Dual functional quaternary chitosans with thermoresponsive behavior: structure-activity relationships in antibacterial activity and biocompatibility.

Cationically modified chitosan derivatives exhibit a range of appealing characteristics, with a particular emphasis on their antimicrobial potential across a broad spectrum of biomedical applications. This study aimed to delve deeper into quaternary chitosan (QC) derivatives. Through the synthesis of both homogeneously and heterogeneously dual-quaternized chitosan (DQC), utilizing AETMAC ([2-(acryloyloxy)ethyl]-trimethylammonium chloride) and GTMAC (glycidyl trimethylammonium chloride), a permanent charge was established, spanning a wide pH range. We assessed structural differences, the type of quaternary functional group, molecular weight (Mw), and charge density. Intriguingly, an upper critical solution temperature (UCST) behavior was observed in AETMAC-functionalized QC. To our knowledge, it is a novel discovery in cationically functionalized chitosan. These materials demonstrated excellent antimicrobial efficacy against model test organisms E. coli and P. syringae. Furthermore, we detected concentration-dependent cytotoxicity in NIH-3T3 fibroblasts. Striking a balance between antimicrobial activity and cytotoxicity becomes a crucial factor in application feasibility. AETMAC-functionalized chitosan emerges as the top performer in terms of overall antibacterial effectiveness, possibly owing to factors like molecular weight, charge characteristics, and variations in the quaternary linker. Quaternary chitosan derivatives, with their excellent antibacterial attributes, hold significant promise as antibacterial or sanitizing agents, as well as across a broad spectrum of biomedical and environmental contexts.

Biocompatibility of graphene oxide nanosheets functionalized with various amino acids towards mesenchymal stem cells.

Graphene and its derivatives have gained popularity due to their numerous applications in various fields, such as biomedicine. Recent reports have revealed the severe toxic effects of these nanomaterials on cells and organs. In general, the chemical composition and surface chemistry of nanomaterials affect their biocompatibility. Therefore, the purpose of the present study was to evaluate the cytotoxicity and genotoxicity of graphene oxide (GO) synthesized by Hummer's method and functionalized by different amino acids such as lysine, methionine, aspartate, and tyrosine. The obtained nanosheets were identified by FT-IR, EDX, RAMAN, FE-SEM, and DLS techniques. In addition, trypan blue and Alamar blue methods were used to assess the cytotoxicity of mesenchymal stem cells extracted from human embryonic umbilical cord Wharton jelly (WJ-MSCs). The annexin V staining procedure was used to determine apoptotic and necrotic death. In addition, COMET and karyotyping techniques were used to assess the extent of DNA and chromosome damage. The results of the cytotoxicity assay showed that amino acid modifications significantly reduced the concentration-dependent cytotoxicity of GO to varying degrees. The GO modified with aspartic acid had the lowest cytotoxicity. There was no evidence of chromosomal damage in the karyotyping method, but in the comet assay, the samples modified with tyrosine and lysine showed the greatest DNA damage and rate of apoptosis. Overall, the aspartic acid-modified GO caused the least cellular and genetic damage to WJ-MSCs, implying its superior biomedical applications such as cell therapy and tissue engineering over GO.

Dendritic hybrid materials comprising polyhedral oligomeric silsesquioxane (POSS) and hyperbranched polyglycerol for effective antifungal drug delivery and therapy in systemic candidiasis.

Systemic Candida infections are routinely treated with amphotericin B (AMB), a highly effective antimycotic drug. However, due to severe toxicities linked to the parenteral administration of conventional micellar formulations (Fungizone®), its clinical utility is limited. Hyperbranched polyglycerols (HPGs) are multi-branched three-dimensional hydrophilic macromolecules that can be used to lessen the toxicity of AMB while also increasing its aqueous solubility. In the current research, to improve the safety and therapeutic efficacy of AMB, we developed new polyhedral oligomeric silsesquioxane - hyperbranched polyglycerol dendrimers with cholesterol termini (POSS-HPG@Chol) using azide-alkyne click reaction. Compared with Fungizone®, the as-synthesized POSS-HPG@Chol/AMB had lower minimum inhibitory and fungicidal concentrations against almost all studied Candida spp., as well as much less hemolysis and cytotoxicity. POSS-HPG@Chol/AMB revealed total protection of Balb/C mice from severe Candida infections in an experimental model of systemic candidiasis and can effectively reduce or eliminate AMB liver and kidney tissue injuries. Thanks to their safety, biocompatibility, and unique therapeutic properties, the developed POSS-polyglycerol dendrimers could be viable nanostructures for the delivery of poorly soluble drugs like AMB.

Quaternized Chitosan Derivatives as Viable Antiviral Agents: Structure-Activity Correlations and Mechanisms of Action.

Cationic polysaccharides have demonstrated significant antimicrobial properties and have great potential in medical applications, where the antiviral activity is of great interest. As of today, alcohols and oxidizing agents are commonly used as antiviral disinfectants. However, these compounds are not environmentally safe, have short activity periods, and may cause health issues. Therefore, this study aimed to develop metal-free and environmentally friendly quaternary chitosans (QCs) with excellent long-lasting virucidal activity. To evaluate this, both single and double QCs were obtained using AETMAC ([2-(acryloyloxy)ethyl]-trimethylammonium chloride) and GTMAC (glycidyl trimethylammonium chloride) quaternary precursors. Further, this study investigated the influence of the quaternary functional group, charge density, and molecular weight (Mw) on the antiviral properties of QCs. It is proposed that the higher charge density, along with the length of alkyl linkers, and hydrophobic interactions affected the antiviral activity of QCs. The findings demonstrated that heterogeneously functionalized chitosan exhibited excellent antiviral activity against both the enveloped virus φ6 and the nonenveloped viruses φX174 and MS2. These quaternized chitosan derivatives have promising potential as viable antiviral agents, as hand/surface sanitizers, or in other biomedical applications.

L-asparaginase immobilization in supramolecular nanogels of PEG-grafted poly HPMA and bis(α-cyclodextrin) to enhance pharmacokinetics and lower enzyme antigenicity.

L-asparaginase (ASNase) enzyme has limited therapeutic use due to its poor pharmacokinetics and immunogenicity. To overcome these obstacles, we immobilized ASNase in biocompatible poly hydroxypropyl methacrylamide (P(HPMA))-based nanogels simply formed through the host-guest inclusion complex of ASNase-conjugated random copolymer of HPMA and polyethylene glycol (PEG) acrylate (P(HPMA-MPEGA)) and α-cyclodextrin dimer (bisCD) using cystamine as a linker. The effects of bisCD and polymer concentrations on particle size, gelation time, and recovery of enzyme activity were investigated. The ASNase-conjugated bisCD nanogels were discrete, homogeneous, and spherical with a mean projected diameter of 148 ± 41 nm. ASNase immobilized in the bisCD nanogels caused cytotoxicity on HL-60 cell line with IC50 of 3 IU/ml. In-vivo rat study revealed that the immobilized ASNase reduced the enzyme antigenicity and resulted in 8.1 folds longer circulation half-life than the native enzyme. Conclusively, immobilization of ASNase in P(HPMA-MPEGA) and bisCD supramolecular nanogels could enhance the therapeutic value of ASNase in cancer chemotherapy.

Direct and Indirect Cationization of Cellulose Nanocrystals: Structure-Properties Relationship and Virus Capture Activity.

Due to increasing public concern over hygiene, there have been many studies investigating antimicrobial and antiviral agents recently. With the aim of developing biobased virucidal/virus capture agents, we report a chemical modification of the cellulose nanocrystals (CNCs) surface with poly(2-dimethylamino) ethyl acrylate) methyl chloride quaternary salt (Q-PDMAEA) to introduce the positively charged functional groups. The surface of CNCs was modified through direct and indirect graft polymerization. Subsequently, the direct and indirect cationization effect on the degree of functionalization, thermal stability, crystallinity, and antiviral activity of CNCs was investigated. Indirect cationization produced the highest degree of polymer grafting, increasing particle size and thermal stability. Further, the modified CNCs were tested for their ability to capture nonenveloped bacteriophages PhiX174 (ΦX174) and MS2. We observed a significant (>4.19 log10) reduction in total viral load by specific functionalized CNCs. However, the activity depended on the structure of functional groups, surface charge density, and the type of virus under study. Overall, the direct and indirect cationization of CNC leads to biobased agents with immobilized cationic charge, with good virus capture activity. Such agents can be used for various applications including textiles, packaging, wastewater treatment, etc.

PLGA-graphene quantum dot nanocomposites targeted against αvß3 integrin receptor for sorafenib delivery in angiogenesis.

Angiogenesis is a vital step in many severe diseases such as cancer, diabetic retinopathy, and rheumatoid arthritis. Sorafenib (SFB), a multi-tyrosine kinase inhibitor, has recently been shown to inhibit tumor progression and suppress angiogenesis. Its narrow therapeutic window, however, has limited its clinical application and therapeutic efficacy. Accordingly, in this study, a nanocomposite formulation comprising of graphene quantum dots (GQDs) and poly (D, l-lactide-co-glycolide) (PLGA) nanoparticles was functionalized with an integrin-targeting ligand (RGD peptide) to improve SFB delivery for the treatment of angiogenesis. Physicochemical and biological properties of the targeted nanocomposite were evaluated in terms of chemical structure, morphology, particle size, zeta potential, photoluminescence, and cell toxicity. The loading capacity of the nanocomposite was optimized at different drug-to-PLGA ratios. Drug release behavior was also investigated at 37 °C in pH = 7.4. The SFB-to-PLGA ratio of 1:3 was selected as the optimum condition which resulted in the encapsulation efficiency and encapsulation capacity of 68.93 ± 1.39 and 18.77 ± 0.46, respectively. Photoluminescence properties of GQD in nanocomposite were used to track the delivery system. The results indicated that conjugating targeting ligand could enhance cellular uptake of nanocomposite in cells overexpressing integrin receptors. In vivo anti-angiogenesis activity of targeted nanocomposite was investigated in chick chorioallantoic membrane (CAM). The findings showed that SFB loaded in the targeted nanocomposite reduced VEGF secretion in vitro and its anti-angiogenic effect surpass free SFB. Thanks to its unique therapeutic and bioimaging properties, the developed nanocomposite could be an effective drug delivery system for poorly water-soluble therapeutic agents.

Amphiphilic hyperbranched polyglycerol nanoarchitectures for Amphotericin B delivery in Candida infections.

Although Amphotericin B (AMB) is considered the most effective anti-mycotic agent for treating Candida infections, its clinical use is limited due to its high toxicity. To address this issue, we developed cholesterol-based dendritic micelles of hyperbranched polyglycerol (HPG), including cholesterol-cored HPG (Chol-HPG) and cholesterol end-capped HPG (HPG@Chol), for AMB delivery. The findings suggested that the presence of cholesterol moieties could control AMB loading and release properties. Dendritic micelles inhibited AMB hemolysis and cytotoxicity in HEK 293 and RAW 264.7 cell lines while increasing antifungal activity against C. albicans biofilm formation. Furthermore, significantly lower levels of renal and liver toxicity biomarkers compared to Fungizone® ensured AMB-incorporated dendritic micelle biosafety, which was confirmed by histopathological evaluations. Overall, the Chol-HPG and HPG@Chol dendritic micelles may be a viable alternative to commercially available AMB formulations as well as an effective delivery system for other poorly soluble antifungal agents.

Recent advances in design and applications of biomimetic self-assembled peptide hydrogels for hard tissue regeneration.

ABSTRACT: The development of natural biomaterials applied for hard tissue repair and regeneration is of great importance, especially in societies with a large elderly population. Self-assembled peptide hydrogels are a new generation of biomaterials that provide excellent biocompatibility, tunable mechanical stability, injectability, trigger capability, lack of immunogenic reactions, and the ability to load cells and active pharmaceutical agents for tissue regeneration. Peptide-based hydrogels are ideal templates for the deposition of hydroxyapatite crystals, which can mimic the extracellular matrix. Thus, peptide-based hydrogels enhance hard tissue repair and regeneration compared to conventional methods. This review presents three major self-assembled peptide hydrogels with potential application for bone and dental tissue regeneration, including ionic self-complementary peptides, amphiphilic (surfactant-like) peptides, and triple-helix (collagen-like) peptides. Special attention is given to the main bioactive peptides, the role and importance of self-assembled peptide hydrogels, and a brief overview on molecular simulation of self-assembled peptide hydrogels applied for bone and dental tissue engineering and regeneration.

Graphene Family Nanomaterials in Ocular Applications: Physicochemical Properties and Toxicity.

Graphene family nanomaterials (GFNs) are rapidly emerging for ocular applications due to their outstanding physicochemical properties. Since the eyes are very sensitive organs and the contact between the eyes and GFNs in eye drops, contact lenses, intraocular drug delivery systems and biosensors and even the workers handling these nanomaterials is inevitable, it is necessary to investigate their ocular toxicities and physiological interactions with cells as well as their toxicity mechanisms. The toxicity of GFNs can be extremely affected by their physicochemical properties, including composition, size, surface chemistry, and oxidation level as well as dose and the time of exposure. Up to now, there are several studies on the in vitro and in vivo toxicity of GFNs; however, a comprehensive review on ocular toxicity and applications of GFNs is missing, and a knowledge about the health risks of eye exposure to the GFNs is predominantly unspecified. This review highlights the ocular applications of GFNs and systematically covers the most recent advances of GFNs' physicochemical properties, in vitro and in vivo ocular toxicity, and the possible toxicity mechanisms as well as provides some perspectives on the potential risks of GFNs in material development and biomedical applications.

Polymeric drug delivery systems by additive manufacturing.

Additive manufacturing (AM) is gaining interests in drug delivery applications, offering innovative opportunities for the design and development of systems with complex geometry and programmed controlled release profile. In addition, polymer-based drug delivery systems can improve drug safety, efficacy, patient compliance, and are the key materials in AM. Therefore, combining AM and polymers can be beneficial to overcome the existing limitations in the development of controlled release drug delivery systems. Considering these advantages, here we are focusing on the recent developments in the field of polymeric drug delivery systems prepared by AM. This review provides a comprehensive overview on a holistic polymer-AM perspective for drug delivery systems with discussion on the materials, properties, design and fabrication techniques and the mechanisms used to achieve a controlled release system. The current challenges and future perspectives for personalized medicine and clinical use of these systems are also briefly discussed.

Structural, mechanical, and biological characterization of hierarchical nanofibrous Fmoc-phenylalanine-valine hydrogels for 3D culture of differentiated and mesenchymal stem cells.

Fmoc-dipeptides are a class of short aromatic peptides featuring eminent supramolecular self-assembly, which is due to the aromaticity of the Fmoc group, which improves the association of peptide building blocks. This study aimed to introduce a new dipeptide hydrogel scaffold, Fmoc-phenylalanine-valine (Fmoc-FV), for 3D culture of various cells. Peptide hydrogel scaffolds were prepared by the pH-titration method in various concentrations and temperatures, and characterized by spectroscopic methods, including circular dichroism, attenuated total reflection FT-IR and fluorimetry. Mechanical behaviors such as thixotropy and temperature-sensitivity were investigated by oscillatory rheology. The Fmoc-FV hydrogels were then applied in 3D-culture of WJ-MSCs (mesenchymal stem cells), HUVECs (normal endothelial cells), and MDA-MB231 (tumor cell line) by live-dead fluorescence microscopy and Alamar blue viability assay experiments. The results confirmed that the ß-sheet structure is principally interlocked by π-π stacking of the Fmoc groups and entangled nanofibrous morphologies as revealed by FE-SEM. Fmoc-FV self-assembly in physiologic conditions resulted in a thermo-sensitive and shear-thinning hydrogel. Notably, the Fmoc-FV hydrogel exhibited cell type-dependent biological activity, so higher cell proliferation was attained in HUVEC or MDA-MB231 cells than WJ-MSCs, indicating a possible need for incorporating cell-adhesion ligands in the Fmoc-FV hydrogel matrix. Therefore, the structural and biological properties of the Fmoc-dipeptide hydrogels are inter-related and can affect their applications in 3D cell culture and regenerative medicine.

Citric acid functionalized silane coupling versus post-grafting strategy for dual pH and saline responsive delivery of cisplatin by Fe3O4/carboxyl functionalized mesoporous SiO2 hybrid nanoparticles: A-synthesis, physicochemical and biological characterization.

Synthesis of monodisperse carboxylic acid-functionalized magnetic mesoporous silica nanoparticles is performed by either two-step sol-gel process or post-grafting using citric acid modified isocyanate silane coupling agent (MMSN-NCO-CA) or succinic anhydride modified magnetic mesoporous silica (MMSN-NH-SA). Morphology, structure and magnetic properties of bare and mesoporous silica coated Fe3O4 core were studied using various techniques such as FTIR, VSM, TEM, FESEM, XRD and N2 adsorption-desorption isotherms (BET). Cisplatin (cis-Pt) adsorption isotherms and its release profile in various media were investigated by ICP-OES. MMSN-NCO-CA with mean particle size 107 nm had lower surface area (87.5 m2/g) and larger pore size (6.9 nm) in comparison with MMSN-NH-SA (respective values of 151.2 m2/g and 3.5 nm). cis-Pt loading into particles followed a saturable adsorption with respect to the drug to particle mass ratios. More sustained release of cis-Pt was observed for MMSN-NCO-CA, though both nanoparticles exhibited a pH- and saline concentration-dependent drug release. In addition, general and cis-Pt specific cytotoxicity were examined by MTT assay in MDA-MB-231 breast cancer cell line, and to further detect apoptosis, acridine orange/ethidium bromide dual cell staining was investigated by fluorescence microscopy. In-vitro anti-tumor efficiency of cis-Pt loaded MMSN-NCO-CA and MMSN-NH-SA were similarly enhanced in comparison to free cis-Pt; however, more specific apoptotic death occurred for cis-Pt loaded MMSN-NCO-CA. Therefore, the as-synthesized citric acid functionalized core-shell magnetic mesoporous hybrid nanoparticles could be used as a promising drug carriers for cancer therapy in-vivo.

Synthesis, structural and in-vitro characterization of ß-cyclodextrin grafted L-phenylalanine functionalized graphene oxide nanocomposite: A versatile nanocarrier for pH-sensitive doxorubicin delivery.

To enhance graphene stability, drug loading capacity and biocompatibility, ß-cyclodextrin (ß-CD) was grafted onto graphene oxide (GO) using L-plenylalanine (Phe) as a linker. The doxorubicin (DOX) loading efficiency and capacity of GO-Phe-CD were 78.7% and 85.2%, respectively. The cone shaped cavity of CD acts as a host for DOX loading through inclusion complex formation. The GO-Phe-CD nanocarrier showed higher release ratio of DOX in acidic milieu of cancer cells. In addition, general cytotoxicity of the nanocarriers was examined by MTT assay and trypan blue dye exclusion in MCF-7 cell lines. It was established that the MTT assay was not an appropriate technique for predicting the cytotoxicity of graphene based nanocarriers due to the spontaneous formation of MTT formazan by these materials; leading to a false high biocompatibility. According to the trypan blue experiment, the GO-Phe-CD had significant cytocompatibility, and the DOX-loaded GO-Phe-CD had outstanding killing capability to MCF-7 cells.

Tailored functionalization of ZnO nanoparticle via reactive cyclodextrin and its bionanocomposite synthesis.

ß-cyclodextrin was grafted onto the surface of ZnO nanoparticles via efficient, simple and fast technique through nucleophilic substitution reaction of OH groups on ZnO nanoparticle surface with reactive cyclic oligosaccharide, Monochlorotriazinyl-ß-cyclodextrin (MCT-ß-CD). Characterization of functionalized ZnO nanoparticles were carried out by Fourier transform infrared spectra (FT-IR), elemental analysis (CHN), Thermogravimetric analysis (TGA), X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The amount of MCT-ß-CD bonded to the ZnO surface was determined by CHN and TGA analysis. Followed by, innovative poly(ester-amide)/ZnO bionanocomposites (PEA/ZnO BNCs) were fabricated through solution mixing method. Due to using biodegradable amino acid containing polymer, the synthesized nanocomposites are expected to classify as biologically active materials. Morphological studies of prepared BNC proved good distribution of modified ZnO in PEA matrix with nanoscale size. Good dispersion and less aggregation, indicate the effect of functionalization on preventing nanoparticles to aggregate.

Fabrication of biodegradable poly(ester-amide)s based on tyrosine natural amino acid.

N,N'-Bis[2-(methyl-3-(4-hydroxyphenyl)propanoate)]isophthaldiamide (5), a novel diol monomer containing chiral group, was prepared by the reaction of S-tyrosine methyl ester (3) with isophthaloyl dichloride (4a). A new family of optically active and potentially biodegradable poly(ester-amide)s (PEAs) based on tyrosine amino acid were prepared by the polycondensation reaction of diol monomer 5 with several aromatic diacid chlorides. The resulting new polymers were obtained in good yields with inherent viscosities ranging between 0.25 and 0.42 dL/g and are soluble in polar aprotic solvents. They showed good thermal stability and high optical purity. The synthetic compounds were characterized and studied by FT-IR, 1H-NMR, specific rotation, elemental and thermogravimetric analysis (TGA) techniques and typical ones by 13C-NMR, differential scanning calorimetry (DSC), X-ray diffraction (XRD), and field emission scanning electron microscopy (FE-SEM) analysis. Soil burial test of the diphenolic monomer 5, and obtained PEA6a, and soil enzymatic assay showed that the synthesized diol and its polymer are biologically active and probably biodegradable in soil environment.