Combining spore germination and heat inactivation to decontaminate materials contaminated with Bacillus anthracis spores.

AIMS: To add a spore germination step in order to reduce decontamination temperature and time requirements compared to the current hot, humid air decontamination parameters, which are 75-80°C, ≥72 h, 70-90% RH, down to ≤60°C and ≤24 h total decontamination time. METHODS AND RESULTS: Bacillus anthracis spore germination with l-alanine+inosine+calcium dipicolinate (CaDPA) was quantified at 0-40°C, several time points and spore concentrations of 5-9 log10 per ml. Germination efficiency at 0-40°C was >99% at <8 log10 spores per ml. The temperature optimum was 20°C. Germination efficiency was significantly higher but slower at 0°C compared to ≥30°C at ≥8 log10 spores per ml. A single germinant application followed by 60°C, 1-h treatment consistently inactivated >2 log10 (>99%) of spores. However, a repeat application of germinant was needed to achieve the objective of ≥6 log10 spore inactivation out of a 7 log10 challenge (≥99·9999%) for ≤24 h total decontamination time for nylon and aircraft performance coating. CONCLUSIONS: l-alanine+inosine+CaDPA stimulated germination across wide temperature and spore concentration ranges. SIGNIFICANCE AND IMPACT OF THE STUDY: Germination expands the scope of spore decontamination to include materials from any industry sector that can be sprayed with an aqueous germinant solution.

Hot, humid air decontamination of a C-130 aircraft contaminated with spores of two acrystalliferous Bacillus thuringiensis strains, surrogates for Bacillus anthracis.

AIM: To develop test methods and evaluate survival of Bacillus thuringiensis kurstaki cry(-) HD-1 and B. thuringiensis Al Hakam spores after exposure to hot, humid air inside of a C-130 aircraft. METHODS AND RESULTS: Bacillus thuringiensis spores were either pre-inoculated on 1 × 2 or 2 × 2 cm substrates or aerosolized inside the cargo hold of a C-130 and allowed to dry. Dirty, complex surfaces (10 × 10 cm) swabbed after spore dispersal showed a deposition of 8-10 log10 m(-2) through the entire cargo hold. After hot, humid air decontamination at 75-80°C, 70-90% relative humidity for 7 days, 87 of 98 test swabs covering 0·98 m(2) , showed complete spore inactivation. There was a total of 1·67 log10 live CFU detected in 11 of the test swabs. Spore inactivation in the 98 test swabs was measured at 7·06 log10 m(-2) . CONCLUSIONS: Laboratory test methods for hot, humid air decontamination were scaled for a large-scale aircraft field test. The C-130 field test demonstrated that hot, humid air can be successfully used to decontaminate an aircraft. SIGNIFICANCE AND IMPACT OF THE STUDY: Transition of a new technology from research and development to acquisition at a Technology Readiness Level 7 is unprecedented.