Imaging of Antiferroelectric Dark Modes in an Inverted Plasmonic Lattice.

Plasmonic lattice nanostructures are of technological interest because of their capacity to manipulate light below the diffraction limit. Here, we present a detailed study of dark and bright modes in the visible and near-infrared energy regime of an inverted plasmonic honeycomb lattice by a combination of Au+ focused ion beam lithography with nanometric resolution, optical and electron spectroscopy, and finite-difference time-domain simulations. The lattice consists of slits carved in a gold thin film, exhibiting hotspots and a set of bright and dark modes. We proposed that some of the dark modes detected by electron energy-loss spectroscopy are caused by antiferroelectric arrangements of the slit polarizations with two times the size of the hexagonal unit cell. The plasmonic resonances take place within the 0.5-2 eV energy range, indicating that they could be suitable for a synergistic coupling with excitons in two-dimensional transition metal dichalcogenides materials or for designing nanoscale sensing platforms based on near-field enhancement over a metallic surface.

An Inverted Honeycomb Plasmonic Lattice as an Efficient Refractive Index Sensor.

We present an efficient refractive index sensor consisting of a heterostructure that contains an Au inverted honeycomb lattice as a main sensing element. Our design aims at maximizing the out-of-plane near-field distributions of the collective modes of the lattice mapping the sensor surroundings. These modes are further enhanced by a patterned SiO2 layer with the same inverted honeycomb lattice, an SiO2 spacer, and an Au mirror underneath the Au sensing layer that contribute to achieving a high performance. The optical response of the heterostructure was studied by numerical simulation. The results corresponding to one of the collective modes showed high sensitivity values ranging from 99 to 395 nm/RIU for relatively thin layers of test materials within 50 and 200 nm. In addition, the figure of merit of the sensor detecting slight changes of the refractive index of a water medium at a fixed wavelength was as high as 199 RIU-1. As an experimental proof of concept, the heterostructure was manufactured by a simple method based on electron beam lithography and the measured optical response reproduces the simulations. This work paves the way for improving both the sensitivity of plasmonic sensors and the signal of some enhanced surface spectroscopies.

Geometric frustration in a hexagonal lattice of plasmonic nanoelements.

We introduce the concept of geometric frustration in plasmonic arrays of nanoelements. In particular, we present the case of a hexagonal lattice of Au nanoasterisks arranged so that the gaps between neighboring elements are small and lead to a strong near-field dipolar coupling. Besides, far-field interactions yield higher-order collective modes around the visible region that follow the translational symmetry of the lattice. However, dipolar excitations of the gaps in the hexagonal array are geometrically frustrated for interactions beyond nearest neighbors, yielding the destabilization of the low energy modes in the near infrared. This in turn results in a slow dynamics of the optical response and a complex interplay between localized and collective modes, a behavior that shares features with geometrically frustrated magnetic systems.

Self-oriented Ag-based polycrystalline cubic nanostructures through polymer stabilization.

This paper presents the study of the dynamics of the formation of polymer-assisted highly-orientated polycrystalline cubic structures (CS) by a fractal-mediated mechanism. This mechanism involves the formation of seed Ag@Co nanoparticles by InterMatrix Synthesis and subsequent overgrowth after incubation at a low temperature in chloride and phosphate solutions. These ions promote the dissolution and recrystallization in an ordered configuration of pre-synthetized nanoparticles initially embedded in negatively-charged polymeric matrices. During recrystallization, silver ions aggregate in AgCl@Co fractal-like structures, then evolve into regular polycrystalline solid nanostructures (e.g. CS) in a single crystallization step on specific regions of the ion exchange resin (IER) which maintain the integrity of polycrystalline nanocubes. Here, we study the essential role of the IER in the formation of these CS for the maintenance of their integrity and stability. Thus, this synthesis protocol may be easily expanded to the composition of other nanoparticles providing an interesting, cheap and simple alternative for cubic structure formation and isolation.

Confinement of water droplets on rectangular micro/nano-arrayed surfaces.

Micro-patterned surfaces with alternate hydrophilic and hydrophobic rectangular areas effectively confine water droplets down to attolitre volumes. The contact angle, volume, and geometry of the confined droplets as a function of the geometry and physico-chemical properties of the confining surfaces have been determined by phenomenological simulations, validated by atomic force microscopy measurements. The combination between experiments and simulations can be used for the purposeful design of arrays with surface-addressable hydrophobicity employed in digital microfluidics and high-throughput screening nanoarrays.

Nanoparticles with tunable shape and composition fabricated by nanoimprint lithography.

Cone-like and empty cup-shaped nanoparticles of noble metals have been demonstrated to provide extraordinary optical properties for use as optical nanoanntenas or nanoresonators. However, their large-scale production is difficult via standard nanofabrication methods. We present a fabrication approach to achieve arrays of nanoparticles with tunable shape and composition by a combination of nanoimprint lithography, hard-mask definition and various forms of metal deposition. In particular, we have obtained arrays of empty cup-shaped Au nanoparticles showing an optical response with distinguishable features associated with the excitations of localized surface plasmons. Finally, this route avoids the most common drawbacks found in the fabrication of nanoparticles by conventional top-down methods, such as aspect ratio limitation, blurring, and low throughput, and it can be used to fabricate nanoparticles with heterogeneous composition.

Real time protein recognition in a liquid-gated carbon nanotube field-effect transistor modified with aptamers.

The combination of optimized and passivated Field Effect Transistors (FETs) based on carbon nanotubes (CNTs) together with the appropriate choice and immobilization strategy of aptamer receptors and buffer concentration have allowed the highly sensitive and real time biorecognition of proteins in a liquid-gated configuration. Specifically we have followed the biorecognition process of thrombin by its specific aptamer. The aptamer modified device is sensitive enough to capture a change in the electronic detection mechanism, one operating at low protein concentrations and the other in a higher target concentration range. The high sensitivity of the device is also sustained by the very low detection limits achieved (20 pM) and their high selectivity when other target proteins are used. Moreover, the experimental results have allowed us to quantify the equilibrium constant of the protein-aptamer binding and confirm its high affinity by using the Langmuir equation.

Biomolecule patterning on analytical devices: a microfabrication-compatible approach.

The present work describes a methodology for patterning biomolecules on silicon-based analytical devices that reconciles 3-D biological functionalization with standard resist lift-off techniques. Unlike classic sol-gel approaches in which the biomolecule of interest is introduced within the sol mixture, a two-stage scenario has been developed. It consists first of patterning micrometer/submicrometer polycondensate scaffold structures, using classic microfabrication tools, that are then loaded with native biomolecules via a second simple incubation step under biologically friendly environmental conditions. The common compatibility issue between the biological and microfabrication worlds has been circumvented because native recognition biomolecules can be introduced into the host scaffold downstream from all compatibility issues. The scaffold can be generated on any silicon substrate via the polycondensation of aminosilane, namely, aminopropyltriethoxy silane (APTES), under conditions that are fully compatible with resist mask lithography. The scaffold porosity and high primary amine content allow proteins and nucleic acid sequences to penetrate the polycondensate and to interact strongly, thus giving rise to micrometer/submicrometer 3-D structures exhibiting high biological activity. The integration of such a biopatterning approach in the microfabrication process of silicon analytical devices has been demonstrated via the successful completion of immunoassays and nucleic acid assays.