A Nitrite Excipient Database: A Useful Tool to Support N-Nitrosamine Risk Assessments for Drug Products.

N-Nitrosamine risk assessment and control have become an integral part of pharmaceutical drug product development and quality evaluation. Initial reports of nitrosamine contamination were linked with the drug substance and its manufacturing process. Subsequently, the drug product and aspects of the formulation process have shown to be relevant. Regarding specific formulation contributions to nitrosamine content in a product, one risk lies in possible interactions between nitrosating agents, derived from nitrite in excipients, and vulnerable amines, either present as moieties of the active molecule or as impurities / degradants. However, the limited validated information on nitrite levels in excipients available until now, has been an obstacle for scientists to assess the risk of nitrosamine formation in pharmaceutical products. This has driven the creation of a database to store and share such validated information. The database, maintained by Lhasa Limited, constitutes a central platform to hold the data donated by the pharmaceutical company members on the nitrite concentrations in common excipients measured with validated analytical procedures. The goal of this data sharing initiative is to provide a common framework to contextualize and estimate the risk posed by presence of nitrites to contribute to the formation of nitrosamines in drug products. The major findings from the database analyses are: (1) average nitrite content and batch to batch variance differ among excipients, (2) for solid dosage forms, the nitrite contribution is dominated by the highest formula % excipients, e.g., the fillers (diluents), which are typically used in larger proportion, and are characterized by low nitrite levels and low variability, leading to an average value of 1 µg/g nitrite in a typical formulation, (3) substantial differences in average nitrite content in batches from different excipient vendors potentially reflecting differences in source materials or processing methods for excipient manufacturing. That final point suggests that future selection of raw materials or processing by excipient manufacturers may help reduce nitrite levels in finished drug product formulations, and thus the overall risk of nitrosamine formation in cases where the product contains vulnerable amines.

ICH Q3D Drug Product Elemental Risk Assessment: The Use of An Elemental Impurities Excipients Database.

The purpose of this publication is to show how an elemental impurities excipient database can be used in assisting the execution of a drug product elemental impurities risk assessment as required by the ICH Q3D guidelines. As a result of this exercise, we have demonstrated that the database, used in conjugation with other sources of information, is a credible source of elemental impurity levels in excipients therefore, a valuable source of information in completion of drug product risk assessments. This useful collection of data helps to reduce the burden of analytical testing for elemental impurities in excipients.

An Elemental Impurities Excipient Database: A Viable Tool for ICH Q3D Drug Product Risk Assessment.

To support the practical implementation of the International Council for Harmonisation (ICH) Q3D guideline, which describes a risk-based approach to the control of elemental impurities in drug products, a consortium of pharmaceutical companies has established a database to collate the results of analytical studies of the levels of elemental impurities within pharmaceutical excipients. This database currently includes the results of 26,723 elemental determinations for 201 excipients and represents the largest known, and still rapidly expanding, collection of data of this type. Analysis of the database indicates good coverage of excipients relevant to real-world drug product formulations and tested element profiles consistent with ICH Q3D recommendations. The database includes the results from multiple analytical studies for an excipient and thus incorporates within it an indication of both excipient supplier and batch-to-batch variability as well as any variability associated with the different testing organizations and methods employed. The data confirm the findings of earlier smaller studies that elemental impurity concentrations in excipients are generally low and when used in typical proportions in formulated drug products are unlikely to pose a significant patient safety risk. The database is now in active use as one line of evidence in ICH Q3D risk assessments.

The structural and energetic basis for high selectivity in a high-affinity protein-protein interaction.

High-affinity, high-selectivity protein-protein interactions that are critical for cell survival present an evolutionary paradox: How does selectivity evolve when acquired mutations risk a lethal loss of high-affinity binding? A detailed understanding of selectivity in such complexes requires structural information on weak, noncognate complexes which can be difficult to obtain due to their transient and dynamic nature. Using NMR-based docking as a guide, we deployed a disulfide-trapping strategy on a noncognate complex between the colicin E9 endonuclease (E9 DNase) and immunity protein 2 (Im2), which is seven orders of magnitude weaker binding than the cognate femtomolar E9 DNase-Im9 interaction. The 1.77 A crystal structure of the E9 DNase-Im2 complex reveals an entirely noncovalent interface where the intersubunit disulfide merely supports the crystal lattice. In combination with computational alanine scanning of interfacial residues, the structure reveals that the driving force for binding is so strong that a severely unfavorable specificity contact is tolerated at the interface and as a result the complex becomes weakened through "frustration." As well as rationalizing past mutational and thermodynamic data, comparing our noncognate structure with previous cognate complexes highlights the importance of loop regions in developing selectivity and accentuates the multiple roles of buried water molecules that stabilize, ameliorate, or aggravate interfacial contacts. The study provides direct support for dual-recognition in colicin DNase-Im protein complexes and shows that weakened noncognate complexes are primed for high-affinity binding, which can be achieved by economical mutation of a limited number of residues at the interface.

Self-recognition by an intrinsically disordered protein.

The intrinsically disordered translocation domain (T-domain) of the protein antibiotic colicin N binds to periplasmic receptors of target Escherichia coli cells in order to penetrate their inner membranes. We report here that the specific 27 consecutive residues of the T-domain of colicin N known to bind to the helper protein TolA in target cells also interacts intramolecularly with folded regions of colicin N. We suggest that this specific self-recognition helps intrinsically disordered domains to bury their hydrophobic recognition motifs and protect them against degradation, showing that an impaired self-recognition leads to increased protease susceptibility.

Structure and Cu(I)-binding properties of the N-terminal soluble domains of Bacillus subtilis CopA.

CopA, a P-type ATPase from Bacillus subtilis, plays a major role in the resistance of the cell to copper by effecting the export of the metal across the cytoplasmic membrane. The N-terminus of the protein features two soluble domains (a and b), that each contain a Cu(I)-binding motif, MTCAAC. We have generated a stable form of the wild-type two-domain protein, CopAab, and determined its solution structure. This was found to be similar to that reported previously for a higher stability S46V variant, with minor differences mostly confined to the Ser(46)-containing beta3-strand of domain a. Chemical-shift analysis demonstrated that the two Cu(I)-binding motifs, located at different ends of the protein molecule, are both able to participate in Cu(I) binding and that Cu(I) is in rapid exchange between protein molecules. Surprisingly, UV-visible and fluorescence spectroscopy indicate very different modes of Cu(I) binding below and above a level of 1 Cu(I) per protein, consistent with a major structural change occurring above 1 Cu(I) per CopAab. Analytical equilibrium centrifugation and gel filtration results show that this is a result of Cu(I)-mediated dimerization of the protein. The resulting species is highly luminescent, indicating the presence of a solvent-shielded Cu(I) cluster.

Flexibility in the receptor-binding domain of the enzymatic colicin E9 is required for toxicity against Escherichia coli cells.

The events that occur after the binding of the enzymatic E colicins to Escherichia coli BtuB receptors that lead to translocation of the cytotoxic domain into the periplasmic space and, ultimately, cell killing are poorly understood. It has been suggested that unfolding of the coiled-coil BtuB receptor binding domain of the E colicins may be an essential step that leads to the loss of immunity protein from the colicin and immunity protein complex and then triggers the events of translocation. We introduced pairs of cysteine mutations into the receptor binding domain of colicin E9 (ColE9) that resulted in the formation of a disulfide bond located near the middle or the top of the R domain. After dithiothreitol reduction, the ColE9 protein with the mutations L359C and F412C (ColE9 L359C-F412C) and the ColE9 protein with the mutations Y324C and L447C (ColE9 Y324C-L447C) were slightly less active than equivalent concentrations of ColE9. On oxidation with diamide, no significant biological activity was seen with the ColE9 L359C-F412C and the ColE9 Y324C-L447C mutant proteins; however diamide had no effect on the activity of ColE9. The presence of a disulfide bond was confirmed in both of the oxidized, mutant proteins by matrix-assisted laser desorption ionization-time of flight mass spectrometry. The loss of biological activity of the disulfide-containing mutant proteins was not due to an indirect effect on the properties of the translocation or DNase domains of the mutant colicins. The data are consistent with a requirement for the flexibility of the coiled-coil R domain after binding to BtuB.

Concerted folding and binding of a flexible colicin domain to its periplasmic receptor TolA.

Compared with folded structures, natively unfolded protein domains are over-represented in protein-protein and protein-DNA interactions. Such domains are common features of all colicins and are required for their translocation across the outer membrane of the target Escherichia coli cell. All of these domains bind to at least one periplasmic protein of the Tol or Ton family. Similar domains are found in Ton-dependent outer membrane transporters, indicating they may interact in a related manner. In this article we have studied binding of the colicin N translocation domain to its periplasmic receptor TolA, by fluorescence resonance energy transfer (FRET) using fluorescent probes attached to engineered cysteine residues and NMR techniques. The domain exhibits a random coil circular dichroism spectrum. However, FRET revealed that guanidinium hydrochloride denaturation caused increases in all measured intramolecular distances showing that, although natively unfolded, the domain is not extended. Furthermore NMR reported a compact hydrodynamic radius of 18 A. Nevertheless the FRET-derived distances changed upon binding to TolA indicating a significant structural rearrangement. Using 1H-15N NMR we show that, when bound, the peptide switches from a disordered state to an ordered state. The kinetics of binding and the associated structural change were measured by stopped-flow methods, and both events appear to occur simultaneously. The data therefore suggest that this molecular recognition involves the concerted binding and folding of a flexible but collapsed state.

Structural dynamics of the receptor-binding domain of colicin E9.

Colicin E9 is a 61 kDa antibacterial protein secreted by E. coli. In order for it to enter the cytoplasm of susceptible bacteria and kill them by hydrolysing their DNA, the colicin must first interact with an outer membrane receptor on the target cell, BtuB, and a translocation pathway involving Tol proteins. The receptor binding, translocation and DNase functions of colicin E9 are housed in discrete structural domains, which have been independently expressed and characterized. The minimal receptor-binding domain is a 76 amino acid protein (min-R). X-ray structure determination of a related colicin shows its receptor-binding-domain to have a helical hairpin structure (S. Soelaiman, K. Jakes, N. Wu, C. Li and M. Shoham, Molecular Cell. 2001, 8, 1053). Our solution NMR studies of min-R have confirmed it has a helical hairpin structure, and shown it has multiple slowly interchanging conformers and a flexible inter-helix loop. A plausible interpretation of these data is that in solution the helical hairpin can adopt a variety of structures differing in the spatial relationship of the two helices. A possible biological role for this involves the hairpin opening during translocation into bacteria.

Structural dynamics of the membrane translocation domain of colicin E9 and its interaction with TolB.

In order for the 61 kDa colicin E9 protein toxin to enter the cytoplasm of susceptible cells and kill them by hydrolysing their DNA, the colicin must interact with the outer membrane BtuB receptor and Tol translocation pathway of target cells. The translocation function is located in the N-terminal domain of the colicin molecule. (1)H, (1)H-(1)H-(15)N and (1)H-(13)C-(15)N NMR studies of intact colicin E9, its DNase domain, minimal receptor-binding domain and two N-terminal constructs containing the translocation domain showed that the region of the translocation domain that governs the interaction of colicin E9 with TolB is largely unstructured and highly flexible. Of the expected 80 backbone NH resonances of the first 83 residues of intact colicin E9, 61 were identified, with 43 of them being assigned specifically. The absence of secondary structure for these was shown through chemical shift analyses and the lack of long-range NOEs in (1)H-(1)H-(15)N NOESY spectra (tau(m)=200 ms). The enhanced flexibility of the region of the translocation domain containing the TolB box compared to the overall tumbling rate of the protein was identified from the relatively large values of backbone and tryptophan indole (15)N spin-spin relaxation times, and from the negative (1)H-(15)N NOEs of the backbone NH resonances. Variable flexibility of the N-terminal region was revealed by the (15)N T(1)/T(2) ratios, which showed that the C-terminal end of the TolB box and the region immediately following it was motionally constrained compared to other parts of the N terminus. This, together with the observation of inter-residue NOEs involving Ile54, indicated that there was some structural ordering, resulting most probably from the interactions of side-chains. Conformational heterogeneity of parts of the translocation domain was evident from a multiplicity of signals for some of the residues. Im9 binding to colicin E9 had no effect on the chemical shifts or other NMR characteristics of the region of colicin E9 containing the TolB recognition sequence, though the interaction of TolB with intact colicin E9 bound to Im9 did affect resonances from this region. The flexibility of the translocation domain of colicin E9 may be connected with its need to recognise protein partners that assist it in crossing the outer membrane and in the translocation event itself.

PrrC from Rhodobacter sphaeroides, a homologue of eukaryotic Sco proteins, is a copper-binding protein and may have a thiol-disulfide oxidoreductase activity.

PrrC from Rhodobacter sphaeroides provides the signal input to a two-component signal transduction system that senses changes in oxygen tension and regulates expression of genes involved in photosynthesis (Eraso, J.M. and Kaplan, S. (2000) Biochemistry 39, 2052-2062; Oh, J.-I. and Kaplan, S. (2000) EMBO J. 19, 4237-4247). It is also a homologue of eukaryotic Sco proteins and each has a C-x-x-x-C-P sequence. In mitochondrial Sco proteins these cysteines appear to be essential for the biogenesis of the CuA centre of respiratory cytochrome oxidase. Overexpression and purification of a water-soluble and monomeric form of PrrC has provided sufficient material for a chemical and spectroscopic study of the properties of the four cysteine residues of PrrC, and its ability to bind divalent cations, including copper. PrrC expressed in the cytoplasm of Escherichia coli binds Ni2+ tightly and the data are consistent with a mononuclear metal site. Following removal of Ni2+ and formation of renatured metal-free rPrrC (apo-PrrC), Cu2+ could be loaded into the reduced form of PrrC to generate a protein with a distinctive UV-visible spectrum, having absorbance with a lambda(max) of 360 nm. The copper:PrrC ratio is consistent with the presence of a mononuclear metal centre. The cysteines of metal-free PrrC oxidise in the presence of air to form two intramolecular disulfide bonds, with one pair being extremely reactive. The cysteine thiols with extreme O2 sensitivity are involved in copper binding in reduced PrrC since the same copper-loaded protein could not be generated using oxidised PrrC. Thus, it appears that PrrC, and probably Sco proteins in general, could have both a thiol-disulfide oxidoreductase function and a copper-binding role.