Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 4 de 4
Filter
Add more filters










Database
Type of study
Language
Publication year range
1.
Oper Dent ; 39(6): 637-43, 2014.
Article in English | MEDLINE | ID: mdl-24819598

ABSTRACT

OBJECTIVE: This study evaluated the degree of conversion (DC) and the water sorption/solubility of preheated single-bottle adhesive systems. METHODS AND MATERIALS: Five adhesive systems were tested: Adper Easy One and Adper Single Bond 2 (3M ESPE), Excite and Tetric N-Bond (Ivoclar/Vivadent), and XP Bond (Dentsply/Caulk). After storage for two hours at 25°C or 60°C, 50 samples (n=5) were prepared for all adhesive systems and stored dry in lightproof containers at 37°C for 24 hours. Fourier transform infrared/attenuated total reflectance spectroscopy was used to evaluate the DC, and water sorption/solubility was measured by means of mass loss and gain after water storage. The data were analyzed by two-way analysis of variance followed by Tukey's test (p<0.05). RESULTS: Preheated adhesive systems showed statistically significantly higher DC than those kept at 25°C. Except for XP Bond, preheated adhesive systems presented statistically significantly lower water sorption/solubility means. CONCLUSIONS: Preheating improved the DC for all tested adhesive systems. Also, it promoted a decrease of water sorption/solubility, except for the XP Bond adhesive system.


Subject(s)
Dental Cements , Hot Temperature , Water/chemistry , Solubility
2.
Oper Dent ; 38(5): 512-8, 2013.
Article in English | MEDLINE | ID: mdl-23327228

ABSTRACT

This study aimed to evaluate the bond durability of dentin restorations bonded with light- or dual-cured etch-and-rinse adhesive systems. A three-step adhesive system (Scotchbond Multipurpose Plus), an acetone-based two-step adhesive system (Prime & Bond 2.1), and an ethanol-based two-step adhesive system (Excite) were tested. Both the light- and the dual-cured versions were evaluated. High C-factor dentin cavities were prepared on 120 bovine incisors, which were then restored with resin composite (n=10). The samples were stored in water for 24 hours, and half of them were subjected to additional degradation with 10% NaOCl for five hours. The push-out bond strength test was performed in a universal testing machine until failure. Failure modes were evaluated by scanning electron microscopy. Data were analyzed by three-way analysis of variance and Tukey tests (p<0.05). The dual-cured adhesive system presented a higher immediate bond strength and durability than those that were light cured. The three-step adhesive system produced the highest values, whereas the acetone-based adhesive system produced the lowest result. Therefore, the use of dual-cured etch-and-rinse adhesive systems can induce increased bond durability to direct coronal dentin restorations.


Subject(s)
Dental Etching/methods , Dental Restoration, Permanent/methods , Dentin-Bonding Agents/therapeutic use , Acetone/therapeutic use , Animals , Cattle , Dental Stress Analysis , Incisor , Light-Curing of Dental Adhesives/methods , Polymethacrylic Acids/therapeutic use , Resin Cements/therapeutic use , Self-Curing of Dental Resins/methods
3.
Aust Dent J ; 57(2): 213-9, 2012 Jun.
Article in English | MEDLINE | ID: mdl-22624764

ABSTRACT

BACKGROUND: Different enhanced peroxide formulations have been developed to overcome mineral loss during tooth whitening. This study investigated the impact on tooth whitening from combining a CPP-ACP paste with home peroxide agents at several proportions. METHODS: Ninety bovine incisors were randomly allocated into nine groups (n = 10) and exposed to 7.5% hydrogen peroxide (HP), 16% carbamide peroxide (CP), a CPP-ACP paste (Tooth Mousse/MI Paste, GC Corporation, Tokyo, Japan) and blends of HP/CP:MI at three proportions (1:1, 2:1 and 1:2). Tooth whitening was performed for 14 days and its effectiveness was measured by a spectrophotometer utilizing the CIE L*a*b* system (ΔE, ΔL*, Δa* and Δb*). Colour readings were measured at baseline (T0), 7 days of bleaching (T7), 14 days of bleaching (T14) and 7 days after the end of bleaching (T21). Data were analysed by two-way ANOVA for paired averages followed by the Tukey's test and Pearson's correlation at 5%. RESULTS: Although CP produced the greatest colour change (ΔE), all whitening protocols were considered to be effective regardless of the CPP-ACP presence. In general, greater changes in ΔE, ΔL*, Δa* and Δb* were detected at T14, with T21 exhibiting similar results to those at T7. A greater number of strong correlations with ΔE values was found for a* (11/15). CONCLUSIONS: Within the limitations of this study, the results indicate that the CPP-ACP paste did not affect tooth whitening efficacy.


Subject(s)
Caseins/pharmacology , Tooth Bleaching Agents/administration & dosage , Tooth Bleaching/methods , Animals , Carbamide Peroxide , Cattle , Colorimetry , Dentin/drug effects , Drug Antagonism , Drug Combinations , Hydrogen Peroxide/administration & dosage , Peroxides/administration & dosage , Spectrophotometry , Urea/administration & dosage , Urea/analogs & derivatives
4.
Oper Dent ; 36(5): 521-8, 2011.
Article in English | MEDLINE | ID: mdl-21819199

ABSTRACT

This study was designed to evaluate in vitro the efficacy of a novel at-home bleaching technique using 10% or 16% carbamide peroxide modified by casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) and its influence on the microhardness of bleached enamel. A total of 40 bovine incisors were divided into four groups (n=10) according to the bleaching agent used: 10% carbamide peroxide only; a blend of 10% carbamide peroxide and a CPP-ACP paste; 16% carbamide peroxide only; and a blend of 16% carbamide peroxide and a CPP-ACP paste. During the 14-day bleaching regimen, the samples were stored in artificial saliva. The Vickers microhardness and color of the teeth were assessed at baseline (T0) and immediately after the bleaching regimen (T14) using a microhardness tester and a spectrophotometer, respectively. The degree of color change was determined by the Commission Internationale de l'Eclariage (CIE) L*a*b* system (ΔE, ΔL*, Δa*, and Δb*) and Vita shade guide parameters. The data were analyzed by analysis of variance and the Tukey test (p<0.05). The teeth that were bleached with a blend of peroxide (10% or 16%) and the CPP-ACP paste presented increased microhardness values at T14 compared with T0, whereas the samples that were bleached with peroxide only did not show any differences in their microhardness values. All of the bleaching agents were effective at whitening the teeth and did not show a statistically significant difference using the CIEL*a*b* system (ΔE, ΔL*, Δa*, and Δb*) or the Vita shade guide parameters. The use of a CPP-ACP paste with carbamide peroxide bleaching agents increased the bleached enamel's microhardness and did not have an influence on whitening efficacy.


Subject(s)
Cariostatic Agents/therapeutic use , Caseins/therapeutic use , Dental Enamel/drug effects , Peroxides/therapeutic use , Tooth Bleaching Agents/therapeutic use , Tooth Bleaching/methods , Urea/analogs & derivatives , Aluminum Oxide/chemistry , Animals , Carbamide Peroxide , Cariostatic Agents/administration & dosage , Caseins/administration & dosage , Cattle , Color , Dental Enamel/pathology , Dental Etching/methods , Hardness , Hydrogen-Ion Concentration , Materials Testing , Peroxides/administration & dosage , Random Allocation , Saliva, Artificial/chemistry , Spectrophotometry , Tea , Temperature , Time Factors , Tooth Bleaching Agents/administration & dosage , Tooth Discoloration/drug therapy , Tooth Discoloration/pathology , Urea/administration & dosage , Urea/therapeutic use , Wine
SELECTION OF CITATIONS
SEARCH DETAIL
...