Polyelectrolyte pH-Responsive Protein-Containing Nanoparticles: The Physicochemical Supramolecular Approach.

We report on the physicochemical properties and self-assembly behavior of novel efficient pH-sensitive nanocontainers based on the Food and Drug Administration-approved anionic polymer Eudragit L100-55 (poly(methacrylic acid-co-ethyl acrylate) 1:1) and nonionic surfactant Brij98. The features of the interaction between Eudragit L100-55 and Brij98 at different pH values and their optimal ratio for nanoparticle formation were studied using isothermal titration calorimetry. The influence of the polymer-to-surfactant ratio on the size and structure of particles was studied at different pH values using dynamic light scattering and small-angle X-ray scattering methods. It was shown that stable nanoparticles are formed at acidic pH at polymer-to-surfactant molar ratios from 1:43 to 1:139. Trypsin was successfully encapsulated into Eudragit-Brij98 nanoparticles as a model bioactive component. The loading efficiency was determined by labeling trypsin with radioactive iodine-125. Eudragit-Brij98 nanoparticles effectively protected trypsin against pepsin digestion. The results showed that trypsin encapsulated into novel pH-sensitive nanocontainers retained more than 50% of its activity after treatment with pepsin compared with nonencapsulated trypsin. The described concept will contribute both to understanding the principles of and designing next-generation nanocontainers.

Thermodynamics of the multi-stage self-assembly of pH-sensitive gradient copolymers in aqueous solutions.

The self-assembly thermodynamics of pH-sensitive di-block and tri-block gradient copolymers of acrylic acid and styrene was studied for the first time using isothermal titration calorimetry (ITC) and dynamic light scattering (DLS) performed at varying pH. We were able to monitor each step of micellization as a function of decreasing pH. The growth of micelles is a multi-stage process that is pH dependent with several exothermic and endothermic components. The first step of protonation of the acrylic acid monomer units was accompanied mainly by conformational changes and the beginning of self-assembly. In the second stage of self-assembly, the micelles become larger and the number of micelles becomes smaller. While solution acidity increases, the isothermal calorimetry data show a broad deep minimum corresponding to an exothermic process attributed to an increase in the size of hydrophobic domains and an increase in the structure's hydrophobicity. The minor change in heat capacity (ΔCp) confirms the structural changes during this exothermic process. The exothermic process terminates deionization of acrylic acid. The pH-dependence of the ζ-potential of the block gradient copolymer micelles exhibits a plateau in the regime corresponding to the pH-controlled variation of the micellar dimensions. The onset of micelle formation and the solubility of the gradient copolymers were found to be dependent on the length of the gradient block.

Internal Nanoparticle Structure of Temperature-Responsive Self-Assembled PNIPAM-b-PEG-b-PNIPAM Triblock Copolymers in Aqueous Solutions: NMR, SANS, and Light Scattering Studies.

In this study, we report detailed information on the internal structure of PNIPAM-b-PEG-b-PNIPAM nanoparticles formed from self-assembly in aqueous solutions upon increase in temperature. NMR spectroscopy, light scattering, and small-angle neutron scattering (SANS) were used to monitor different stages of nanoparticle formation as a function of temperature, providing insight into the fundamental processes involved. The presence of PEG in a copolymer structure significantly affects the formation of nanoparticles, making their transition to occur over a broader temperature range. The crucial parameter that controls the transition is the ratio of PEG/PNIPAM. For pure PNIPAM, the transition is sharp; the higher the PEG/PNIPAM ratio results in a broader transition. This behavior is explained by different mechanisms of PNIPAM block incorporation during nanoparticle formation at different PEG/PNIPAM ratios. Contrast variation experiments using SANS show that the structure of nanoparticles above cloud point temperatures for PNIPAM-b-PEG-b-PNIPAM copolymers is drastically different from the structure of PNIPAM mesoglobules. In contrast with pure PNIPAM mesoglobules, where solidlike particles and chain network with a mesh size of 1-3 nm are present, nanoparticles formed from PNIPAM-b-PEG-b-PNIPAM copolymers have nonuniform structure with "frozen" areas interconnected by single chains in Gaussian conformation. SANS data with deuterated "invisible" PEG blocks imply that PEG is uniformly distributed inside of a nanoparticle. It is kinetically flexible PEG blocks which affect the nanoparticle formation by prevention of PNIPAM microphase separation.

Self-assembly thermodynamics of pH-responsive amino-acid-based polymers with a nonionic surfactant.

The behavior of pH-responsive polymers poly(N-methacryloyl-l-valine) (P1), poly(N-methacryloyl-l-phenylalanine) (P2), and poly(N-methacryloylglycyne-l-leucine) (P3) has been studied in the presence of the nonionic surfactant Brij98. The pure polymers phase-separate in an acidic medium with critical pHtr values of 3.7, 5.5, and 3.4, respectively. The addition of the surfactant prevents phase separation and promotes reorganization of polymer molecules. The nature of the interaction between polymer and surfactant depends on the amino acid structure in the side chain of the polymer. This effect was investigated by dynamic light scattering, isothermal titration calorimetry, electrophoretic measurements, small-angle neutron scattering, and infrared spectroscopy. Thermodynamic analysis revealed an endothermic association reaction in P1/Brij98 mixture, whereas a strong exothermic effect was observed for P2/Brij98 and P3/Brij98. Application of regular solution theory for the analysis of experimental enthalpograms indicated dominant hydrophobic interactions between P1 and Brij98 and specific interactions for the P2/Brij98 system. Electrophoretic and dynamic light scattering measurements support the applicability of the theory to these cases. The specific interactions can be ascribed to hydrogen bonds formed between the carboxylic groups of the polymer and the oligo(ethylene oxide) head groups of the surfactant. Thus, differences in polymer-surfactant interactions between P1 and P2 polymers result in different structures of polymer-surfactant complexes. Specifically, small-angle neutron scattering revealed pearl-necklace complexes and "core-shell" structures for P1/Brij98 and P2/Brij98 systems, respectively. These results may help in the design of new pH-responsive site-specific micellar drug delivery systems or pH-responsive membrane-disrupting agents.

Coiled coil peptides and polymer-peptide conjugates: synthesis, self-assembly, characterization and potential in drug delivery systems.

Coiled coils are a common structural motif in many natural proteins that can also be utilized in the design and preparation of drug delivery systems for the noncovalent connection of two macromolecules. In this work, two different pairs of peptides forming coiled coil hetero-oligomers were designed, synthesized, and characterized. While the peptide sequences (VAALEKE)4 and (VAALKEK)4 predominantly form coiled coil heterodimers with randomly orientated peptide chains, (IAALESE)2-IAALESKIAALESE and IAALKSKIAALKSE-(IAALKSK)2 tend to form higher hetero-oligomers with an antiparallel orientation of their peptide chains. The associative behavior of these peptides was studied in aqueous solutions using circular dichroism spectroscopy, size-exclusion chromatography, isothermal titration calorimetry and sedimentation analyses. The orientation of the peptide chains in the coiled coil heterodimers was assessed using fluorescence spectroscopy with fluorescence resonance energy transfer labels attached to the ends of the peptides. The formation of the heterodimer can be used as a general method for the selective noncovalent conjugation of a specific targeting moiety with various drug carrier systems; this process involves simple self-assembly in a physiological solution before drug administration. The preparation of targeted macromolecular therapeutics consisting of a synthetic polymer drug carrier and a recombinant protein targeting ligand is discussed.

Study of complex thermosensitive amphiphilic polyoxazolines and their interaction with ionic surfactants. Are hydrophobic, thermosensitive, and hydrophilic moieties equally important?

The temperature-driven self-assembly of nonionic amphiphilic tailor-made triblock copolymers has been studied by DLS, NMR, ITC, and SAXS. The composition of these triblock copolymers is more complex than that of the vast majority of poly(2-alkyl-2-oxazoline)s: a statistical thermoresponsive (iPrOx) and hydrophobic (BuOx) central block with terminal hydrophilic blocks (MeOx). In general, as temperature increases, nanoparticles form in a process starting with single molecules that become loose aggregates and ends with the formation of compact nanoparticles. Here, we first attempt to resolve the effects of each block on nanoparticle formation. It has been proven that the iPrOx/MeOx ratio determines the value of the cloud point temperature, whereas the different BuOx-iPrOx blocks determine the character of the process. Finally, we complete our investigation by presenting the thermodynamic and structural profiles of the complexation between these triblock poly(2-alkyl-2-oxazoline)s and two ionic surfactants. The addition of an ionic surfactant promotes a rearrangement of the polymer molecules and the formation of complexes followed by the appearance of polymer-surfactant hybrid micelles. Analysis of the interaction shows a strong and nonspecific reaction between the polymers and the anionic surfactant sodium dodecyl sulfate and weak but polymer-state-sensitive interactions between the polymer and the cationic surfactant hexadecyltrimethylammonium bromide.

Hydrolytically degradable polymer micelles for drug delivery: a SAXS/SANS kinetic study.

We report kinetic studies of therapeutically highly potent polymer-drug conjugates consisting of amphiphilic N-(2-hydroxypropyl) methacrylamide (HPMA)-based copolymers bearing the anticancer drug doxorubicin (Dox). Highly hydrophobic cholesterol moieties as well as the drug were attached to the polymer backbone by a pH-sensitive hydrazone bond. Moreover, the structure of the spacer between the polymer carrier and the cholesterol moiety differed in order to influence the release rate of the hydrophobic moiety, and thus the disintegration of the high-molecular-weight micellar nanoparticle structure. We performed time-dependent SAXS/SANS measurements after changing pH from a typical blood value (pH 7.2) to that of tumor cells (pH 5.0) to characterize the drug release and changes in particle size and shape. Nanoparticles composed of the conjugates containing Dox were generally larger than the drug-free ones. For most conjugates, nanoparticle growth or decay was observed in the time range of several hours. It was established that the growth/decay rate and the steady-state size of nanoparticles depend on the spacer structure. From analytical fitting, we conclude that the most probable structure of the nanoparticles was a core-shell or a core with attached Gaussian chains. We concluded that the spacer structure determined the fate of a cholesterol derivative after the pH jump. Fitting results for 5α-cholestan-3-onecholestan-3-one and cholesteryl-4-oxopentanoate (Lev-chol) implied that cholesterol moieties continuously escape from the core of the nanoparticle core and concentrate in the hydrophilic shell. In contrast, cholest-4-en-3-one spacer prevent cholesterol escaping. Dox moiety release was only observed after a change in pH. Such findings justify the model proposed in our previous paper. Lastly, the cholesteryl 4-(2-oxopropyl)benzoate (Opb-Chol) was a different case where after the release of hydrophobic Opb-Chol moieties, the core becomes more compact. The physicochemical mechanisms responsible for the scenarios of the different spacers are discussed.

Glycogen as a biodegradable construction nanomaterial for in vivo use.

It is demonstrated that glycogen as a biodegradable and inexpensive material coming from renewable resources can be used as a carrier for the construction of in vivo imaging nanoagents. The model system considered is composed of glycogen modified with gadolinium and fluorescent labels. Systematic studies of properties of these nanocarriers by a variety of physical methods and results of in vivo tests of biodegradability are reported. This represents, to the authors' best knowledge, the first such use of glycogen.

CTAB/water/chloroform reverse micelles: a closed or open association model?

The micellization of cetyltrimethylammonium bromide (CTAB) in chloroform in the presence of water was examined. Three scenarios of the reverse micelle formation, the closed, open and Eicke's association models, were considered in the interpretation of the experimental data. The growth of the aggregates was observed through the changes of NMR signals of associated water, probing the microenvironment of the premicellar aggregates and the interior of reverse micelles. This technique if combined with isothermal titration calorimetry (ITC) revealed that hydrated surfactant premicellar aggregates are already present at ∼6 mM CTAB. NMR, ITC and conductometry were used to determine the critical micelle concentration (cmc) to be ∼40 mM CTAB. It is suggested that the variation of the cmc values reflects the fact that the NMR analysis indicated the beginning of the reverse micelle formation, whereas conductometry and ITC measurements provided the upper limit and an average value of a so-called apparent cmc, respectively. The cmc values were found to be unaffected by the water content. The presence of reverse micelles, the existence of multiple equilibria, and high polydispersity of the samples were evidenced by DOSY NMR spectroscopy. As a result, we validated Eicke's association model, according to which cyclic inverse micelles are formed by a structural reorganization of linear associates within a narrow concentration range, called the apparent cmc. New experimental results have also been gained for micellization of cetyltrimethylammonium chloride (CTAC) in chloroform in the presence of water; a similar mechanism of reverse micelle formation has been suggested.

Thermoresponsive nanoparticles based on poly(2-alkyl-2-oxazolines) and Pluronic F127.

We synthesized statistical poly(2-isopropyl-2-oxazoline-co-2-butyl-2-oxazolines) (POXs) that are molecularly dissolved below their cloud point temperature in aqueous milieu and are incorporated into micellar nanoparticles of biocompatible Pluronic F127 (F127) after heating their solution above transition temperature, T(tr). A functional comonomer 2-(but-3-enyl)-2-oxazoline copolymerized into one of the POXs (polymer E) allows introduction of fenolic moieties and subsequent radionuclide labeling with iodine-125. Self-assembly of the polymer E with F127 leads to formation of radioactive nanoparticles with hydrodynamic diameter 20 nm in aqueous solution by heating to 37 °C. The nanoparticles are intended to be used as radioimaging tool in solid tumor diagnostics.