Towards integrated sustainable biofuel and chemical production: An application of banana pseudostem ash in the production of biodiesel and recovery of lignin from bamboo leaves.

This study investigated an integrated approach to the biowaste transformation and valorization of byproducts. Biochar obtained from the banana pseudostem was calcined to synthesize a heterogeneous catalyst and sustainably prepare a highly alkaline solution. The ash was utilized directly as a heterogeneous catalyst in biodiesel production from waste cooking oil. At the same time, an alkaline solution prepared from the ash was used for delignification and recovery of lignin from bamboo leaves by the hydrothermal reaction. Techniques like Fourier-transform infrared spectroscopy (FTIR), Field emission scanning electron microscopy (FESEM), Brunauer-Emmett-Teller (BET), Transmission electron microscopy (TEM), and Energy dispersive X-ray (EDX) were applied to characterized the catalyst. The alkaline solution was analyzed with Atomic absorption spectroscopy (AAS). The Response surface methodology (RSM) technique was considered for the optimization of different parameters in the transesterification and hydrothermal reaction. Under the optimized condition, waste cooking oil (WCO) to Fatty acid methyl ester (FAME) conversion was 97.56 ± 0.11%, and lignin recovery was 43.20 ± 0.45%. While at the best operating pyrolysis temperature, the liquid fraction yield from the banana pseudostem (500 °C) was 38.10 ± 0.31 wt%. This integrated study approach encourages the inexpensive, sustainable, and environment-friendly pathway for synthesizing catalysts and preparing a highly alkaline solution for the valorization of biowaste into biofuel and biochemicals.

Prodigiosin-Loaded Poly(lactic acid) to Combat the Biofilm-Associated Infections.

Poly(lactic acid) (PLA) is an emerging biobased implant material. Despite its biocompatibility and the aseptic procedures followed during orthopedic surgery, bacterial infection remains an obstacle to implementing PLA-based implants. To tackle this issue, prodigiosin-incorporated PLA has been developed, which possesses improved hydrophobicity with a contact angle of 111 ± 1.5°. The degradation temperature of the prodigiosin is 215 °C, which is more than the melting temperature of PLA, which supports the processability and sterilization of the PLA-based implants without any toxic gases. Further, prodigiosin improves the transparency of PLA and acts as a nucleation site. The spherulite density increases three times compared to that of neat PLA. The inherent methoxy group of prodigiosin is an active site responsible for the inhibition of bacterial attack and biofilm formation. The in vitro study on biofilm formation shows excellent inhibition activity against implant-associated pathogens such as Klebsiella aerogenes and Staphylococcus aureus.