Graphene Oxide/Polyethylenimine Aerogels for the Removal of Hg(II) from Water.

This article reports the synthesis of an aerogel involving reduced graphene oxide (rGO) and polyethylenimine (PEI), and describes its potential application as an effective sorbent to treat Hg(II) contaminated water. The rGO/PEI sorbent was synthetized using a supercritical CO2 method. N2 physisorption, electron microscopy, and elemental mapping were applied to visualize the meso/macroporous morphology formed by the supercritical drying. The advantages of the synthetized materials are highlighted with respect to the larger exposed GO surface for the PEI grafting of aerogels vs. cryogels, homogeneous distribution of the nitrogenated amino groups in the former and, finally, high Hg(II) sorption capacities. Sorption tests were performed starting from water solutions involving traces of Hg(II). Even though, the designed sorbent was able to eliminate almost all of the metal from the water phase, attaining in very short periods of time residual Hg(II) values as low as 3.5 µg L-1, which is close to the legal limits of drinking water of 1-2 µg L-1. rGO/PEI exhibited a remarkably high value for the maximum sorption capacity of Hg(II), in the order of 219 mg g-1. All of these factors indicate that the designed rGO/PEI aerogel can be considered as a promising candidate to treat Hg(II) contaminated wastewater.

Bacterial cellulose/graphene oxide aerogels with enhanced dimensional and thermal stability.

We present a novel method for processing bacterial cellulose/graphene oxide (BC/GO) aerogels with multifunctional properties. The addition of a small amount of dimethyl sulfoxide (DMSO) to the aqueous dispersion of the nanomaterials during the gelification process affected the water freezing temperature of the system and thereby affecting the porous structure of the aerogel obtained after liophilization. The possibility to obtain small and elongated pore with axial orientation allowed a significant improvement of the structural stability of the aerogels. Moreover, the aerogels reduction by thermal treatment with ammonia gas induced crosslinking between the different nanophases, thus given an incremental factor for the mechanical performance of the aerogels under harsh conditions. The resulting aerogels also showed significant improvements in terms of thermal stability and electrical conductivity. These multifunctional BC/GO aerogels present high potential as sustainable and ecological alternative materials for lightweight packaging, filters for atmosphere and water treatment, or energy applications.

Preparation and Characterization of Graphene Oxide Aerogels: Exploring the Limits of Supercritical CO2 Fabrication Methods.

The supercritical carbon dioxide (scCO2 ) synthesis of non-reduced graphene oxide (GO) aerogels from dispersions of GO in ethanol is here reported as a low-cost, efficient, and environmentally friendly process. The preparation is carried out under the mild conditions of 333 K and 20 MPa. The high aspect ratio of the used GO sheets (ca. 30 µm lateral dimensions) allowed the preparation of aerogel monoliths by simultaneous scCO2 gelation and drying. Solid-state characterization results indicate that a thermally-stable mesoporous non-reduced GO aerogel was obtained by using the supercritical procedure, keeping most of the surface oxygenated groups on the GO sheets, thus, facilitating further functionalization. Moreover, the monoliths have a very low density, high specific surface area, and excellent mechanical integrity; characteristics which rival those of most light-weight reduced graphene aerogels reported in the literature.

An Unprecedented Stimuli-Controlled Single-Crystal Reversible Phase Transition of a Metal-Organic Framework and Its Application to a Novel Method of Guest Encapsulation.

The flexibility and unexpected dynamic behavior of a third-generation metal-organic framework are described for the first time. The synthetic strategy is based on the flexibility and spherical shape of dipyridyl-based carborane linkers that act as pillars between rigid Co/BTB (BTB: 1,3,5-benzenetricarboxylate) layers, providing a 3D porous structure (1). A phase transition of the solid can be induced to generate a new, nonporous 2D structure (2) without any loss of the carborane linkers. The structural transformation is visualized by snapshots of the multistep single-crystal-to-single-crystal transformation by single-crystal and powder X-ray diffraction. Poor hydrogen bond acceptors such as MeOH, CHCl3 or supercritical CO2 induce such a 3D to 2D transformation. Remarkably, the transformation is reversible and the 2D phase 2 is further converted back into 1 by heating in dimethylformamide. The energy requirements involved in such processes are investigated using periodic density functional theory calculations. As a proof of concept for potential applications, encapsulation of C60 is achieved by trapping this molecule during the reversible 2D to 3D phase transition, whereas no adsorption is observed by straight solvent diffusion into the pores of the 3D phase.