Serial block-face imaging and its potential for reconstructing diminutive cell systems: a case study from arthropods.

Until recently, three-dimensional reconstruction on an ultrastructural level was only possible using serial section transmission electron microscopy (ssTEM). However, ssTEM is highly challenging and prone to artifacts as, e.g., section loss and image distortions. New methods, such as serial block-face scanning electron microscopy (SBFSEM) overcome these limitations and promise a high lateral resolution. However, little is known about the usability of SBFSEM in diminutive, but highly complex cellular systems. We used spider sperm (~3 µm in diameter), which fulfills these conditions, to analyze the potential of SBFSEM compared with ssTEM. Our data suggest that the resolution obtained by SBFSEM allows depicting structures on a cellular level and is sufficient to discriminate subcellular components, but is highly dependent on previous staining procedures and electron density of the target structures.

Electron counting and beam-induced motion correction enable near-atomic-resolution single-particle cryo-EM.

In recent work with large high-symmetry viruses, single-particle electron cryomicroscopy (cryo-EM) has achieved the determination of near-atomic-resolution structures by allowing direct fitting of atomic models into experimental density maps. However, achieving this goal with smaller particles of lower symmetry remains challenging. Using a newly developed single electron-counting detector, we confirmed that electron beam-induced motion substantially degrades resolution, and we showed that the combination of rapid readout and nearly noiseless electron counting allow image blurring to be corrected to subpixel accuracy, restoring intrinsic image information to high resolution (Thon rings visible to ∼3 Å). Using this approach, we determined a 3.3-Å-resolution structure of an ∼700-kDa protein with D7 symmetry, the Thermoplasma acidophilum 20S proteasome, showing clear side-chain density. Our method greatly enhances image quality and data acquisition efficiency-key bottlenecks in applying near-atomic-resolution cryo-EM to a broad range of protein samples.

Four-dimensional STEM-EELS: enabling nano-scale chemical tomography.

Advances in electron-based instrumentation have enabled the acquisition of multidimensional data sets for exploring the unique structure-property relationship of nanomaterials. In this manuscript, we report a technique for directly probing and analyzing the three-dimensional (3D) electronic structure of a material at the nano-scale. This technique, referred to here as 4D STEM-EELS, utilizes a rotation holder and pillar-shaped samples to allow STEM mode high-angle annular dark-field (HAADF) and EELS spectrum images to be recorded over a complete 180 degrees rotation to minimize artifacts. The end result is a four-dimensional data set, containing two spatial dimensions, rotation angle and energy-loss information I(x, y, theta, DeltaE), which can then be processed to extract any EELS signal as a rotation or "tilt-series" map. If the extracted properties satisfy the linear projection criteria, these maps can then be used for tomographic reconstruction to yield volumetric maps of the corresponding properties. Hence by combining STEM HAADF and energy-loss information from such a series of spectrum images, it is possible to map not only the microstructure, but also the elemental, physical and chemical state information of a material in three dimensions. Two examples are reported here to demonstrate the potential of this technique. To illustrate chemical tomography, 4D STEM-EELS was used to directly probe the 3D electronic structure of a W-to-Si contact from a semiconductor device. Core-loss data were used to reconstruct and render the composition of the W-to-Si contact in three dimensions. The fine structure of the 99eV Si edge was analyzed with MLLS fitting to map the variations in Si bonding in 3D. To illustrate the direct probing of intrinsic material anisotropy, 4D STEM-EELS was used to probe a ZnO thin film. Subtle but systematic changes in low-loss structure were observed as a function of electron-beam orientation with respect to the ZnO crystallographic axes. Together these examples illustrate how the 4D STEM-EELS technique reported here can be used to probe the elemental, physical and chemical state information of a material in three dimensions and extend our knowledge of nano-scale structures.

JADAS: a customizable automated data acquisition system and its application to ice-embedded single particles.

The JEOL Automated Data Acquisition System (JADAS) is a software system built for the latest generation of the JEOL Transmission Electron Microscopes. It is designed to partially or fully automate image acquisition for ice-embedded single particles under low dose conditions. Its built-in flexibility permits users to customize the order of various imaging operations. In this paper, we describe how JADAS is used to accurately locate and image suitable specimen areas on a grid of ice-embedded particles. We also demonstrate the utility of JADAS by imaging the epsilon 15 bacteriophage with the JEM3200FSC electron cryo-microscope, showing that sufficient images can be collected in a single 8h session to yield a subnanometer resolution structure which agrees with the previously determined structure.

Mechanism of lid closure in the eukaryotic chaperonin TRiC/CCT.

All chaperonins mediate ATP-dependent polypeptide folding by confining substrates within a central chamber. Intriguingly, the eukaryotic chaperonin TRiC (also called CCT) uses a built-in lid to close the chamber, whereas prokaryotic chaperonins use a detachable lid. Here we determine the mechanism of lid closure in TRiC using single-particle cryo-EM and comparative protein modeling. Comparison of TRiC in its open, nucleotide-free, and closed, nucleotide-induced states reveals that the interdomain motions leading to lid closure in TRiC are radically different from those of prokaryotic chaperonins, despite their overall structural similarity. We propose that domain movements in TRiC are coordinated through unique interdomain contacts within each subunit and, further, these contacts are absent in prokaryotic chaperonins. Our findings show how different mechanical switches can evolve from a common structural framework through modification of allosteric networks.

Methods for aligning and for averaging 3D volumes with missing data.

The visibility and resolution of a tomographic reconstruction containing multiple copies of discrete particles can be enhanced by averaging subtomograms after they are corrected aligned. However, the "missing wedge" in electron tomography can easily lead to erroneous alignment. We have explored a Fourier space cross-correlation method with a proper weighting scheme to align and average different sets of volumetric data, each of which has different missing data due to the limited specimen tilts. This approach depends neither on a preexisting template, nor an exact knowledge of the geometry, orientation, or amount of the missing data. This paper introduces a procedure where the missing data might be gradually "filled in" by consecutively aligning and averaging volumes with different orientations of their missing data. We have validated these techniques by a set of simulated data with various symmetries and extent of missing data. We have also successfully applied these procedures to experimental cryo-electron tomographic data [Chang, J.T., Schmid, M.F., Rixon, F.J., and Chiu, W., 2007. Electron cryotomography reveals the portal in the herpesvirus capsid. J. Virol. 81, 2065-2068; Schmid, M.F., Paredes, A.M., Khant, H.A., Soyer, F., Aldrich, H.C., Chiu, W., and Shively, J.M., 2006. Structure of Halothiobacillus neapolitanus carboxysomes by cryo-electron tomography. J. Mol. Biol. 364, 526-535].

Modular software platform for low-dose electron microscopy and tomography.

Transmission electron microscopy imaging protocols required by structural scientists vary widely and can be laborious without tailor-made applications. We present here the jeol automated microscopy expert system (james) api integrator, a programming library for computer control of transmission electron microscopy operations and equipment. james has been implemented on JEOL microscopes with Gatan CCDs but is designed to be modular so it can be adapted to run on different microscopes and detectors. We have used the james api integrator to develop two applications for low-dose digital imaging: james imaging application and the mr t tomographic imaging application. Both applications have been widely used within our NCRR-supported Center for routine data collection and are now made available for public download.

Essential function of the built-in lid in the allosteric regulation of eukaryotic and archaeal chaperonins.

Chaperonins are allosteric double-ring ATPases that mediate cellular protein folding. ATP binding and hydrolysis control opening and closing of the central chaperonin chamber, which transiently provides a protected environment for protein folding. During evolution, two strategies to close the chaperonin chamber have emerged. Archaeal and eukaryotic group II chaperonins contain a built-in lid, whereas bacterial chaperonins use a ring-shaped cofactor as a detachable lid. Here we show that the built-in lid is an allosteric regulator of group II chaperonins, which helps synchronize the subunits within one ring and, to our surprise, also influences inter-ring communication. The lid is dispensable for substrate binding and ATP hydrolysis, but is required for productive substrate folding. These regulatory functions of the lid may serve to allow the symmetrical chaperonins to function as 'two-stroke' motors and may also provide a timer for substrate encapsulation within the closed chamber.

Assessing the capabilities of a 4kx4k CCD camera for electron cryo-microscopy at 300kV.

CCD cameras have numerous advantages over photographic film for detecting electrons; however the point spread function of these cameras has not been sufficient for single particle data collection to subnanometer resolution with 300kV microscopes. We have adopted spectral signal to noise ratio (SNR) as a parameter for assessing detector quality for single particle imaging. The robustness of this parameter is confirmed under a variety of experimental conditions. Using this parameter, we demonstrate that the SNR of images of either amorphous carbon film or ice embedded virus particles collected on a new commercially available 4kx4k CCD camera are slightly better than photographic film at low spatial frequency (<1/5 Nyquist frequency), and as good as photographic film out to half of the Nyquist frequency. In addition it is slightly easier to visualize ice embedded particles on this CCD camera than on photographic film. Based on this analysis it is realistic to collect images containing subnanometer resolution data (6-9A) using this CCD camera at an effective magnification of approximately 112000x on a 300kV electron microscope.

Structural analysis of the anaphase-promoting complex reveals multiple active sites and insights into polyubiquitylation.

The anaphase-promoting complex/cyclosome (APC/C) is an E3 ubiquitin ligase composed of approximately 13 distinct subunits required for progression through meiosis, mitosis, and the G1 phase of the cell cycle. Despite its central role in these processes, information concerning its composition and structure is limited. Here, we determined the structure of yeast APC/C by cryo-electron microscopy (cryo-EM). Docking of tetratricopeptide repeat (TPR)-containing subunits indicates that they likely form a scaffold-like outer shell, mediating assembly of the complex and providing potential binding sites for regulators and substrates. Quantitative determination of subunit stoichiometry indicates multiple copies of specific subunits, consistent with a total APC/C mass of approximately 1.7 MDa. Moreover, yeast APC/C forms both monomeric and dimeric species. Dimeric APC/C is a more active E3 ligase than the monomer, with greatly enhanced processivity. Our data suggest that multimerisation and/or the presence of multiple active sites facilitates the APC/C's ability to elongate polyubiquitin chains.

A structure of the human apoptosome at 12.8 A resolution provides insights into this cell death platform.

Apaf-1 and cytochrome c coassemble in the presence of dATP to form the apoptosome. We have determined a structure of the apoptosome at 12.8 A resolution by using electron cryomicroscopy and single-particle methods. We then docked appropriate crystal structures into the map to create an accurate domain model. Thus, we found that seven caspase recruitment domains (CARDs) form a central ring within the apoptosome. At a larger radius, seven copies of the nucleotide binding and oligomerization domain (NOD) associate laterally to form the hub, which encircles the CARD ring. Finally, an arm-like helical domain (HD2) links each NOD to a pair of beta propellers, which bind a single cytochrome c. This model provides insights into the roles of dATP and cytochrome c in assembly. Our structure also reveals how a CARD ring and the central hub combine to create a platform for procaspase-9 activation.

A 9 angstroms single particle reconstruction from CCD captured images on a 200 kV electron cryomicroscope.

Sub-nanometer resolution structure determination is becoming a common practice in electron cryomicroscopy of macromolecular assemblies. The data for these studies have until now been collected on photographic film. Using cytoplasmic polyhedrosis virus (CPV), a previously determined structure, as a test specimen, we show the feasibility of obtaining a 9 angstroms structure from images acquired from a 4 k x 4 k Gatan CCD on a 200 kV electron cryomicroscope. The match of the alpha-helices in the protein components of the CPV with the previous structure of the same virus validates the suitability of this type of camera as the recording media targeted for single particle reconstructions at sub-nanometer resolution.