch length of the helix being tuned under irradiation with light. In the cholesteric phase selective light reflection in the near IR spectral range (1650 nm) was measured and a large blue shift of the reflection peak from 1650 nm to 500 nm was found under blue light (428 or 457 nm) irradiation. This shift is related to the Z-E isomerization of photochromic hydrazone-containing groups and it is photochemically reversible. The improved and faster photo-optical response was found after copolymer doping with 10 wt % of low-molar-mass liquid crystal. It is noteworthy that both, the E and Z isomers of hydrazone photochromic group are thermally stable that enable to achieve a pure photoinduced switch without any dark relaxation at any temperatures. The large photoinduced shift of the selective light reflection, together with thermal bistability, makes such systems promising for applications in photonics.

Temperature-Dependent Circularly Polarized Luminescence of a Cholesteric Copolymer Doped with a Europium Complex.

The design of new materials for non-contact temperature sensors is an important task for scientists working in the fields of chemistry, physics, and materials science. In the present paper, a novel cholesteric mixture based on a copolymer doped with a highly luminescent europium complex was prepared and studied. It was found that the spectral position of the selective reflection peak strongly depends on temperature and a shift towards shorter wavelengths is observed upon heating with an amplitude of more than 70 nm, from the red to green spectral range. This shift is associated with the existence and melting of clusters of smectic order, as confirmed by X-ray diffraction investigations. The extreme temperature dependence of the wavelength of selective light reflection provides a high thermosensitivity of the degree of circular polarization of the europium complex emission. The highest values of the dissymmetry factor are observed when the peak of selective light reflection fully overlaps with the emission peak. As a result, the highest sensitivity of 65%/K for luminescent thermometry materials was obtained. In addition, the ability of the prepared mixture to form stable coatings was demonstrated. The obtained experimental results, i.e., the high thermosensitivity of the degree of circular polarization, and the ability to form stable coatings allow us to consider the prepared mixture as a promising material for luminescent thermometry.

Optimization of the photo-orientation rate of an azobenzene-containing polymer based on a kinetic model of photoinduced ordering.

The explicit dependence of the rate of photoinduced ordering (photo-orientation) of an azobenzene-containing liquid-crystalline polymer on the photostationary concentration of cis-azobenzene has been predicted theoretically and found experimentally. The employed kinetic model based on the photoinduced rearrangement of the domain structure of a liquid-crystalline material predicts the maximum rate of photo-orientation at ca. 50% content of the cis-isomer in the photostationary state of irradiation. For experimental fine tuning of the photostationary trans-cis ratio, the simultaneous irradiation of material with two beams of light with different wavelengths was employed. The excellent agreement of theory and experiment indicates that the difference of photostationary fractions of cis-azobenzene fragments in adjacent domains of different orientations is the driving force of photoinduced ordering.

Self-Assembling Behavior of Smart Nanocomposite System: Ferroelectric Liquid Crystal Confined by Stretched Porous Polyethylene Film.

The control and prediction of soft systems exhibiting self-organization behavior can be realized by different means but still remains a highlighted task. Novel advanced nanocomposite system has been designed by filling of a stretched porous polyethylene (PE) film with pore dimensions of hundreds of nanometers by chiral ferroelectric liquid crystalline (LC) compound possessing polar self-assembling behavior. Lactic acid derivative exhibiting the paraelectric orthogonal smectic A* and the ferroelectric tilted smectic C* phases over a broad temperature range is used as a self-assembling compound. The morphology of nanocomposite film has been checked by Atomic Force Microscopy (AFM). The designed nanocomposite has been studied by polarizing optical microscopy (POM), differential scanning calorimetry (DSC), small and wide-angle X-ray scattering and broadband dielectric spectroscopy. The effect of a porous PE confinement on self-assembling, structural, and dielectric behavior of the chiral LC compound has been established and discussed. While the mesomorphic and structural properties of the nanocomposite are found not to be much influenced in comparison to that of a pure LC compound, the polar properties have been toughly suppressed by the specific confinement. Nevertheless, the electro-optic switching was clearly observed under applied electric field of low frequency (210 V, 19 Hz). The dielectric spectroscopy and X-ray results reveal that the helical structure of the ferroelectric liquid crystal inside the PE matrix is completely unwound, and the molecules are aligned along stretching direction. Obtained results demonstrate possibilities of using stretched porous polyolefins as promising matrices for the design of new nanocomposites.

Laser-induced formation of "craters" and "hills" in azobenzene-containing polymethacrylate films.

Functional organic polymer materials with an ability to change their surface topography in response to external contactless stimuli, like light irradiation, have attracted considerable attention. This work is devoted to the study of contactless control of the surface topography and the formation of the surface features in the amorphousized and liquid crystalline films of two azobenzene-containing polymers. The investigated polymers are side-chain polymethacrylates containing azobenzene chromophores with two lateral methyl substituents in ortho-positions and differing in the length of flexible spacer with six and ten methylene units. Two lateral methyl substituents at the azobenzene chromophore ensure high photoresponses of these polymeric samples in the whole visible spectral range. Irradiation of the polymethacrylate films by focused polarized light of green (532 nm) and red (633 nm) lasers induces a specific photodeformation of the film surface. In the case of the green light formation of circular "craters" with anisotropic borders was found, whereas for the red light highly asymmetric "hills" were observed. The possible mechanisms of the surface topography formation and their features are discussed.

Phase Structure Recording in a Nematic Side-Chain Liquid-Crystalline Polymer.

Dye-doped nematic side-chain liquid-crystalline polymers possess extraordinary large optical nonlinearity and ability to store the induced orientational deformations in a glassy state, which makes them a very promising material for photonic applications. In this study, the phase structures were generated and recorded in the bulk of a 50-µm layer of a nematic liquid-crystalline side-chain polymer, containing polyacrylate backbone, spacer having five methylene groups, and phenyl benzoate mesogenic fragment. The polymer was doped with KD-1 azodye. The director field deformations induced by the light beam close to the TEM01 mode were studied for different geometries of light-polymer interaction. The phase modulation depth of 2π was obtained for the 18-µm spacing between intensity peaks. The experimental data were analyzed based on the elastic continuum theory of nematics. The possibility to induce and record positive and negative microlenses in the polymer bulk was shown experimentally.

Dynamic Diffractive Patterns in Helix-Inverting Cholesteric Liquid Crystals.

The future of adaptive materials will rely on transduction of molecular motion across increasing length scales, up to the macroscopic and functional level. In this context, liquid crystals have emerged as a promising amplification medium, in view of their long-range order and high sensitivity to external stimuli, and in particular, chiral liquid crystals have demonstrated widely tunable optical properties and invertible handedness. Here, we demonstrate that by applying weak electric fields, regular, periodic and light-tunable patterns can be formed spontaneously in cholesteric liquid crystals. These patterns can be used as light-tunable diffraction gratings for which the period, the diffraction efficiency, and the in-plane orientation of grating vector can be controlled precisely, reversibly, and independently. Such a photoregulation allows generating a variety of one- and two-dimensional complex diffractive patterns in a single material. Our data are also supported by modeling and theoretical calculations. Overall, the fine tunability of cholesteric materials doped with artificial molecular switches makes them attractive for optics and photonics.

Direct Observation of Changes in Focal Conic Domains of Cholesteric Films Induced by Ultraviolet Irradiation.

The helical supramolecular structure of cholesteric liquid crystalline (LC) films predetermines their outstanding optical properties and the unique nanostructure of their surface. The introduction of photochromic dopants in these films opens up an interesting possibility for creation of smart cholesteric materials with photocontrollable optical and photovariable surface properties. Using atomic force microscopy (AFM), we performed in situ measurements of the surface topography of cyclosiloxane LC cholesteric oligomer films during the cholesteric helix twisting caused by their preliminary ultraviolet (UV) irradiation. A chiral-photochromic isosorbide-based dopant was introduced in the films to control the cholesteric helix pitch by UV-irradiation. The initial films are characterized by planar texture with the presence of focal conic domains having the double-spiral relief on their surface. UV-irradiation of these films leads to the cholesteric helix twisting resulting in a decrease in the surface relief period, and the enlargement of defect areas between the domains. The detailed mechanisms of the rearrangement of the film surface structure due to the cholesteric helix twisting are suggested. They include the rotation and displacement of cholesteric layers in the bulk, and the nucleation of new ones at the surface in defect regions.

Cholesteric Polymer Scaffolds Filled with Azobenzene-Containing Nematic Mixture with Phototunable Optical Properties.

The past two decades witnessed tremendous progress in the field of creation of different types of responsive materials. Cholesteric polymer networks present a very promising class of smart materials due to the combination of the unique optical properties of cholesteric mesophase and high mechanical properties of polymer networks. In the present work we demonstrate the possibility of fast and reversible photocontrol of the optical properties of cholesteric polymer networks. Several cholesteric photopolymerizable mixtures are prepared, and porous cholesteric network films with different helix pitches are produced by polymerization of these mixtures. An effective and simple method of the introduction of photochromic azobenzene-containing nematic mixture capable of isothermal photoinducing the nematic-isotropic phase transition into the porous polymer matrix is developed. It is found that cross-linking density and degree of polymer network filling with a photochromic nematic mixture strongly influence the photo-optical behavior of the obtained composite films. In particular, the densely cross-linked films are characterized by a decrease in selective light reflection bandwidth, whereas weakly cross-linked systems display two processes: the shift of selective light reflection peak and decrease of its width. It is noteworthy that the obtained cholesteric materials are shown to be very promising for the variety applications in optoelectronics and photonics.

Photoinduced Changes of Surface Topography in Amorphous, Liquid-Crystalline, and Crystalline Films of Bent-Core Azobenzene-Containing Substance.

Recently, photofluidization and mass-transfer effects have gained substantial interest because of their unique abilities of photocontrolled manipulation with material structure and physicochemical properties. In this work, the surface topographies of amorphous, nematic, and crystalline films of an azobenzene-containing bent-core (banana-shaped) compound were studied using a special experimental setup combining polarizing optical microscopy and atomic force microscopy. Spin-coating or rapid cooling of the samples enabled the formation of glassy amorphous or nematic films of the substance. The effects of UV and visible-light irradiation on the surface roughness of the films were investigated. It was found that UV irradiation leads to the fast isothermal transition of nematic and crystalline phases into the isotropic phase. This effect is associated with E-Z photoisomerization of the compound accompanied by a decrease of the anisometry of the bent-core molecules. Focused polarized visible-light irradiation (457.9 nm) results in mass-transfer phenomena and induces the formation of so-called "craters" in amorphous and crystalline films of the substance. The observed photofluidization and mass-transfer processes allow glass-forming bent-core azobenzene-containing substances to be considered for the creation of promising materials with photocontrollable surface topographies. Such compounds are of principal importance for the solution of a broad range of problems related to the investigation of surface phenomena in colloid and physical chemistry, such as surface modification for chemical and catalytic reactions, predetermined morphology of surfaces and interfaces in soft matter, and chemical and biochemical sensing.

Photochromic Composite for Random Lasing Based on Porous Polypropylene Infiltrated with Azobenzene-Containing Liquid Crystalline Mixture.

We report on a new low-cost and easily fabricated type of liquid crystalline polymer composites demonstrating low threshold random lasing, which can be used as a cheap and simple mirror-less laser source. The composite is based on mass-producible commercially available porous polypropylene (Celgard 2500) infiltrated with low-molar-mass liquid crystal material doped with Rhodamine 800 laser dye. Excitation with red nanosecond laser (630 nm) induces random lasing with the emission peak in NIR spectral range (804 nm) with noticeable degree of linear polarization. The possibility to control the lasing threshold and polarization of the output light with UV radiation through photoswitching of liquid crystal phase from nematic to isotropic is demonstrated. The photocontrollable phase switching is achieved by reversible E/Z isomerization of the azobenzene dopant introduced to the nematic host matrix. It is revealed that the isotropic state of liquid crystal provides more efficient random lasing with lower threshold due to significant scattering of the ordinary wave.

Surface Relief Changes in Cholesteric Cyclosiloxane Oligomer Films at Different Temperatures.

The development of new approaches for the surface topography control is an important topic as the relief significantly affects physical and chemical properties of surfaces. We studied cholesteric cyclosiloxane oligomeric films on which surface focal conic domains with double-helix pattern were observed by means of AFM. In situ investigation of the dependence of the films topography on temperature showed that the surface relief formation can be effectively managed by varying conditions of thermal treatment. Obtained structures can be frozen by cooling the films below glass-transition temperature.

Stable selective gratings in LC polymer by photoinduced helix pitch modulation.

A cholesteric mixture based on the nematic liquid crystalline side-chain polymer doped with a chiral-photochromic compound was prepared and used as an active medium for creation of stable polarization selective gratings by phototunable modulation of the helix pitch. Such modulation was fabricated in the polymer mixture by a nonpolarized UV-irradiation with spatially modulated intensity that causes E-Z isomerization of a chiral-photochromic dopant, decreasing its helical twisting power. It was shown that the gratings recorded by UV-exposure through a mask are strongly selective to the handedness of circular polarized light. The studied polymer film forms a right-handed helical structure and, correspondingly, the diffraction of only the right-circularly polarized light was found in the transmittance mode. The maximum diffraction efficiencies were found for the wavelength values between the maxima of selective light reflection. The films obtained open very interesting possibilities for further development of materials with stable gratings operating in the entire visible spectral range. Both the position and the width of the spectral range of an efficient diffraction can be easily controlled by the UV exposure and concentration of the dopant. The materials obtained and methods developed can be used for creation of specific diffraction elements for optics and photonics.

Combined scanning probe nanotomography and optical microspectroscopy: a correlative technique for 3D characterization of nanomaterials.

Combination of 3D structural analysis with optical characterization of the same sample area on the nanoscale is a highly demanded approach in nanophotonics, materials science, and quality control of nanomaterial. We have developed a correlative microscopy technique where the 3D structure of the sample is reconstructed on the nanoscale by means of a "slice-and-view" combination of ultramicrotomy and scanning probe microscopy (scanning probe nanotomography, SPNT), and its optical characteristics are analyzed using microspectroscopy. This approach has been used to determine the direct quantitative relationship of the 3D structural characteristics of nanovolumes of materials with their microscopic optical properties. This technique has been applied to 3D structural and optical characterization of a hybrid material consisting of cholesteric liquid crystals doped with fluorescent quantum dots (QDs) that can be used for photochemical patterning and image recording through the changes in the dissymmetry factor of the circular polarization of QD emission. The differences in the polarization images and fluorescent spectra of this hybrid material have proved to be correlated with the arrangement of the areas of homogeneous distribution and heterogeneous clustering of QDs. The reconstruction of the 3D nanostructure of the liquid crystal matrix in the areas of homogeneous QDs distribution has shown that QDs do not perturb the periodic planar texture of the cholesteric liquid crystal matrix, whereas QD clusters do perturb it. The combined microspectroscopy-nanotomography technique will be important for evaluating the effects of nanoparticles on the structural organization of organic and liquid crystal matrices and biomedical materials, as well as quality control of nanotechnology fabrication processes and products.

Atomic force microscopy study of surface topography of films of cholesteric oligomer- and polymer-based mixtures with photovariable helix pitch.

The surface topography of glass-forming polymers and oligomer cholesteric systems with a phototunable helix pitch was studied. For this purpose several mixtures based on nematic polyacrylate and cholesteric cyclosiloxanes doped with chiral-photochromic dopant were prepared and investigated. The molecules of chiral-photochromic dopant consist of isosorbide chiral moiety and cinnamic C=C double bonds capable of E-Z photoisomerizing. UV irradiation of the planarly oriented films of mixtures leads to dopant photoisomerization and changes of its helical twisting power. During this process irreversible changes of helix pitch values take place, which allows one to obtain the same cholesteric systems with different helix pitch values. The films of the annealed mixtures were studied by atomic force microscopy and transmission electron microscopy. The correlations between the features of surface topography and helix pitch of cholesteric supramolecular structure were found and discussed.

Optically and electrically controlled circularly polarized emission from cholesteric liquid crystal materials doped with semiconductor quantum dots.

Novel types of electro- and photoactive quantum dot-doped cholesteric materials have been engineered. UV-irradiation or electric field application allows one to control the degree of circular polarization and intensity of fluorescence emission by prepared quantum dot-doped liquid crystal films.

A novel type of crown ether-containing metal ions optical sensors based on polymer-stabilized cholesteric liquid crystalline films.

For the first time, the films based on polymer-stabilized cholesteric composites containing crown ether fragments with the optical properties sensitive to the complexation with potassium and barium ions were obtained. The complexation with these ions leads to blue spectral shift of the selective light reflection of planar cholesteric texture of composite films. Peculiarities of spectral changes and kinetics of selective light reflection shift were studied. The proposed approach can be used for the creation of the effective and selective sensor materials for different ions or groups of ions.

Novel generation of liquid crystalline photo-actuators based on stretched porous polyethylene films.

The preparation of photo-actuators based on stretched porous polyethylene and an azobenzene-containing liquid crystalline polymer network is reported for the first time. It is revealed that this kind of photo-actuator possesses the following advantages: the lack of a need for using aligning coatings and cells preparation, high deformation of the actuator and its complete reversibility, good mechanical properties, and relatively low cost of fabrication. In addition some kinetic and thermodynamic features of the bending and unbending processes have been studied.

Laser-induced holographic light scattering in a liquid-crystalline azobenzene-containing polymer.

The holographic scattering phenomenon was observed and studied in detail for azobenzene-containing polymer system. It was found that irradiation of 25-µm-thick samples of the polymer with a single linearly polarized laser beam results in the appearance of a band with the maximum in the vicinity of irradiating wavelength in polarized extinction spectra. The band is completely polarized along the polarization direction of irradiating light. The shape of the band is exceedingly sensitive to rotation of the sample with respect to the spectrometer probe beam. An analogous band appears upon the irradiation of the sample with circularly polarized light. The observed phenomenon is presumably similar to holographic scattering, reported previously in photorefractive crystals and some photopolymers. A detailed description of the observed spectral changes is presented. The sensitivity of the effect towards probe light polarization and direction, irradiating light wavelength, and temperature is discussed.

Cholesteric polymer guest-host mixture with circularly polarized fluorescence: two ways for phototuning of polarization and its intensity.

A photosensitive fluorescent cholesteric guest-host mixture consisting of a nematic polyacrylate, a chiral, photochromic dopant sensitive to UV light, and a fluorescent dopant was prepared. The nematic polyacrylate contains 4-phenyl-4'-methoxybenzoate nematogenic side groups and photochromic 4-cyanoazobenzene side groups. The chiral-photochromic dopant formed by isosorbide and cinnamic acid is capable of E-Z photoisomerization and [2 + 2] photo-cycloaddition under light irradiation. The planarly oriented films possess a selective light reflection in the visible spectral region coinciding with the emission peak of the fluorescent dopant. The fluorescence emitted by the planarly oriented films of the mixture is strongly circularly polarized and characterized by a large value of the dis-symmetry factor. At temperatures below glass transition (T(g)) the polarized light action of an Ar(+) laser (488 nm) leads to the photo-orientation of the azobenzene fragments resulting in a strong and reversible disruption of the selective reflection and a decrease of the dis-symmetry factor of fluorescence. UV irradiation leads to E-Z isomerization and/or [2 + 2] cycloaddition of the chiral-photochromic dopant, causing an irreversible shift of the maximum of the dis-symmetry factor to a long-wavelength spectral region under subsequent annealing at temperatures higher than T(g). Such multifunctional glass-forming guest-host mixtures combining photosensitive and fluorescent properties with the unique optical properties of cholesteric liquid crystals can be considered as promising material for optical data processing technologies and photonic applications.