Defined covalent attachment of three cancer drugs to DNA origami increases cytotoxicity at nanomolar concentration.

DNA nanostructures have captured great interest as drug delivery vehicles for cancer therapy. Despite rapid progress in the field, some hurdles, such as low cellular uptake, low tissue specificity or ambiguous drug loading, remain unsolved. Herein, well-known antitumor drugs (doxorubicin, auristatin, and floxuridine) were site-specifically incorporated into DNA nanostructures, demonstrating the potential advantages of covalently linking drug molecules via structural staples instead of incorporating the drugs by noncovalent binding interactions. The covalent strategy avoids critical issues such as an unknown number of drug-DNA binding events and premature drug release. Moreover, covalently modified origami offers the possibility of precisely incorporating several synergetic antitumor drugs into the DNA nanostructure at a predefined molar ratio and to control the exact spatial orientation of drugs into DNA origami. Additionally, DNA-based nanoscaffolds have been reported to have a low intracellular uptake. Thus, two cellular uptake enhancing mechanisms were studied: the introduction of folate units covalently linked to DNA origami and the transfection of DNA origami with Lipofectamine. Importantly, both methods increased the internalization of DNA origami into HTB38 and HCC2998 colorectal cancer cells and produced greater cytotoxic activity when the DNA origami incorporated antiproliferative drugs. The results here present a successful and conceptually distinct approach for the development of DNA-based nanostructures as drug delivery vehicles, which can be considered an important step towards the development of highly precise nanomedicines.

On the uptake of cationic liposomes by cells: From changes in elasticity to internalization.

In this study, we assessed the capacity of a previously reported engineered liposomal formulation, which had been tested against model membranes mimicking the lipid composition of the HeLa plasma membrane, to fuse and function as a nanocarrier in cells. We used atomic force microscopy to observe physicochemical changes on the cell surface and confocal microscopy to determine how the liposomes interact with cell membranes and released their load. In addition, we performed viability assays using methotrexate as an active drug to obtain proof of concept of the formulation´s capacity to function as a drug delivery-system. The interaction of engineered liposomes with living cells corroborates the information obtained using model membranes and supports the capacity of the engineered liposomal formulation to serve as a potential nanocarrier.

Studying Lipid Membrane Interactions of a Super-Cationic Peptide in Model Membranes and Living Bacteria.

The super-cationic peptide dendrimers (SCPD) family is a valuable class of antimicrobial peptide candidates for the future development of antibacterial agents against multidrug-resistant gram-negative bacteria. The deep knowledge of their mechanism of action is a major challenge in research, since it may be the basis for future modifications/optimizations. In this work we have explored the interaction between SCPD and membranes through biophysical and microbiological approaches in the case of the G1OLO-L2OL2 peptide. Results support the idea that the peptide is not only adsorbed or close to the surface of the membrane but associated/absorbed to some extent to the hydrophobic-hydrophilic region of the phospholipids. The presence of low concentrations of the peptide at the surface level is concomitant with destabilization of the cell integrity and this may contribute to osmotic stress, although other mechanisms of action cannot be ruled out.

Dielectric properties and lamellarity of single liposomes measured by in-liquid scanning dielectric microscopy.

Liposomes are widely used as drug delivery carriers and as cell model systems. Here, we measure the dielectric properties of individual liposomes adsorbed on a metal electrode by in-liquid scanning dielectric microscopy in force detection mode. From the measurements the lamellarity of the liposomes, the separation between the lamellae and the specific capacitance of the lipid bilayer can be obtained. As application we considered the case of non-extruded DOPC liposomes with radii in the range ~ 100-800 nm. Uni-, bi- and tri-lamellar liposomes have been identified, with the largest population corresponding to bi-lamellar liposomes. The interlamellar separation in the bi-lamellar liposomes is found to be below ~ 10 nm in most instances. The specific capacitance of the DOPC lipid bilayer is found to be ~ 0.75 µF/cm2 in excellent agreement with the value determined on solid supported planar lipid bilayers. The lamellarity of the DOPC liposomes shows the usual correlation with the liposome's size. No correlation is found, instead, with the shape of the adsorbed liposomes. The proposed approach offers a powerful label-free and non-invasive method to determine the lamellarity and dielectric properties of single liposomes.

Cholesterol Effect on the Specific Capacitance of Submicrometric DOPC Bilayer Patches Measured by in-Liquid Scanning Dielectric Microscopy.

The specific capacitance of biological membranes is a key physical parameter in bioelectricity that also provides valuable physicochemical information on composition, phase, or hydration properties. Cholesterol is known to modulate the physicochemical properties of biomembranes, but its effect on the specific capacitance has not been fully established yet. Here we use the high spatial resolution capabilities of in-liquid scanning dielectric microscopy in force detection mode to directly demonstrate that DOPC bilayer patches at 50% cholesterol concentration show a strong reduction of their specific capacitance with respect to pure DOPC bilayer patches. The reduction observed (∼35%) cannot be explained by the small increase in bilayer thickness (∼16%). We suggest that the reduction of the specific capacitance might be due to the dehydration of the polar head groups caused by the insertion of cholesterol molecules in the bilayer. The results reported confirm the potential of in-liquid SDM to study the electrical and physicochemical properties of lipid bilayers at very small scales (down to ∼200 nm here), with implications in fields such as biophysics, bioelectricity, biochemistry, and biosensing.

Characterization of monolayers and liposomes that mimic lipid composition of HeLa cells.

In this work, based on several studies, we develop an artificial lipid membrane to mimic the HeLa cell membrane using 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylcholine (POPC), 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE), 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-l-serine (POPS) and cholesterol (CHOL). This is then a means to further study the fusion process of specific engineered liposomes. To characterize the mimicked HeLa cell membrane, we determined a series of surface pressure-area (π-A) isotherms and the isothermal compression modulus was calculated together with the dipole moment normal to the plane of the monolayer. The existence of laterally segregated domains was assessed using a fluorescence technique (Laurdan) and two microscopy techniques: Brewster angle microscopy (BAM) and atomic force microscopy (AFM) of Langmuir-Blodgett films (LBs) extracted at 30 mN m-1. To examine the nature and composition of the observed domains, force spectroscopy (FS) based on AFM was applied to the LBs. Finally, two engineered liposome formulations were tested in a fusion assay against mimicked HeLa cell membrane LBs, showing good results and thereby opening the door to further assays and uses.

Planar lipid bilayers formed from thermodynamically-optimized liposomes as new featured carriers for drug delivery systems through human skin.

The fundamental objective pursued in this work is to investigate how liposomes formed with a thermodynamically optimized molar composition formed by the main components of the stratum corneum matrix behave on the human skin surface when used as drug delivery systems. To this purpose we engineered liposomes using phosphatidylcholines, ceramides and cholesterol. The specific molar ratio of the three components was established after studying the mixing properties of the lipid monolayers of the lipid components formed at the air-water interface. Liposomes loaded and unloaded with ibuprofen and hyaluronic acid were characterized by quasi-elastic light scattering and fluorescence polarization. Optimized liposomes, with and without drugs, were applied onto human skin and the structures formed evaluated using atomic force microscopy. Since penetration enhancers improve the permeation of the drugs encapsulated, we also examined the effects of Tween® 80 on the physical properties of the liposomes and on their extensibility over skin. In the present work we were able to observe the deposition and extension of liposomes in suspension onto human skin demonstrating the potential of liposomes without a secondary vehicle for releasing drugs in transdermal applications.

Effect of cholesterol on monolayer structure of different acyl chained phospholipids.

In this work we have investigated the effect of cholesterol (CHOL) in phospholipid monolayers on a series of phosphatidylcholines differing in acyl chain composition. We have used the CHOL proportion that abolishes the gel (Lß)-to-liquid-crystalline (Lß) transition in bilayers in order to investigate the mixing properties and laterally-segregated domains formed by specific phospholipid-CHOL ratios at the air-water interface. The binary monolayers where formed by mixing CHOL with 1,2-palmitoyl-sn-glycero-3-phos-phatidylcholine (DPPC);1,2-distearoyl-sn-glycero-3-phosphatidylcholine (DSPC); 1-pal-mitoyl-2-stearoyl-sn-glycero-3-phosphatidylcholine (PSPC); 1-palmitoyl-2-oleoyl-sn-gly-cero-3-phosphatidylcholine (POPC) and 1-palmitoyl-2-linoleyl-sn-glycero-3-phosphatidyl-choline (PLPC), respectively. From surface pressure-area (π-A) isotherms the isothermal compression modulus were calculated, and the mixing properties of the monolayers obtained by performing a basic surface thermodynamic analysis. From the excess Gibbs energy, the interaction parameter and the activity coefficients were also calculated. The study of the monolayers was complemented by determining the molecular dipole moment normal to the plane of the monolayer. The existence of laterally segregated domains was assessed by atomic force microscopy (AFM) of Langmuir-Blodgett films (LBs) extracted at 30 mNm-1. To get insight into the nature and composition of the observed domains force spectroscopy (FS) based on AFM was applied to the LBs.

Critical Temperature of 1-Palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine Monolayers and Its Possible Biological Relevance.

Because transmembrane proteins (TMPs) can be obtained with sufficient purity for X-ray diffraction studies more frequently than decades ago, their mechanisms of action may now be elucidated. One of the pending issues is the actual interplay between transmembrane proteins and membrane lipids. There is strong evidence of the involvement of specific lipids with some membrane proteins, such as the potassium crystallographically sited activation channel (KcsA) of Streptomyces lividans and the secondary transporter of lactose LacY of Escherichia coli, the activities of which are associated with the presence of anionic phospholipids such as the phosphatidylglycerol (PG) and phosphatidyethanolamine (PE), respectively. Other proteins such as the large conductance mechanosensitive channel (MscL) of E. coli seem to depend on the adaptation of specific phospholipids to the irregular surface of the integral membrane protein. In this work we investigated the lateral compressibility of two homoacid phosphatidylethanolamines (one with both acyl chains unsaturated (DOPE), the other with the acyl chains saturated (DPPE)) and the heteroacid phosphatidyletanolamine (POPE) and their mixtures with POPG. The liquid expanded (LE) to liquid condensed (LC) transition was observed in POPE at a temperature below its critical temperature (Tc = 36 °C). Because Tc lies below the physiological temperature, the occurrence of this phase transition may have something to do with the functioning of LacY. This magnitude is discussed within the context of the experiments carried out at temperatures below the Tc of POPE at which the activity of Lac Y and other TMPs are frequently studied.

Mapping phase diagrams of supported lipid bilayers by atomic force microscopy.

In this work, we present the method followed to construct a pseudophase diagram of two phospholipids: 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine and 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-(1'-rac-glycerol). Two different techniques, DSC and AFM, have been used based in the determination of the onset (Tonset ) and completion (Toffset ) temperatures of the gel-to-liquid crystalline phases (Lß â†’Lα ), the first from the endotherms from liposomes and the second from the topographic images of supported lipid bilayers. The features of both phase diagrams are discussed emphasizing the influence of Ca2+ presence and the substrate (mica) on the transition undergone by the phospholipid mixture. Microsc. Res. Tech. 80:4-10, 2017. © 2016 Wiley Periodicals, Inc.

Enhanced topical delivery of hyaluronic acid encapsulated in liposomes: A surface-dependent phenomenon.

In the present study, we investigated the release and permeation of hyaluronic acid (HA) encapsulated in liposomes when deposited onto two surfaces: cellulose, a model widely used for investigating transport of drugs; and human skin, a natural biointerface used for transdermal drug delivery. We prepared and characterised liposomes loaded with HA and liposomes incorporating two penetration enhancers (PEs): the non-ionic surfactant Tween 80, and Transcutol P, a solubilising agent able to mix with polar and non-polar solvents. In vitro and ex vivo permeation assays showed that PEs indeed enhance HA-release from liposomes. Since one of the possible mechanisms postulated for the action of liposomes on skin is related to its adsorption onto the stratum corneum (SC), we used atomic force microscopy (AFM) topography and force volume (FV) analysis to investigate the structures formed after deposition of liposome formulations onto the investigated surfaces. We explored the possible relationship between the formation of planar lipid structures on the surfaces and the permeation of HA.

Unspecific membrane protein-lipid recognition: combination of AFM imaging, force spectroscopy, DSC and FRET measurements.

In this work, we will describe in quantitative terms the unspecific recognition between lactose permease (LacY) of Escherichia coli, a polytopic model membrane protein, and one of the main components of the inner membrane of this bacterium. Supported lipid bilayers of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG) (3:1, mol/mol) in the presence of Ca(2+) display lateral phase segregation that can be distinguished by atomic force microscopy (AFM) as well as force spectroscopy. LacY shows preference for fluid (Lα) phases when it is reconstituted in POPE : POPG (3:1, mol/mol) proteoliposomes at a lipid-to-protein ratio of 40. When the lipid-to-protein ratio is decreased down to 0.5, two domains can be distinguished by AFM. While the upper domain is formed by self-segregated units of LacY, the lower domain is constituted only by phospholipids in gel (Lß) phase. On the one hand, classical differential scanning calorimetry (DSC) measurements evidenced the segregation of a population of phospholipids and point to the existence of a boundary region at the lipid-protein interface. On the other hand, Förster Resonance Energy Transfer (FRET) measurements in solution evidenced that POPE is selectively recognized by LacY. A binary pseudophase diagram of POPE : POPG built from AFM observations enables to calculate the composition of the fluid phase where LacY is inserted. These results are consistent with a model where POPE constitutes the main component of the lipid-LacY interface segregated from the fluid bulk phase where POPG predominates.

Modeling FRET to investigate the selectivity of lactose permease of Escherichia coli for lipids.

Förster resonance energy transfer (FRET) is a photophysical process by which a donor (D) molecule in an electronic excited state transfers its excitation energy to a second species, the acceptor (A). Since FRET efficiency depends on D-A separation, the measurement of donor fluorescence in presence and absence of the acceptor allows determination of this distance, and therefore FRET has been extensively used as a "spectroscopic ruler". In membranes, interpretation of FRET is more complex, since one D may be surrounded by many A molecules. Such is the case encountered with membrane proteins and lipids in the bilayer. This paper reviews the application of a model built to analyze FRET data between a single tryptophan mutant of the transmembrane protein lactose permease (W151/C154G of LacY), the sugar/H(+) symporter from Escherichia coli, and different pyrene-labeled phospholipids. Several variables of the system with biological implication have been investigated: The selectivity of LacY for different species of phospholipids, the enhancement of the sensitivity of the FRET modeling, and the mutation of a particular aminoacid (D68C) of the protein. The results obtained support: (i) Preference of LacY for phosphatidylethanolamine (PE) over phosphatidylglycerol (PG); (ii) affinity of LacY for fluid (L(α)) phases; and (iii) importance of the aspartic acid in position 68 in the sequence of LacY regarding the interaction with the phospholipid environment. Besides, by exploring the enhancement of the sensitivity by using pure lipid matrices with higher mole fractions of labelled-phospholipid, the dependence on acyl chain composition is unveiled.

Effect of lactose permease presence on the structure and nanomechanics of two-component supported lipid bilayers.

In this paper we present a comparative study of supported lipid bilayers (SLBs) and proteolipid sheets (PLSs) obtained from deposition of lactose permease (LacY) of Escherichia coli proteoliposomes in plane. Lipid matrices of two components, phosphatidylethanolamine (PE) and phosphatidylglycerol (PG), at a 3:1, mol/mol ratio, were selected to mimic the inner membrane of the bacteria. The aim was to investigate how species of different compactness and stiffness affect the integration, distribution and nanomechanical properties of LacY in mixtures of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) or 1,2-palmitoyl-sn-glycero-3-phosphoethanolamine (DPPE) with 1-palmitoyl-2-oleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (POPG). Both compositions displayed phase separation and were investigated by atomic force microscopy (AFM) imaging and force-spectroscopy (FS) mode. PLSs displayed two separated, segregated domains with different features that were characterised by FS and force-volume mode. We correlated the nanomechanical characteristics of solid-like gel phase (Lß) and fluid liquid-crystalline phase (Lα) with phases emerging in presence of LacY. We observed that for both compositions, the extended PLSs showed a Lß apparently formed only by lipids, whilst the second domain was enriched in LacY. The influence of the lipid environment on LacY organisation was studied by performing protein unfolding experiments using the AFM tip. Although the pulling experiments were unspecific, positive events were obtained, indicating the influence of the lipid environment when pulling the protein. A possible influence of the lateral surface pressure on this behaviour is suggested by the higher force required to pull LacY from DPPE:POPG than from POPE:POPG matrices. This is related to higher forces governing protein-lipid interaction in presence of DPPE.

Molecular study of quinolone resistance mechanisms and clonal relationship of Salmonella enterica clinical isolates.

In the last few years, the number of Salmonella enterica strains resistant to nalidixic acid has steadily increased. In a previous study, the quinolone susceptibility phenotype and genotype of 38 S. enterica clinical isolates (19 S. enterica serovar Typhimurium and 19 S. enterica serovar Enteritidis) were determined. Forty-two percent of the isolates showed nalidixic acid resistance associated with a mutation in gyrA together with putative overexpression of efflux pump(s). In this study, mutations in the quinolone resistance-determining region (QRDR) of parE and the regulators of AcrAB (acrR, marRAB, soxRS and ramR) were analysed. Intracellular accumulation of ciprofloxacin and nalidixic acid was determined. Gene expression of the efflux pump components acrB, tolC, acrF and emrB was also assessed. In addition, an epidemiological study of the isolates by multilocus sequence typing (MLST) and pulsed-field gel electrophoresis (PFGE) was performed. No mutations were detected in parE, whereas two amino acid substitutions were found in two susceptible strains in MarR (I84L) and AcrR (N214T) in one strain each, although both were suggested to be polymorphisms. No changes in the gene expression of acrB, tolC, acrF and emrB were detected between nalidixic-acid-resistant and -susceptible strains. Intracellular accumulation was not useful to reveal differences. Epidemiological analysis showed an important clonal relatedness among the S. Enteritidis isolates, whereas major divergence was seen for S. Typhimurium. Altogether, these results suggest the presence of previously undiscovered drug efflux pump(s) and confirm the high clonality of S. Enteritidis and the genetic divergence of S. Typhimurium.

Improving ex vivo skin permeation of non-steroidal anti-inflammatory drugs: enhancing extemporaneous transformation of liposomes into planar lipid bilayers.

Transdermal delivery of active principles is a versatile method widely used in medicine. The main drawback for the transdermal route, however, is the low efficiency achieved in the absorption of many drugs, mostly due to the complexity of the skin barrier. To improve drug delivery through the skin, we prepared and characterized liposomes loaded with ibuprofen and designed pharmaceutical formulations based on the extemporaneous addition of penetration enhancer (PE) surfactants. Afterwards, permeation and release studies were carried out. According to the permeation studies, the ibuprofen liposomal formulation supplemented with PEs exhibited similar therapeutic effects, but at lower doses (20%) comparing with a commercial formulation used as a reference. Atomic force microscopy (AFM) was used to investigate the effect caused by PEs on the adsorption mechanism of liposomal formulations onto the skin. Non-fused liposomes, bilayers and multilayered lipid structures were observed. The transformation of vesicles into planar structures is proposed as a possible rationale for explaining the lower doses required when a liposome formulation is supplemented with surfactant PEs.

Phospholipid-lactose permease interaction as reported by a head-labeled pyrene phosphatidylethanolamine: a FRET study.

Förster resonance energy transfer (FRET) measurements were performed in preceding works to study the selectivity between a single-tryptophan mutant of lactose permease (LacY) of Escherichia coli (used as the donor) and phospholipid probes labeled with pyrene at the acyl chain moiety (used as the acceptor). In the present work, we report the results obtained by using the same LacY mutant (W151/C154G) and binary lipid mixtures of phosphatidylethanolamine (PE) differing in the acyl chain composition and 1-palmitoyl-2-oleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (POPG) (3:1 mol/mol) doped with a phospholipid probe labeled with pyrene at the headgroup. The use of 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine-N-(1-pyrenesulfonyl) ammonium salt (HPyr-PE), which bears two unsaturated acyl chains, enabled the investigation of the specific interaction between LacY and HPyr-PE. The main conclusions raised from our results suggest that (i) for phase-separated systems, LacY would be located in fluid domains nominally enriched in POPG, and if a given proportion of PE is present in this phase, it will be mainly located around LacY; and (ii) in the absence of phase separation, LacY is preferentially surrounded by PE and, in particular, seems to be sensitive to the lipid spontaneous curvature.

Atomic force microscopy: a versatile tool to probe the physical and chemical properties of supported membranes at the nanoscale.

Atomic force microscopy (AFM) was developed in the 1980s following the invention of its precursor, scanning tunneling microscopy (STM), earlier in the decade. Several modes of operation have evolved, demonstrating the extreme versatility of this method for measuring the physicochemical properties of samples at the nanoscopic scale. AFM has proved an invaluable technique for visualizing the topographic characteristics of phospholipid monolayers and bilayers, such as roughness, height or laterally segregated domains. Implemented modes such as phase imaging have also provided criteria for discriminating the viscoelastic properties of different supported lipid bilayer (SLB) regions. In this review, we focus on the AFM force spectroscopy (FS) mode, which enables determination of the nanomechanical properties of membrane models. The interpretation of force curves is presented, together with newly emerging techniques that provide complementary information on physicochemical properties that may contribute to our understanding of the structure and function of biomembranes. Since AFM is an imaging technique, some basic indications on how real-time AFM imaging is evolving are also presented at the end of this paper.

Phosphatidylethanolamine-lactose permease interaction: a comparative study based on FRET.

In this work we have investigated the selectivity of lactose permease (LacY) of Escherichia coli (E. coli) for its surrounding phospholipids when reconstituted in binary mixtures of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE), 1,2-Palmitoyl-sn-glycero-3-phosphoethanolamine (DPPE), or 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) with 1-palmitoyl-2-oleoyl-sn-glycero-3-(phospho-rac-(1-glycerol)) (POPG). Förster resonance energy transfer (FRET) measurements have been performed to investigate the selectivity between a single tryptophan mutant of LacY used as donor (D), and two analogues of POPE and POPG labeled with pyrene in the acyl chains (Pyr-PE and Pyr-PG) used as acceptors. As a difference from previous works, now the donor has been single-W151/C154G/D68C LacY. It has been reported that the replacement of the aspartic acid in position 68 by cysteine inhibits active transport in LacY. The objectives of this work were to elucidate the phospholipid composition of the annular region of this mutant and to determine whether the mutation performed, D68C, induced changes in the protein-lipid selectivity. FRET efficiencies for Pyr-PE were always higher than for Pyr-PG. The values of the probability of each site in the annular ring being occupied by a label (µ) were similar at the studied temperatures (24 °C and 37 °C), suggesting that the lipid environment is not significantly affected when increasing the temperature. By comparing the results with those obtained for single-W151/C154G LacY, we observe that the mutation in the 68 residue indeed changes the selectivity of the protein for the phospholipids. This might be probably due to a change in the conformational dynamics of LacY.

Membrane protein-lipid selectivity: enhancing sensitivity for modeling FRET data.

Förster resonance energy transfer (FRET) is a powerful method for the characterization of membrane proteins lipid selectivity. FRET can be used to quantify distances between a single donor and a single acceptor molecule; however, for FRET donors and acceptors scattered in the bilayer plane, multiple donor-acceptor pairs and distances are present. In addition, when studying protein/lipid selectivity, for a single tryptophan used as a donor; several lipid acceptors may be located at the boundary region (annular lipids) of the protein. Therefore, in these experiments, a theoretical analysis based on binomial distribution of multiple acceptors around the membrane proteins is required. In this work, we performed FRET measurements between single tryptophan lactose permease (W151/C154G LacY) of Escherichia coli and pyrene-labeled phospholipids (Pyr-PE, Pyr-PG, and Pyr-PC) reconstituted in palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine, 1-palmitoyl-2-oleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (sodium salt), 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-choline, and 1,2-dioleoyl-sn-glycero-3-phospho-choline at 25 and 37 °C. To increase the sensitivity of the method and to ascertain the lipid selectivity for LacY, we reconstituted the protein in the pure phospholipids doped with 1.5% of labeled phospholipids. From fitting the theoretical model to the experimental FRET efficiencies, two parameters were calculated: the probability of a site in the annular ring being occupied by a labeled pyrene phospholipid and the relative association constant between the labeled and unlabeled phospholipids. The experimental FRET efficiencies have been interpreted taking into account the particular folding of the protein in each phospholipid matrix. Additional information on the annular lipid composition for each system has been obtained by exciting W151/C154G LacY and monitoring the emission intensities for monomer and excimer of the pyrene spectra. The results obtained indicate a higher selectivity of LacY for PE over PG and PC and pointed to a definite role of the acyl chains in the overall phospholipid-protein interaction.