ABSTRACT
Instabilities and fluctuations of the plasma jet in a thermal spray process can have a significant influence on the particle in-flight temperatures and velocities, affecting the properties of resulting plasma-sprayed coatings. Presented in this paper is a novel method for capturing the effects particles are exposed to in the plasma spraying process. High-speed camera images of a plasma jet generated by a cascaded three-cathode plasma generator (TriplexPro-210) were recorded for varying operating conditions. The images are processed using the inverse Abel transform. This transformation accounts for the fact that the images represent a 2D projection of the 3D jet and generates more accurate intensity values that the sprayed particles would experience. These images are then combined with particle tracks resulting from CFD simulations of the plasma jet to match the particles path with the recorded plasma jet. This new method allows a precise description of the plasma intensity experienced by individual particles with a high temporal resolution. The results show a high sensitivity of the method, even detecting the influence on the particles of the plasma jet originating from the cascaded triple arc plasma generator, which is considered as rather stable.
ABSTRACT
A large-chamber scanning electron microscope (LC-SEM) provides an ideal platform for the installation of large-scale in situ experiments. Our LC-SEM has internal chamber dimensions of 1,2â¯×â¯1,3â¯×â¯1,4 m3 (W × H × D) (Fig.1) and makes it possible to incorporate novel in situ experimental devices, which are reported on here. The present manuscript describes in detail the development of in situ test equipment for the study of a broad range of processes in production engineering. Direct observation of the materials modification mechanisms provides fundamental insight into the underlying process characteristics. An in situ turning device was developed, tested and used to observe the chip formation on the microstructure scale of a 43CrMo4-sample. Laser beam micro welding was integrated into the LC-SEM to achieve in situ analysis of the welding process on stainless steel 1.4310. A heating module was employed for in situ wetting experiments to observe the formation and solidification of the melt of a tin-copper brazing filler on an aluminium cast alloy.
ABSTRACT
Molding of nano structures by injection molding leads to special requirements for the tools e.g., wear resistance and as low as possible release forces of the molded components. On the other hand it is not allowed to affect the replication precision. Physical vapor deposition is one of the promising technologies for applying coatings with adapted properties like high hardness, low roughness, low Young's modulus and less adhesion to the plastics melt. Although physical vapor deposition technology allows the deposition of films on micro structures without changing the structure significantly, film deposition on nano structures and small micro structures leads to a relevant change in surface topography. For this reason direct structuring of physical vapor deposition coatings might be beneficial. In this paper structuring was done using a picoseconds ultraviolet laser, Lumera Laser "Rapid," with a master oscillator power amplifier system at 355 nm. Two different coatings were deposited by magnetron sputter ion plating physical vapor deposition technology for laser structuring tests ((Cr, Al)N, (Cr, Al,Si)N). After deposition, the coatings were analyzed by common techniques regarding hardness, Young's modulus and morphology. The structures were analyzed by scanning electron microscopy. The results show a high potential for laser structuring of coatings deposited via physical vapor deposition. Linear structures with sizes between 400 nm and 10microm were realized.
ABSTRACT
The process of thixoforming, which has been part of many researches during the last decades, combines the advantages of forging and casting for the shaping of metallic components. But due to the high temperatures of semi-solid steel alloys high demands on the tools are requested. To resists the thermal and mechanical loads (wear, friction, thermal and thermomechanical fatigue) protecting thin films are necessary. In this regard crystalline gamma-Al2O3 deposited via Physical Vapour Deposition (PVD) is a promising candidate: It exhibits high thermal stability, high oxidation resistance and high hot hardness. In the present work the application of a (Ti, Al)N/gamma-Al2O3 coating deposited by means of Magnetron Sputter Ion Plating in an industrial coating unit is presented. The coating was analysed by means of Rockwell test, nanoindentation, and Scanning Electron Microscopy (SEM). The coated tool was tested in thixoforging experiments with steel grade X210CrW12 (AlSI D6). The surface of the coated dies was examined with Scanning Electron Microscope (SEM) after 22, 42, 90 and 170 forging cycles.
