Matrix-assisted laser desorption/ionization Fourier transform mass spectrometric analysis of oxygenated triglycerides and phosphatidylcholines in egg tempera paint dosimeters used for environmental monitoring of museum display conditions.

Oxidative changes in triacylglycerols and diacylphosphatidylcholines in egg tempera paint strips are used for chemical dosimetry of the quality of the museum environment. High-resolution matrix-assisted laser desorption/ionization Fourier transform mass spectrometry (MALDI-FTMS) was used as a rapid method for the determination of the exact elemental composition of the alteration products from diacylphosphatidylcholines and triacylglycerols. Light exposure of the egg tempera paints yields oxygenated diacylphosphatidylcholines and triacylglycerols. In the latter multiple incorporation of oxygen was observed as a recurring mass difference of 15.995, the exact atomic mass of oxygen. Owing to the high resolution of the FTMS data (routinely 20 000 at m/z 1000 in broadband mode), oxidation products with different elemental compositions but identical nominal mass could be distinguished. Products of oxidative cleavage of triacylglycerols were observed in samples exposed for longer times. The relative intensities of the peaks of singly and multiply oxygenated triacylglycerols were used to derive the degree of oxygenation of the egg lipids in the tempera paint dosimeters. The degree of oxygenation was found to be directly related to the light exposure time. Exposure to elevated temperature (60 degrees C) for a period of 21 days did not lead to oxygenation of the triacylglycerols and diacylphosphatidylcholines. Exposure to NO(x) and SO(2) in the dark greatly increased the degree of oxygenation. Addition of lead- or copper-containing pigments to the egg binding medium (and subsequent storage for 6 months in the dark) led to accelerated conversion of egg lipids to oxidised products.

Tissue-specific patterns of lignification are disturbed in the brown midrib2 mutant of maize (Zea mays L.).

Despite recent progress, several aspects of lignin biosynthesis, including variation in lignin composition between species and between tissues within a given species, are still poorly understood. The analysis of mutants affected in cell wall biosynthesis may help increase the understanding of these processes. We have analyzed the maize brown midrib2 (bm2) mutant, one of the four bm mutants of maize, using pyrolysis-mass spectrometry (Py-MS) and pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS). Vascular tissues from the leaf blade and leaf sheath from different parts of the plant were investigated and compared to the corresponding samples from a wild-type plant of the same genetic background (inbred line A619). Multivariate analysis revealed that the bm2 mutant had reduced amounts of di- and trimeric lignin derivatives, notably species with m/z 272 and m/z 330, and that the ratio of guaiacyl residues to polysaccharides was reduced in the bm2 mutant. In addition, differences in cell wall composition between different parts of the plant (blade versus sheath, young versus old tissue) were much less pronounced in the bm2 mutant. These changes suggest that the functional Bm2 gene is important for the establishment of tissue-specific cell wall composition.

Accumulation and turnover of 2-tridecanone in Tetranychus urticae and its consequences for resistance of wild and cultivated tomatoes.

In this study we assessed the dynamic changes of 2-tridecanone in a herbivorous mite (Tetranychus urticae) on tomato (Lycopersicon esculentum, cv. 'Moneymaker'), a plant with methyl ketones in the tetracellular tips of the glandular trichomes (Type VI). We showed that spider mites accumulate 2-tridecanone when foraging on cultivated tomato. Thus, the rate of mite-trichome contact multiplied by the amount of toxin per trichome tip exceeded the relative rate of toxin turnover multiplied by the amount of toxin per mite. The relative rate of toxin turnover was estimated to be 1.1 per day on cucumber, a plant without this toxin. The amount per trichome tip varied from 0.33 ng for middle-leaf trichomes to 1.26 ng for main-stem trichomes. Hence, to achieve a static level of 2-tridecanone equal to 8-17 ng per mite--representing the level we found in mites on middle leaves--the rate of mite-trichome contact should be 26-57 per day. Because methyl ketone apparently accumulates in the spider mites on tomato, the rate of mite-trichome contact is probably higher than that. We expect the accumulation of ketones to occur especially on the stems of cultivated tomato, since this is the area most densely occupied with glandular hairs and because here the hairs have higher levels of the methyl ketones. Using dose-response relationships assessed earlier (Chatzivasileiadis and Sabelis, 1997, 1998), we estimated that the number of mite-trichome contacts causing 50% mortality per day is equal to 88 on a tomato stem, whereas it equals 70 for another strain of spider mites collected from cucumber. On wild tomato, L. hirsutum f. glabratum (PI 134417), just one to two contacts would suffice to cause 50% mortality per day. We suggest that methyl ketones from glandular hairs on tomato are an important mortality factor for spider mites on wild tomato and probably also on cultivated tomato.

Determination of Block Length Distributions of Poly(oxypropylene) and Poly(oxyethylene) Block Copolymers by MALDI-FTICR Mass Spectrometry.

Matrix-assisted laser desorption/ionization (MALDI) was performed on an external ion source Fourier transform ion cyclotron resonance mass spectrometer (FTICR-MS) to analyze the block length distributions of triblock polymers of poly(oxypropylene) and poly(oxyethylene). The first series of results presented demonstrate that the apparent molecular weight distributions are distorted. This distortion is induced by the flight-time-induced mass discrimination inherent in the experimental technique, the variation of isotopic patterns over the measured mass range, and the overlap of peaks in the spectrum. Subsequently, a method for the treatment of molecular weight distributions measured by MALDI on an external ion source FTICR-MS is developed to yield the actual molecular weight distribution and, from that, the individual block length distributions. For the first time, detailed and accurate molecular weight data were obtained on a complex sample using this methodology, which independently validates the data provided by the manufacturer. The experimentally verified random coupling hypothesis proves the validity of the methodology.

Identification of an original non-terpenoid varnish from the early 20th century oil painting "the white horse" (1929), by h. Menzel.

Different mass spectrometric approaches were used to identify an original non-terpenoid varnish. Direct temperature-resolved MS and pyrolysis-GC/MS mainly showed the phenolic components, whereas thermally assisted (trans)methylation with tetramethylammonium hydroxide (TMAH) strongly enhanced the evidence for tung oil as part of the varnish. Transethylation studies of the fatty acids confirmed the TMAH data. The degree of hydrolysis of the oil network was found to be low. No evidence was found for a direct link between the drying oil and phenolic resin. On the basis of the MS information, the aged varnish is identified as an open-structure tert-butylphenol-formaldehyde resin which entangles the tung oil polymer.

High resolution end group determination of low molecular weight polymers by matrix-assisted laser desorption ionization on an external ion source fourier transform ion cyclotron resonance mass spectrometer.

Matrix-assisted laser desorption ionization was performed on an external ion source Fourier transform ion cyclotron resonance mass spectrometer equipped with a 7-T superconducting magnet to analyze end groups of synthetic polymers in the mass range from 500 to 5000 u. Native, perdeutero methylated, propylated, and acetylated polyethylene glycol and polyvinyl pyrrolidone with unknown end-group elemental composition were investigated in the mass range up to 5000 u by using a 2,5-dihydroxybenzoic acid matrix. A small electrospray setup was used for the deposition of the samples. Two methods to process data were evaluated for the determination of end groups from the measured masses of the component molecules in the molecular weight ranges: a regression method and an averaging method. The averaging method is demonstrated to allow end-group mass determinations with an accuracy within 3 mu for the molecular weight range from 500 to 1400 and within 20 mu for the molecular weight range from 3400 to 5000. This is sufficient to identify the elemental composition of end groups in unknown polymer samples.

Analytical pyrolysis experiments of Titan aerosol analogues in preparation for the Cassini Huygens mission.

Comparative pyrolysis mass spectrometric data of Titan aerosol analogues, called "tholins", are presented. The Titan tholins were produced in the laboratory at Cornell by irradiation of simulated Titan atmospheres with high energy electrons in plasma discharge. Mass-spectrometry measurements were performed at FOM of the solid phase of various tholins by Curie-point pyrolysis Gas-Chromatography/Mass-Spectrometry (GCMS) and by temperature resolved in source Pyrolysis Mass-Spectrometry to reveal the composition and evolution temperature of the dissociation products. The results presented here are used to further define the ACP (Aerosol Collector Pyrolyser)-GCMS experiment and provide a basis for modelling of aerosol composition on Titan and for the interpretation of Titan atmosphere data from the Huygens probe in the future.

Endgroup analysis of polyethylene glycol polymers by matrix-assisted laser desorption/ionization Fourier-transform ion cyclotron resonance mass spectrometry.

Fourier-transform ion cyclotron resonance mass spectrometry (FTICR-MS) by external injection of matrix-assisted laser desorbed and ionized (MALDI) polymers offers good possibilities for characterization of low molecular weight homopolymers (MW range up to 10 kDa). The molecular masses of the molecular weight distribution (MWD) components of underivatized and derivatized (dimethyl, dipropyl, dibutyl and diacetyl) polyethylene glycol (PEG) 1000 and 4000 were measured by MALDI-FTICR-MS. These measurements have been performed using a commercial FTICR spectrometer with a home-built external ion source. MALDI of the samples with a 2,5-dihydroxybenzoic acid matrix in a 1000:1 matrix-to-analyte molar ratio produces sodiated molecules in a sufficient yield to trap the ions in the ICR cell. The masses of the molecular weight distribution of PEG components were measured in broad-band mode with a mass accuracy of < 5 ppm in the mass range around 1000 u and within 40 ppm accuracy around 4000 u. From these measurements, the endgroup mass of the polymer was determined by correlation of the measured component mass with the degree of polymerization. The masses of the PEG endgroups have been determined within a deviation of 3-10 millimass units for the PEG1000 derivatives and 10-100 millimass units for the PEG4000 derivatives, thus confirming the identity of the distal parts of the model compounds.

Structural biopolymer preservation in Miocene leaf fossils from the Clarkia site, northern Idaho.

The 17- to 20-million-year-old locality at Clarkia, northern Idaho, is renowned for yielding amplifiable DNA from a magnolia leaf fossil. In-source pyrolysis-mass spectrometry and pyrolysis-gas chromatography/mass spectrometry now reveal that molecular preservation of biomacromolecules is highly selective; structural polysaccharides, cutin polyesters, and proteins were not preserved in detectable quantity in the leaf tissues, whereas both lignin and an aliphatic biopolymer were detected. This study points up the need for improved understanding of the precise modes and extent of preservation of biomacromolecules in fossil materials and sediments.

Apple-fruit xyloglucans: a comparative study of enzyme digests of whole cell walls and of alkali-extracted xyloglucans.

Apple cell walls or alkali-extracted xyloglucans were digested with an endo-glucanase from Trichoderma viride and the resulting oligosaccharides were isolated by chromatography on Bio-Gel P-4. Three main oligosaccharides were present in similar proportions, and their structures were shown to be [Xyl(Glc)]3-Glc, [Xyl(Glc)]2-(FucGalXyl)Glc-Glc, and XylGlc-(GalXyP)Glc-(FucGalXyl)Glc-Glc. Each non-reducing-end Glc was 6-linked, each reducing-end Glc was 4-substituted, and each other Glc was 4,6-disubstituted. The Xyl was either terminal or 2-substituted, the Fuc was terminal, and the Gal was either terminal or 2-substituted. The 1H-NMR spectra of the oligosaccharides extracted directly from the cell wall showed that they are not acetylated. Other oligosaccharides, notably GalXyl3Glc4, Xyl2Glc4, and Xyl2Glc3, were present in smaller proportions in the digest of the cell walls.

Characterisation of polysaccharides by in-source pyrolysis positive- and negative-ion direct chemical ionisation-mass spectrometry.

Series of oligosaccharide ions have been generated from a range of polysaccharides by the application of in-source pyrolysis mass spectrometry, using both ammonia positive-ion chemical ionisation and negative-ion chlorine-nucleophilic-addition ionisation. Glucans with alpha-(1----6), beta-(1----6), alpha-(1----4), beta-(1----4), beta-(1----3), and beta-(1----2) linkages were studied, together with pentosans, xyloglucans, and an arabinogalactan. The series of ions correspond to intact, desorbed oligosaccharides with a terminal anhydro-sugar unit, and to similar oligosaccharides with attached sugar ring-cleavage fragments. The ions generated are dependent on the position of the linkage and ring size, and retain significant information on the structure of the original polysaccharide.

Involvement of cinnamyl-alcohol dehydrogenase in the control of lignin formation in Sorghum bicolor L. Moench.

The lignin structure and enzyme activities of normal and brown-midrib (BMR-6) mutant lines of Sorghum bicolor have been compared to identify the enzyme(s) involved in the reduction of the lignin content of the mutant. The results indicate that cinnamyl-alcohol dehydrogenase (CAD) and caffeic acid O-methyltransferase are depressed in the BMR-6 line, whereas the structural modifications correspond only to a reduction of CAD activity. Apparently, the change in the Sorghum lignin content, caused by depression of CAD activity, is accompanied by the incorporation of cinnamaldehydes into the core lignin.

p-Coumaric acid - a monomer in the sporopollenin skeleton.

Sporopollenin obtained from wings of Pinus mugo (Turra) pollen was analysed by pyrolysis mass spectrometry. In the spectrum, mass peaks which are characteristic for p-coumaric acid were dominant. p-Coumaric acid was the main degradation compound when the wing material was treated by a gentle method using AII3, and also when the remaining residue of the treated sporopollenin material was saponified. It is therefore assumed that p-coumaric acid is a genuine structural unit in the sporopollenin skeleton. In addition, the effects of AII3 treatment indicate that the p-coumaric acid might be bound by ether linkages.

Significance and taxonomic value of iso and anteiso monoenoic fatty acids and branded beta-hydroxy acids in Desulfovibrio desulfuricans.

The fatty acids obtained from extractable lipids of the anaerobic sulfate bacterium Desulfovibrio desulfuricans were identified. Saturated and monoenoic iso (C15-C19) and anteiso (C15, C17) fatty acids and saturated normal (C14-C18) and monoenoic normal (C16, C18) fatty acids were shown to be shown to be present by capillary gas chromatography-mass spectrometry. Iso and anteiso beta-hydroxy fatty acids were analyzed as trimethylsilyl ethers in the same way. The position of methyl branches in the monoenoic fatty acids was determined from characteristic fragment ions in the mass spectra of their methyl esters. Disilyloxy methyl esters, prepared by derivatization of the mono unsaturated methyl esters and analyzed by capillary gas chromatography-mass spectrometry, provided the position of double bonds. The monoenoic fatty acids identified in this way were normal (delta7-C16:1, delta9-C16:1, delta9-C18:1, delta11-C18:1), iso (delta7-C15:1, delta9-C16:1, delta9-C17:1, delta11-C18:1, delta11-C19:1), and anteiso (delta7-C15:1, delta9-C17:1). Iso delta9-C17:1 fatty acid is present as the major component. The occurrence of these monoenoic fatty acids in this bacterium is of taxonomical importance.