Anion stabilised hypercloso-hexaalane Al6H6.

Boron hydride clusters are an extremely diverse compound class, which are of enormous importance to many areas of chemistry. Despite this, stable aluminium hydride analogues of these species have remained staunchly elusive to synthetic chemists. Here, we report that reductions of an amidinato-aluminium(III) hydride complex with magnesium(I) dimers lead to unprecedented examples of stable aluminium(I) hydride complexes, [(ArNacnac)Mg]2[Al6H6(Fiso)2] (ArNacnac = [HC(MeCNAr)2]-, Ar = C6H2Me3-2,4,6 Mes; C6H3Et2-2,6 Dep or C6H3Me2-2,6 Xyl; Fiso = [HC(NDip)2]-, Dip = C6H3Pri2-2,6), which crystallographic and computational studies show to possess near neutral, octahedral hypercloso-hexaalane, Al6H6, cluster cores. The electronically delocalised skeletal bonding in these species is compared to that in the classical borane, [B6H6]2-. Thus, the chemistry of classical polyhedral boranes is extended to stable aluminium hydride clusters for the first time.

Normal and abnormal NHC coordination in cationic hydride iodide complexes of aluminium.

The mixed N-heterocyclic carbene (NHC) complexes NHCAlHxI3-x, where NHC is IDip or IMes ((HCNAr)2C:, Ar = 2,6-iPr2C6H3 = Dip (IDip); or 2,4,6-Me3C6H2 = Mes (IMes)), x = 1 or 2, were either prepared from NHCAlH3 and NHCAlI3 or by halogenation of NHCAlH3 with MeI. Reaction of [(IDip)AlHxI3-x], with x = 0-3, with another equivalent of IDip afforded either fluxional equilibria in benzene solution for x = 0, no reaction for x = 3, or the new mixed normal-abnormal NHC-coordinated ionic complexes [(IDip)AlH2(aIDip)]I (9) and [(IDip)AlHI(aIDip)]I (10), where aIDip is the abnormal IDip carbene tautomer bonded through its 4-position. The molecular structures of 9 and 10 were determined and show slightly shorter Al-C(aIDip) than Al-C(IDip) distances. In addition, a complex containing [(IDip)AlI2(aIDip)]I (11) was structurally characterized though could not intentionally be synthesised. Possible formation mechanisms for 9-11 are discussed and the normal and abnormal IDip coordination to the aluminium(iii) centre is believed to occur for steric reasons.

Iron and Cobalt Diazoalkane Complexes Supported by ß-Diketiminate Ligands: A Synthetic, Spectroscopic, and Computational Investigation.

Diazoalkanes are interesting redox-active ligands and also precursors to carbene fragments. We describe a systematic study of the binding and electronic structure of diphenyldiazomethane complexes of ß-diketiminate supported iron and cobalt, which span a range of formal d-electron counts of 7-9. In end-on diazoalkane complexes of formally monovalent three-coordinate transition metals, the electronic structures are best described as having the metal in the +2 oxidation state with an antiferromagnetically coupled radical anion diazoalkane as shown by crystallography, spectroscopy, and computations. A formally zerovalent cobalt complex has different structures depending on whether potassium binds; potassium binding gives transfer of two electrons into the η2-diazoalkane, but the removal of the potassium with crown ether leads to a form with only one electron transferred into an η1-diazoalkane. These results demonstrate the influence of potassium binding and metal oxidation state on the charge localization in the diazoalkane complexes. Interestingly, none of these reduced complexes yield carbene fragments, but the new cobalt(II) complex LtBuCoPF6 (LtBu = bulky ß-diketiminate) does catalyze the formation of an azine from its cognate diazoalkane, suggesting N2 loss and transient carbene formation.

Synthesis, Characterization, and Computational Analysis of the Dialanate Dianion, [H3 Al-AlH3 ]2- : A Valence Isoelectronic Analogue of Ethane.

The first example of a well-defined binary, low-oxidation-state aluminum hydride species that is stable at ambient temperature, namely the dianion in [{(Dep Nacnac)Mg}2 (µ-H)]2 [H3 Al-AlH3 ] (Dep Nacnac=[(DepNCMe)2 CH]- , Dep=2,6-diethylphenyl), has been prepared via a magnesium(I) reduction of the alanate complex, (Dep Nacnac)Mg(µ-H)3 AlH(NEt3 ). An X-ray crystallographic analysis has shown the compound to be a contact ion complex, which computational studies have revealed to be the source of the stability of the aluminum(II) dianion.

Activation of CO by Hydrogenated Magnesium(I) Dimers: Sterically Controlled Formation of Ethenediolate and Cyclopropanetriolate Complexes.

This study details the formal hydrogenation of two magnesium(I) dimers {(Nacnac)Mg}2 (Nacnac = [{(C6H3R2-2,6)NCMe}2CH](-); R = Pr(i) ((Dip)Nacnac), Et ((Dep)Nacnac)) using 1,3-cyclohexadiene. These reactions afford the magnesium(II) hydride complexes, {(Nacnac)Mg(µ-H)}2. Their reactions with excess CO are sterically controlled and lead cleanly to different C-C coupled products, viz. the ethenediolate complex, ((Dip)Nacnac)Mg{κ(1)-O-[((Dip)Nacnac)Mg(κ(2)-O,O-O2C2H2)]}, and the first cyclopropanetriolate complex of any metal, cis-{((Dep)Nacnac)Mg}3{µ-C3(H3)O3}. Computational studies imply the CO activation processes proceed via very similar mechanisms to those previously reported for related reactions involving f-block metal hydride compounds. This work highlights the potential magnesium compounds hold for use in the "Fischer-Tropsch-like" transformation of CO/H2 mixtures to value added oxygenate products.

Cobalt(II) Complex of a Diazoalkane Radical Anion.

ß-Diketiminate cobalt(I) precursors react with diphenyldiazomethane to give a compound that is shown by computational studies to be a diazoalkane radical anion antiferromagnetically coupled to a high-spin cobalt(II) ion. Thermolysis of this complex results in formal N-N cleavage to give a cobalt(II) ketimide complex. Experimental evaluation of the potential steps in the mechanism suggests that free azine is a likely intermediate in this reaction.

Preparation, characterization, and theoretical analysis of group 14 element(I) dimers: a case study of magnesium(I) compounds as reducing agents in inorganic synthesis.

A synthetic route to the new amidine (DipNH)(DipN)C(C(6)H(4)Bu(t)-4) (ButisoH; Dip = C(6)H(3)Pr(i)(2)-2,6) has been developed. Its deprotonation with either LiBu(n) or KN(SiMe(3))(2) yields the amidinate complexes [M(Butiso)] (M = Li or K). Their reactions with group 14 element halides/pseudohalides afford the heteroleptic group 14 complexes [(Butiso)SiCl(3)], [(Butiso)ECl] (E = Ge or Sn), and [{(Butiso)Pb(µ-O(3)SCF(3))(THF)}(∞)], all of which have been crystallographically characterized. In addition, the synthesis and spectroscopic characterization of the homoleptic complex [Pb(Butiso)(2)] is reported. Reductions of the heteroleptic complexes with a soluble magnesium(I) dimer, [{((Mes)Nacnac)Mg}(2)] ((Mes)Nacnac = [(MesNCMe)(2)CH](-); Mes = mesityl), have given moderate-to-high yields of the group 14 element(I) dimers [{(Butiso)E}(2)] (E = Si, Ge, or Sn), the X-ray crystallographic studies of which reveal trans-bent structures. The corresponding lead(I) complex could not be prepared. Comprehensive spectroscopic and theoretical analyses of [{(Butiso)E}(2)] have allowed their properties to be compared. All complexes possess E-E single bonds and can be considered as intramolecularly base-stabilized examples of ditetrelynes, REER. Taken as a whole, this study highlights the synthetic utility of soluble and easy to prepare magnesium(I) dimers as valuable alternatives to the harsh, and often insoluble, alkali-metal reducing agents that are currently widely employed in the synthesis of low-oxidation-state organometallic/inorganic complexes.

Synthesis of a stable adduct of dialane(4) (Al2H4) via hydrogenation of a magnesium(I) dimer.

The desorption of dihydrogen from magnesium(II) hydride, MgH2 (containing 7.6 wt% H), is reversible. MgH2 therefore holds promise as a hydrogen storage material in devices powered by fuel cells. We believed that dimeric magnesium(I) dimers (LMgMgL, L=ß-diketiminate) could find use as soluble models to aid the study of the mechanisms and/or kinetics of the hydrogenation of magnesium and its alloys. Here, we show that LMgMgL can be readily hydrogenated to yield LMg(µ-H)2MgL by treatment with aluminium(III) hydride complexes. In one case, hydrogenation was reversed by treating LMg(µ-H)2MgL with potassium metal. The hydrogenation by-products are the first thermally stable, neutral aluminium(II) hydride complexes to be produced, one of which, [{(IPr)(H)2Al}2] (IPr=:C[{(C6H3-i-Pr(2)-2,6)NCH}2]), is an N-heterocyclic carbene adduct of the elusive parent dialane4 (Al2H4). A computational analysis of this compound is presented.

Beta-diketiminate-stabilized magnesium(I) dimers and magnesium(II) hydride complexes: synthesis, characterization, adduct formation, and reactivity studies.

The preparation and characterization of a series of magnesium(II) iodide complexes incorporating beta-diketiminate ligands of varying steric bulk and denticity, namely, [(ArNCMe)(2)CH](-) (Ar=phenyl, ((Ph)Nacnac), mesityl ((Mes)Nacnac), or 2,6-diisopropylphenyl (Dipp, (Dipp)Nacnac)), [(DippNCtBu)(2)CH](-) ((tBu)Nacnac), and [(DippNCMe)(Me(2)NCH(2)CH(2)NCMe)CH](-) ((Dmeda)Nacnac) are reported. The complexes [((Ph)Nacnac)MgI(OEt(2))], [((Mes)Nacnac)MgI(OEt(2))], [((Dmeda)Nacnac)MgI(OEt(2))], [((Mes)Nacnac)MgI(thf)], [((Dipp)Nacnac)MgI(thf)], [((tBu)Nacnac)MgI], and [((tBu)Nacnac)MgI(DMAP)] (DMAP=4-dimethylaminopyridine) were shown to be monomeric by X-ray crystallography. In addition, the related beta-diketiminato beryllium and calcium iodide complexes, [((Mes)Nacnac)BeI] and [{((Dipp)Nacnac)CaI(OEt(2))}(2)] were prepared and crystallographically characterized. The reductions of all metal(II) iodide complexes by using various reagents were attempted. In two cases these reactions led to the magnesium(I) dimers, [((Mes)Nacnac)MgMg((Mes)Nacnac)] and [((tBu)Nacnac)MgMg((tBu)Nacnac)]. The reduction of a 1:1 mixture of [((Dipp)Nacnac)MgI(OEt(2))] and [((Mes)Nacnac)MgI(OEt(2))] with potassium gave a low yield of the crystallographically characterized complex [((Dipp)Nacnac)Mg(mu-H)(mu-I)Mg((Mes)Nacnac)]. All attempts to form beryllium(I) or calcium(I) dimers by reductions of [((Mes)Nacnac)BeI], [{((Dipp)Nacnac)CaI(OEt(2))}(2)], or [{((tBu)Nacnac)CaI(thf)}(2)] have so far been unsuccessful. The further reactivity of the magnesium(I) complexes [((Mes)Nacnac)MgMg((Mes)Nacnac)] and [((tBu)Nacnac)MgMg((tBu)Nacnac)] towards a variety of Lewis bases and unsaturated organic substrates was explored. These studies led to the complexes [((Mes)Nacnac)Mg(L)Mg(L)((Mes)Nacnac)] (L=THF or DMAP), [((Mes)Nacnac)Mg(mu-AdN(6)Ad)Mg((Mes)Nacnac)] (Ad=1-adamantyl), [((tBu)Nacnac)Mg(mu-AdN(6)Ad)Mg((tBu)Nacnac)], and [((Mes)Nacnac)Mg(mu-tBu(2)N(2)C(2)O(2))Mg((Mes)Nacnac)] and revealed that, in general, the reactivity of the magnesium(I) dimers is inversely proportional to their steric bulk. The preparation and characterization of [((tBu)Nacnac)Mg(mu-H)(2)Mg((tBu)Nacnac)] has shown the compound to have different structural and physical properties to [((tBu)Nacnac)MgMg((tBu)Nacnac)]. Treatment of the former with DMAP has given [((tBu)Nacnac)Mg(H)(DMAP)], the X-ray crystal structure of which disclosed it to be the first structurally authenticated terminal magnesium hydride complex. Although attempts to prepare [((Mes)Nacnac)Mg(mu-H)(2)Mg((Mes)Nacnac)] were not successful, a neutron diffraction study of the corresponding magnesium(I) complex, [((Mes)Nacnac)MgMg((Mes)Nacnac)] confirmed that the compound is devoid of hydride ligands.

A dimeric magnesium(I) compound as a facile two-center/two-electron reductant.

The odd couple: A dimeric magnesium(I) complex acts as a facile and selective two-center/two-electron reductant towards a series of unsaturated substrates (see scheme; Ar = 2,6-iPr(2)C(6)H(3), Ad = 1-adamantyl). The novel reduced or reductively coupled products obtained from these reductions suggest that magnesium(I) compounds may find wide use in organic and organometallic syntheses.