Functionalization of ceramic tile surface by sol-gel technique.

The aim of this investigation was the surface functionalization of industrial ceramic tiles by sol-gel technique to improve at the same time the cleanability of unglazed surfaces. This objective was pursued through the design and preparation of nanostructured coating that was deposited on polished unglazed tiles by air-brushing. In particular TiO(2)-SiO(2) binary film with 1, 2 or 5wt% of titania were prepared by using tetraethoxysilane and titania nanoparticles as precursors. The obtained films were characterized by scratch tests to verify the adhesion of the coatings to the polished tiles. To mainly evaluate the effect of the thermal treatment (temperature range 100-600 degrees C) on the photocatalicity of the coatings, the films were studied under UV exposure by contact angle measurements and cleanability test. Particular attention has been paid to preserve the aesthetical aspect of the final product and the obtained hue variation was evaluated by means of UV-visible spectroscopy and colorimetric analysis.

Synthesis of chromium containing pigments from chromium galvanic sludges.

In this work the screening results of the scientific activity conducted on laboratory scale to valorise chromium(III) contained in the galvanic sludge as chromium precursor for ceramic pigments are reported. The valorisation of this waste as a secondary raw material (SRM) is obtained by achievement of thermal and chemical stable crystal structures able to color ceramic material. Two different pigments pink CaCr(0.04)Sn(0.97)SiO(5) and green Ca(3)Cr(2)(SiO(4))(3) were synthesized by solid-state reactions using dried Cr sludge as chromium oxide precursor. The obtained pigments were characterized by X-ray diffraction and SEM analysis. Furthermore the color developed in a suitable ceramic glaze was investigated in comparison with the color developed by the pigments prepared from pure Cr(2)O(3). The characterization carried out corroborates the thermal and chemical stability of the synthesized pigments and, especially for the Cr-Sn pink pigment, the powders develop an intense color that is very similar to the color developed by the pigments obtained starting from pure Cr(2)O(3).

Study of the vibrational spectrum of cuprorivaite.

In this research, after tracing a history of the pigment, the preparation and analysis of samples of Egyptian blue have been reported. The main reactions taking place during its preparation are indicated. X-ray diffractions show that, starting from mixtures of precursors with stoichiometric composition, the product is practically only cuprorivaite. The kind of flux and cristallinity of silica does not seem determining factors for the pigment formation. Infrared and Raman spectra and an assignment of the bands are reported. Impurities ascertained are discussed on the basis on the data available.