A potential lignocellulosic biomass based on banana waste for critical rare earths recovery from aqueous solutions.

Rare earth elements (REE) present multiple applications in technological devices but also drawbacks (scarcity and water contaminant). The current study aims to valorise the banana wastes - banana rachis (BR), banana pseudo-stem (BPS) and banana peel (BP) as sustainable adsorbent materials for the recovery of REE (Nd3+, Eu3+, Y3+, Dy3+ and Tb3+). The adsorbent materials were characterized using analytical techniques such as: Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, zeta potential and scanning electron microscopy with energy dispersive X-ray probe. The adsorption performance and mechanisms were studied by pH dependence, equilibrium isotherms, kinetics, thermodynamics, ion-exchange and desorption evaluation. The results show good adsorption capacities for the three materials, highlighting BR that presents ∼100 mg/g for most of the REE. The adsorption process (100 mg REE/L) reaches the 60% uptake in 8 min and the equilibrium within 50 min. On the other hand, the thermodynamic study indicates that the adsorption is spontaneous and exothermic (ΔH° < 40 kJ/mol). The adsorption mechanism is based on the presence of carboxylic groups that induce electrostatic interactions and facilitate the surface nucleation of REE microcrystals coupled to an ion exchange process as well as the presence of other oxygen containing groups that establish weak intermolecular forces. The recovery of REE from the adsorbent (∼97%) is achieved using EDTA as desorbing solution. This research indicates that banana waste and particularly BR is a new and promising renewable bioresource to recover REE with high adsorption capacity and moderated processing cost.

Synthesis of vegetable-oil based polymer by terpolymerization of epoxidized soybean oil, propylene oxide and carbon dioxide.

Although carbon dioxide (CO2) is well known as one of the major green-house gases, it is also an economical C1 resource. Thus, CO2 has been regarded as an appealing starting material for the synthesis of polymers, like polycarbonates by the reaction with epoxides. Herein the reaction between natural epoxidized soybean oil (ESO), propylene oxide (PO) and CO2 under high pressure (4.0MPa) with the presence of Co-Zn double metal cyanide (Co-Zn DMC) catalyst was studied. Temperature and reaction time were varied accordingly and the products obtained were characterized by FTIR, GPC and 1H NMR. The results obtained indicate the formation of polycarbonates in the samples collected with yields vary from 60 to 85%. The number average molecular weight (Mn) of the resultant polymer prepared at reaction temperature of 80°C and reaction time of 6h can reach up to 6498g/mol.

Low-molecular-weight poly(alpha-methyl beta,L-malate) of microbial origin: synthesis and crystallization.

Low-molecular-weight poly(alpha-methyl beta,L-malate) made of approximately 25-30 units was prepared from microbial poly(beta,L-malic acid) by treatment with diazomethane. The thermal characterization of the polymalate methyl ester was carried out and its crystalline structure was preliminary examined. Its ability to crystallize both from solution and from the melt was comparatively evaluated.