ABSTRACT
A novel technique that can be used for reacting toxic carbon dioxide (CO2) emissions from power plants and other combustion wastes with sea water is described. A chemical interaction between CO2 and the cations in sea water, with the pH electrolytically regulated, can precipitate almost all the calcium and magnesium ions, as well as some sodium and potassium ions, as carbonates and bicarbonates. The carbonates and bicarbonates thus prepared can then be mixed with ash to yield a building material. Sulfur ions will be neutralized with calcium and magnesium, and the remaining ions can be removed using reverse osmosis or some other method. The technology and equipment for purification are based on modules that can be used for industrial waste-water, sea water, solutions, and otherwise. The module for separation of sand and suspended coarse substances consists of a tank for flocculation, coagulation, and precipitation of solid particles; and a low-pressure hydrocyclone. The module for purification from oil and fine suspensions is based on column flotation, flotation with a special ejector, and adhesion flotation. The module for ions and colloids consists of an absorbing filter with zeolite, fly ash, and other absorbing materials. Using a laboratory model consisting of a special mini-plant, we processed 10 L of factory-waste water containing more than 20 g/L organic content (compare with the upper limit of 0.02 g/L allowed by the Ministry of Environmental Protection in Israel). After the experimental solution was treated and evaporated to a small bulk, the water obtained was almost clear. On the basis of the results in the model, we present a scaled-up process for the design, development, and production of equipment for and the assembly of a large installation for drainage and water purification.
