ABSTRACT
The measurement of the underwater radiated noise at a model scale is generally the preferred way to predict this important feature at sea, using scaling laws. The accuracy of such method depends on many parameters. The measurement accuracy in a test section of a cavitation depends on the model used for the transfer function or for the propagation model. Thus, the knowledge of the wall acoustic impedance appears as an important parameter in such studies. The proposed study presents a modal method dedicated to the estimate of the wall impedance of a cavitation tunnel test section. It is based on a reverse method to estimate the impedance from measurements assuming that the sensor locations are known.
ABSTRACT
The acoustic study of propellers in a hydrodynamic tunnel is of paramount importance during the design process, but can involve significant difficulties due to the boundary layer noise (BLN). Indeed, advanced denoising methods are needed to recover the acoustic signal in case of poor signal-to-noise ratio. The technique proposed in this paper is based on the decomposition of the wall-pressure cross-spectral matrix (CSM) by taking advantage of both the low-rank property of the acoustic CSM and the sparse property of the BLN CSM. Thus, the algorithm belongs to the class of robust principal component analysis (RPCA), which derives from the widely used principal component analysis. If the BLN is spatially decorrelated, the proposed RPCA algorithm can blindly recover the acoustical signals even for negative signal-to-noise ratio. Unfortunately, in a realistic case, acoustic signals recorded in a hydrodynamic tunnel show that the noise may be partially correlated. A prewhitening strategy is then considered in order to take into account the spatially coherent background noise. Numerical simulations and experimental results show an improvement in terms of BLN reduction in the large hydrodynamic tunnel. The effectiveness of the denoising method is also investigated in the context of acoustic source localization.
ABSTRACT
Digital in-line holography (DIH) with a divergent beam is used to measure size and concentration of cavitation bubbles (6-100 µm) in hydrodynamic facilities. A sampling probe is directly inserted in the cavitation tunnel, and the holograms of the bubbles are recorded through a transparent test section specially designed for DIH measurements. The recording beam coming from a fiber-coupled laser diode illuminates the sample volume, and holograms are recorded by a CMOS camera. From each hologram, the sampling volume can be reconstructed slice by slice by applying a wavelet-based reconstruction method. Because of the geometry of the recording beam, a magnification ratio must be introduced for recovering the 3D location and size of each bubble. The method used for processing holograms recorded in such a configuration is presented. Then, statistical results obtained from 5000 holograms recorded under different pressures in the cavitation tunnel are compared and discussed.