Concentric-mineralized hybrid silk-based scaffolds for bone tissue engineering in vitro models.

There are many challenges in the development of 3D-tissue models for studying bone physiology and disease. Silk fibroin (SF), a natural fibrous protein used in biomedical applications has been studied for bone tissue engineering (TE) due to its mechanical properties, biocompatibility and biodegradability. However, low osteogenic capacity as well as the necessity to reinforce the protein mechanically for some orthopedic applications prompts the need for further designs for SF-based materials for TE bone. Concentric mineralized porous SF-based scaffolds were developed to improve mechanics and mineralization towards osteoregeneration. Hybrid SF silica microparticles (MP) or calcium carbonate nano-structured microparticles (NMP) were seeded with hMSCs co-cultured under osteogenic and osteoclastic conditions with THP-1 human monocytes up to 10 weeks to simulate and recapitulate bone regeneration. Scaffolds with appropriate pore size for cell infiltration, resulted in improved compressive strength, increased cell attachment and higher levels of expression of osteogenic markers and mineralization after adding the NMPs, compared to controls systems without these particles. These hybrid SF-based 3D-structures can provide improved scaffold designs for in vitro bone TE.

Nanodevices for the immobilization of therapeutic enzymes.

Therapeutic enzymes are one of the most promising applications of this century in the field of pharmaceutics. Biocatalyst properties can be improved by enzyme immobilization on nano-objects, thereby increasing stability and reusability and also enhancing the targeting to specific tissues and cells. Therapeutic biocatalyst-nanodevice complexes will provide new tools for the diagnosis and treatment of old and newly emerging pathologies. Among the advantages of this approach are the wide span and diverse range of possible materials and biocatalysts that promise to make the matrix-enzyme combination a unique modality for therapeutic delivery. This review focuses on the most significant techniques and nanomaterials used for enzyme immobilization such as metallic superparamagnetic, silica, and polymeric and single-enzyme nanoparticles. Finally, a review of the application of these nanodevices to different pathologies and modes of administration is presented. In short, since therapeutic enzymes constitute a highly promising alternative for treating a variety of pathologies more effectively, this review is aimed at providing the comprehensive summary needed to understand and improve this burgeoning area.

Synthesis and characterization of CaCO3-biopolymer hybrid nanoporous microparticles for controlled release of doxorubicin.

Doxorubicin (Dox) is a hydrophilic drug extensively used for treatment of breast, lung, and ovarian cancer, among others; it is highly toxic and can cause serious side effects on nontargeted tissues. We developed and studied a hybrid nanoporous microparticle (hNP) carrier based on calcium carbonate and biopolymers derivatized with folic acid (FA) and containing Dox as a chemotherapeutic drug model. The hNPs were characterized by X-ray diffraction, and Raman and Fourier transform infrared (FTIR) spectroscopies. The X-ray diffraction patterns of calcium carbonate particles showed about 30-70% vaterite-calcite polymorphisms and up to 95% vaterite, depending on the absence or the presence of biopolymers as well as their type. Scanning electron microcopy images revealed that all types of hNPs were approximately spherical and porous with average diameter 1-5 µm, and smaller than CaCO3 microparticles. The presence of biopolymers in the matrices was confirmed after derivatization with a fluorescein isothiocyanate probe by means of confocal microscopy and FTIR synchrotron beamline analysis. In addition, the coupling of lambda carrageenan (λ-Car) to FA in the microparticles (FA-λ-Car-hNPs) increased the cancer-cell targeting and also extended the specific surface area by up to ninefold (26.6 m2 g(-1)), as determined by the Brunauer-Emmett-Teller isotherm. A nanostructured porous surface was found in all instances, and the FA-λ-Car-hNP pore size was about 30 nm, as calculated by means of the Barrett-Joyner-Halenda adsorption average. The test of FA-λ-Car-hNP anticancer activity on human osteosarcoma MG-63 cell line showed cell viabilities of 13% and 100% with and without Dox, respectively, as determined by crystal violet staining after 24 h of incubation.

Tailoring doxorubicin sustainable release from biopolymeric smart matrix using congo red as molecular helper.

Doxorubicin (Dox) was co-encapsulated with congo red (CR) in order to increase drug encapsulation and sustain the release from gel microbeads composed of alginate-carboxy methyl guar gum (68/32) for oral controlled delivery. No release of either cargo molecule from the microbeads at pH 1.2 within 90 minutes was detected. However, 62% CR and 16% Dox were released from the gels at pH 7.4 at 37 °C in 8 hours when both the cargo molecules were studied alone. Presence of CR in the formulation reduces the release of Dox by about 25-30% under the same experimental conditions. Rheological properties of the formulations have been investigated at different temperatures between 20 and 37 °C. Shear thinning behavior was observed by steady-shear flow experiments for all formulations, and no yield stress was observed for any of the formulations. The temperature effect on Alg-CMGG-Dox-CR evidenced a synergic action between Dox and CR. Dynamic frequency sweep tests were performed to study the viscoelastic properties of the formulations. The patterns observed for Alg-CMGG indicated physical gel characteristics; however, all other formulations showed behaviour typical of concentrated solutions. These results confirm the interaction of Dox and CR, and the concomitant positive effect on sustainable release in oral delivery.

Alginate lyase and ciprofloxacin co-immobilization on biopolymeric microspheres for cystic fibrosis treatment.

A new formulation is described based on biopolymeric microspheres containing alginate lyase (AL) and ciprofloxacin (Cip) for sustainable oral delivery in CF patients. Alginate (ALG) and high-methoxyl pectin (HMP) are selected as the biopolymers to develop a composite matrix. ALG microspheres coated with HMP and ALG-HMP blend are gelled in water/organic solvents mixtures, obtaining Cip encapsulations from 46.0 to 100.0%. ALG-HMP shows a Cip sustainable release profile and is able to encapsulate 90.0% of AL, showing 76.0% enzyme activity after release under simulated intestinal conditions. The developed system is a promising delivery carrier to treat chronic infection of Pseudomonas aeruginosa and to reduce the viscoelasticity of the mucus accumulated into intestine of CF patients.

Binding and encapsulation of doxorubicin on smart pectin hydrogels for oral delivery.

Pectins (Pec) of 33 to 74 % esterification degree were tested with doxorubicin (Dox), a very high toxic drug widely used in cancer therapies. Pec with 35 and 55 % DE were selected because of the Dox binding higher than Pec microspheres of 35 and 55 % obtained by ionotropic gelation with Ca⁺² have 88 and 66 % Dox loading capacity. Kinetic Dox release showed more than 80.0 and about 30.0 % free drug from 35 % and 55 % Pec formulations at pH 7.4, and 37 °C after 1-h incubation, respectively. Besides, Dox release decrease to 12 % in 55 % Pec microsphere formulation after 1-year storage at 4 °C. FTIR analysis of Pec-Dox complex showed hipsochromic shifts for the σ(C=O), δ(N-H) and σ(C-C) vibrational modes compared to Dox spectrum suggesting strong interaction between the drug cargo and the matrix. Rheological studies of Pec and Pec-Dox samples flow behavior exhibited a shear-thinning nature. Fifty-five percent of Pec showed higher viscosity than the viscosity for 35 % Pec in all range of temperatures analyzed, and decreased when the temperature is raised. Besides, Pec-Dox complexes have higher viscosity values than those of the corresponding Pec samples, and viscosity curves as function of shear rate for 35 % Pec-Dox are above the curves of 55 % Pec-Dox. In both cases, the results are confirming significant interaction between the cargo and the matrix, which also was established in viscoelastic dynamic analysis.