Visualization of Nanocrystallites in Organic Semiconducting Blends Using Cryo-Electron Microscopy.

The efficiency of an organic solar cell is highly dependent on the complex, interpenetrating morphology, and molecular order within the composite phases of the bulk heterojunction (BHJ) blend. Both these microstructural aspects are strongly influenced by the processing conditions and chemical design of donor/acceptor materials. To establish improved structure-function relationships, it is vital to visualize the local microstructural order to provide specific local information about donor/acceptor interfaces and crystalline texture in BHJ blend films. The visualization of nanocrystallites, however, is difficult due to the complex semi-crystalline structure with few characterization techniques capable of visualizing the molecular ordering of soft materials at the nanoscale. Here, it is demonstrated how cryo-electron microscopy can be utilized to visualize local nanoscale order. This method is used to understand the distribution/orientation of crystallites in a BHJ blend. Long-range (>300 nm) texturing of IEICO-4F crystallites oriented in an edge-on fashion is observed, which has not previously been observed for spin-coated materials. This approach provides a wealth of quantitative information about the texture and size of nanocrystallites, which can be utilized to understand charge generation and transport in organic film. This study guides tailoring the material design and processing conditions for high-performance organic optoelectronic devices.

Probing Charge Transfer Character in Modern Donor/Acceptor Materials via Electroabsorption Spectroscopy.

We use electroabsorption (EA) spectroscopy to probe the charge transfer (CT) character in neat films and blends of donors and acceptors of interest for organic electronic applications. In particular, we compare the CT character in two polymer donor and non-fullerene acceptor blends, including 3,9-bis(2-methylene-((3-(1,1-dicyanomethylene)-6,7-difluoro)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']dithiophene (IT-4F) and 2,2'-((2Z,2'Z)-((12,13-bis(2-ethylhexyl)-3,9-diundecyl-12,13-dihydro-[1,2,5]thiadiazolo[3,4-e]thieno[2″,3″:4',5']thieno[2',3':4,5]pyrrolo[3,2-g]thieno[2',3':4,5]thieno[3,2-b]indole-2,10-diyl)bis(methanylylidene))bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile (Y6). Like classic polymer/fullerene blends, the blend based on IT-4F exhibits primarily first derivative-like EA features, suggesting localized exciton formation upon photoexcitation. However, the Y6-based blend has an EA spectrum that is dominated by second derivative-like features, consistent with CT character. We show that this signal originates primarily from Y6. We find that Y6 exhibits the highest dipole moment change (7.5 ± 2.5 D) of the molecules that comprise this study, consistent with a high degree of the CT character, and a relatively large polarization volume of 361 ± 70 Å3, consistent with strong electron delocalization. These results point to the origins of exceptional performance of organic photovoltaics (OPVs) based on Y6.

Over 31% efficient indoor organic photovoltaics enabled by simultaneously reduced trap-assisted recombination and non-radiative recombination voltage loss.

Indoor organic photovoltaics (OPVs) have shown great potential application in driving low-energy-consumption electronics for the Internet of Things. There is still great room for further improving the power conversion efficiency (PCE) of indoor OPVs, considering that the desired morphology of the active layer to reduce trap-assisted recombination and voltage losses and thus simultaneously enhance the fill factor (FF) and open-circuit voltage for efficient indoor OPVs remains obscure. Herein, by optimizing the bulk and interface morphology via a layer-by-layer (LBL) processing strategy, low leakage current and low non-radiative recombination loss can be synergistically achieved in PM6:Y6-O based devices. Detailed characterizations reveal the stronger crystallinity, purer domains and ideal interfacial contacts in the LBL devices compared to their bulk-heterojunction (BHJ) counterparts. The optimized morphology yields a reduced voltage loss and an impressive FF of 81.5%, and thus contributes to a high PCE of 31.2% under a 1000 lux light-emitting diode (LED) illumination in the LBL devices, which is the best reported efficiency for indoor OPVs. Additionally, this LBL strategy exhibits great universality in promoting the performance of indoor OPVs, as exemplified by three other non-fullerene acceptor systems. This work provides guidelines for morphology optimization and synergistically promotes the fast development of efficient indoor OPVs.

Negative Correlation between Intermolecular vs Intramolecular Disorder in Bulk-Heterojunction Organic Solar Cells.

By varying the concentration of a solvent additive, we demonstrate the modulation of intermolecular (donor/acceptor (D/A) interface) and intramolecular (bulk) disorder in blends of the low-band gap polymer poly[2,6-(4,4-bis(2-ethylhexyl)-4 H-cyclopental[2,1- b;3,4- b']-dithiophene)- alt-4,7-(2,1,3-benzothiadiazole)] (PCPDTBT) blended with [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM). Using the solvent additive concentration of 1,8-diiodooctane (DIO) in the host-processing solvent, the disorder in the bulk and at the interface is studied in terms of Urbach energy, electroluminescence (EL) broadening, and EL quantum efficiency (ELQE). The Urbach energy varies from 80 to 39 meV for bulk and 39 to 51 meV for D/A interface. An interesting feature is that changes in the Urbach energy of the D/A interface are opposite to those of the Urbach energy of bulk; i.e., the disorder at the D/A interface increases as the disorder in the bulk decreases with increase in DIO concentration. Our study evidently suggested a negative correlation between intermolecular and intramolecular property in a bulk-heterojunction solar cell. Furthermore, scanning photocurrent microscopy measurements show that the effective hole transport length is double in magnitude for cells processed from 3 vol % DIO in comparison to that in cells processed from 0 vol %. This increase in effective hole transport length is explained by an increase in the delocalization of the electronic states involved in charge transport, as confirmed by dark J- V knee voltage,  JSC and EU-bulk measurements. Henceforth, we provide a functional relationship between the additive-induced bulk-heterojunction morphology and the optoelectronic properties of PCPDTBT-based solar cells.