Critical Mineral Separations: Opportunities for Membrane Materials and Processes to Advance Sustainable Economies and Secure Supplies.

Sustainable energy solutions and electrification are driving increased demand for critical minerals. Unfortunately, current mineral processing techniques are resource intensive, use large quantities of hazardous chemicals, and occur at centralized facilities to realize economies of scale. These aspects of existing technologies are at odds with the sustainability goals driving increased demand for critical minerals. Here, we argue that the small footprint and modular nature of membrane technologies position them well to address declining concentrations in ores and brines, the variable feed concentrations encountered in recycling, and the environmental issues associated with current separation processes; thus, membrane technologies provide new sustainable pathways to strengthening resilient critical mineral supply chains. The success of creating circular economies hinges on overcoming diverse barriers across the molecular to infrastructure scales. As such, solving these challenges requires the convergence of research across disciplines rather than isolated innovations.

Conductive Glassy Nonconjugated Open-Shell Radical Polymer with Organosulfur Backbone for Macroscopic Conductivity.

Nonconjugated organic radicals with an open-shell radical active group exhibit unique functionality due to their radical pendant site. Compared with the previously studied doped conjugated polymers, radical polymers reveal superior processability, stability, and optical properties. Despite the success of organic radical polymer conductors based on the TEMPO radicals, it still requires potential design substitutions to meet the fundamental limits of charge transport in the radical polymer. To do so, we demonstrate that the amorphous, nonconjugated radical polymer with backbone-pendant group interaction and low glass transition temperature enables the macromolecules to have rapid charge transport in the solid state, resulting in conductivity higher than 32 S m-1. This charge transport is due to the formation of the local ordered regime with an energetically favored orientation caused by the strong coupling between the backbone and pendant group, which can significantly modulate the polymer packing with active electronic communications. The nonconjugate nature of the radical polymer maintains an optical transparency up to 98% at a 1.5 µm thick film. Thus, this effort will be a dramatically advanced model in the organic radical community for the creation of next-generation polymer conductors.

Large Room-Temperature Magnetoresistance in a High-Spin Donor-Acceptor Conjugated Polymer.

Open-shell conjugated polymers (CPs) offer new opportunities for the development of emerging technologies that utilize the spin degree of freedom. Their light-element composition, weak spin-orbit coupling, synthetic modularity, high chemical stability, and solution-processability offer attributes that are unavailable from other semiconducting materials. However, developing an understanding of how electronic structure correlates with emerging transport phenomena remains central to their application. Here, the first connections between molecular, electronic, and solid-state transport in a high-spin donor-acceptor CP, poly(4-(4-(3,5-didodecylbenzylidene)-4H-cyclopenta[2,1-b:3,4-b']dithiophen-2-yl)-6,7-dimethyl-[1,2,5]-thiadiazolo[3,4-g]quinoxaline), are provided. At low temperatures (T < 180 K), a giant negative magnetoresistance (MR) is achieved in a thin-film device with a value of -98% at 10 K, which surpasses the performance of all other organic materials. The thermal depopulation of the high-spin manifold and negative MR decrease as temperature increases and at T > 180 K, the MR becomes positive with a relatively large MR of 13.5% at room temperature. Variable temperature electron paramagnetic resonance spectroscopy and magnetic susceptibility measurements demonstrate that modulation of both the sign and magnitude of the MR correlates with the electronic and spin structure of the CP. These results indicate that donor-acceptor CPs with open-shell and high-spin ground states offer new opportunities for emerging spin-based applications.

Anomalous magnetoresistance in a nonconjugated radical polymer glass.

Macromolecules bearing open-shell entities offer unique transport properties for both electronic and spintronic devices. This work demonstrates that, unlike their conjugated polymer counterparts, the charge carriers in radical polymers (i.e., macromolecules with nonconjugated backbones and with stable open-shell sites present at their pendant groups) are singlet cations, which opens significant avenues for manipulating macromolecular design for advanced solid-state transport in these highly transparent conductors. Despite this key point, magnetoresistive effects are present in radical polymer thin films under applied magnetic fields due to the presence of impurity sites in low (i.e., <1%) concentrations. Additionally, thermal annealing of poly(4-glycidyloxy-2,2,6,6- tetramethylpiperidine-1-oxyl) (PTEO), a nonconjugated polymer with stable open-shell pendant groups, facilitated better electron exchange and pairwise spin interactions resulting in an unexpected magnetoresistance signal at relatively low field strengths (i.e., <2 T). The addition of 4-hydroxy-2,2,6,6-tetramethylpiperidin-N-oxy (TEMPO-OH), a paramagnetic species, increased the magnitude of the MR effect when the small molecule was added to the radical polymer matrix. These macroscopic experimental observables are explained using computational approaches that detail the fundamental molecular principles. This intrinsic localized charge transport behavior differs from the current state of the art regarding closed-shell conjugated macromolecules, and it opens an avenue towards next-generation transport in organic electronic materials.

Enhanced Electron Transport in Nonconjugated Radical Oligomers Occurs by Tunneling.

Incorporating temperature- and air-stable organic radical species into molecular designs is a potentially advantageous means of controlling the properties of electronic materials. However, we still lack a complete understanding of the structure-property relationships of organic radical species at the molecular level. In this work, the charge transport properties of (2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO) radical-containing nonconjugated molecules are studied using single-molecule charge transport experiments and molecular modeling. Importantly, the TEMPO pendant groups promote temperature-independent molecular charge transport in the tunneling region relative to the quenched and closed-shell phenyl pendant groups. Results from molecular modeling show that the TEMPO radicals interact with the gold metal electrodes near the interface to facilitate a high-conductance conformation. Overall, the large enhancement of charge transport by incorporation of open-shell species into a single nonconjugated molecular component opens exciting avenues for implementing molecular engineering in the development of next-generation electronic devices based on novel nonconjugated radical materials.

Bridging the Monomer to Polymer Gap in Radical Polymer Design.

Radical polymers bearing open-shell moieties at pendant sites exhibit unique redox and optoelectronic properties that are promising for many organic electronic applications. Nevertheless, gaps remain in relating the electronic properties of repeat units, which can be easily calculated, to the condensed-phase charge transport behaviors of these materials. To address this gap, we have performed the first quantum chemical study on a broad swathe of radical polymer design space that explicitly includes the coupling between polymer constraints and radical-mediated intramolecular charge transfer. For this purpose, a chemical space of 64 radical polymer chemistries was constructed based on varying backbone units, open-shell chemistries, and spacer units between the backbone and the radical groups. For each combination of backbone, radical, and spacer, comprehensive conformational sampling was used to calculate expected values of intrachain charge transport using several complementary metrics, including the end-to-end thermal Green's function, Delta-Wye transformed inverse resistance, and the Kirchhoff transport index. We observe that charge transport in radical polymers is primarily driven by the choice radical chemistry, which influences the optimal choice of backbone chemistry and spacer group that mediate radical alignment and avoid the formation of undesired trap states. Given the limited exploration of radical chemistries beyond the TEMPO radical for this class of materials, these findings suggest tremendous opportunities exist for synthetic exploration in radical polymers.

Tailoring Molecular-Scale Contact at the Perovskite/Polymeric Hole-Transporting Material Interface for Efficient Solar Cells.

Perovskite solar cells (PSCs) have delivered a power conversion efficiency (PCE) of more than 25% and incorporating polymers as hole-transporting layers (HTLs) can further enhance the stability of devices toward the goal of commercialization. Among the various polymeric hole-transporting materials, poly(triaryl amine) (PTAA) is one of the promising HTL candidates with good stability; however, the hydrophobicity of PTAA causes problematic interfacial contact with the perovskite, limiting the device performance. Using molecular side-chain engineering, a uniform 2D perovskite interlayer with conjugated ligands, between 3D perovskites and PTAA is successfully constructed. Further, employing conjugated ligands as cohesive elements, perovskite/PTAA interfacial adhesion is significantly improved. As a result, the thin and lateral extended 2D/3D heterostructure enables as-fabricated PTAA-based PSCs to achieve a PCE of 23.7%, improved from the 18% of reference devices. Owing to the increased ion-migration energy barrier and conformal 2D coating, unencapsulated devices with the new ligands exhibit both superior thermal stability under 60 °C heating and moisture stability in ambient conditions.

Smart soft contact lenses for continuous 24-hour monitoring of intraocular pressure in glaucoma care.

Continuous monitoring of intraocular pressure, particularly during sleep, remains a grand challenge in glaucoma care. Here we introduce a class of smart soft contact lenses, enabling the continuous 24-hour monitoring of intraocular pressure, even during sleep. Uniquely, the smart soft contact lenses are built upon various commercial brands of soft contact lenses without altering their intrinsic properties such as lens power, biocompatibility, softness, transparency, wettability, oxygen transmissibility, and overnight wearability. We show that the smart soft contact lenses can seamlessly fit across different corneal curvatures and thicknesses in human eyes and therefore accurately measure absolute intraocular pressure under ambulatory conditions. We perform a comprehensive set of in vivo evaluations in rabbit, dog, and human eyes from normal to hypertension to confirm the superior measurement accuracy, within-subject repeatability, and user comfort of the smart soft contact lenses beyond current wearable ocular tonometers. We envision that the smart soft contact lenses will be effective in glaucoma care.

Circularly Recyclable Polymers Featuring Topochemically Weakened Carbon-Carbon Bonds.

Closed-loop circular utilization of plastics is of manifold significance, yet energy-intensive and poorly selective scission of the ubiquitous carbon-carbon (C-C) bonds in contemporary commercial polymers pose tremendous challenges to envisioned recycling and upcycling scenarios. Here, we demonstrate a topochemical approach for creating elongated C-C bonds with a bond length of 1.57∼1.63 Å between repeating units in the solid state with decreased bond dissociation energies. Elongated bonds were introduced between the repeating units of 12 distinct polymers from three classes. In all cases, the materials exhibit rapid depolymerization via breakage of the elongated bond within a desirable temperature range (140∼260 °C) while otherwise remaining remarkably stable under harsh conditions. Furthermore, the topochemically prepared polymers are processable and 3D-printable while maintaining a high depolymerization yield and tunable mechanical properties. These results suggest that the crystalline polymers synthesized from simple photochemistry and without expensive catalysts are promising for practical applications with complete materials' circularity.

Radical Polymer-Based Organic Electrochemical Transistors.

Organic electrochemical transistors (OECTs) are an emerging platform for bioelectronic applications. Significant effort has been placed in designing advanced polymers that simultaneously transport both charge and ions (i.e., macromolecules that are mixed conductors). However, the considerations for mixed organic conductors are often different from the established principles that are well-known in the solid-state organic electronics field; thus, the discovery of new OECT macromolecular systems is highly desired. Here, we demonstrate a new materials system by blending a radical polymer (i.e., a macromolecule with a nonconjugated backbone and with stable open-shell sites at its pendant group) with a frequently used conjugated polymer. Specifically, poly(4-glycidyloxy-2,2,6,6-tetramethylpiperidine-1-oxyl) (PTEO) was blended with poly(3-hexylthiophene) (P3HT) to create thin films with distinct closed-shell and open-shell domains. Importantly, the sharp and unique oxidation-reduction (redox) potential associated with the radical moieties of the PTEO chain provided a distinct actuation feature to the blended films that modulated the ionic transport of the OECT devices. In turn, this led to controlled regulation of the doping of the P3HT phase in the composite film. By decoupling the ionic and electronic transport into two distinct phases and by using an ion transport phase with well-controlled redox activity, never-before-seen performance for a P3HT-based OECT was observed. That is, at loadings as low as 5% PTEO (by weight) OECTs achieved figure-of-merit (i.e., µC*) values >150 F V-1 cm-1 s-1, which place the performance on the same order as state-of-the-art conjugated polymers despite the relatively common conjugated macromolecular moiety implemented. As such, this effort presents a design platform by which to readily create a tailored OECT response through strategic macromolecular selection and polymer processing.

High-Spin (S = 1) Blatter-Based Diradical with Robust Stability and Electrical Conductivity.

Triplet ground-state organic molecules are of interest with respect to several emerging technologies but usually show limited stability, especially as thin films. We report an organic diradical, consisting of two Blatter radicals, that possesses a triplet ground state with a singlet-triplet energy gap, ΔEST ≈ 0.4-0.5 kcal mol-1 (2J/k ≈ 220-275 K). The diradical possesses robust thermal stability, with an onset of decomposition above 264 °C (TGA). In toluene/chloroform, glassy matrix, and fluid solution, an equilibrium between two conformations with ΔEST ≈ 0.4 kcal mol-1 and ΔEST ≈ -0.7 kcal mol-1 is observed, favoring the triplet ground state over the singlet ground-state conformation in the 110-330 K temperature range. The diradical with the triplet ground-state conformation is found exclusively in crystals and in a polystyrene matrix. The crystalline neutral diradical is a good electrical conductor with conductivity comparable to the thoroughly optimized bis(thiazolyl)-related monoradicals. This is surprising because the triplet ground state implies that the underlying π-system is cross-conjugated and thus is not compatible with either good conductance or electron delocalization. The diradical is evaporated under ultra-high vacuum to form thin films, which are stable in air for at least 18 h, as demonstrated by X-ray photoelectron and electron paramagnetic resonance (EPR) spectroscopies.

Electronic and Spintronic Open-Shell Macromolecules, Quo Vadis?

Open-shell macromolecules (i.e., polymers containing radical sites either along their backbones or at the pendant sites of repeat units) have attracted significant attention owing to their intriguing chemical and physical (e.g., redox, optoelectronic, and magnetic) properties, and they have been proposed and/or implemented in a wide range of potential applications (e.g., energy storage devices, electronic systems, and spintronic modules). These successes span multiple disciplines that range from advanced macromolecular chemistry through nanoscale structural characterization and on to next-generation solid-state physics and the associated devices. In turn, this has allowed different scientific communities to expand the palette of radical-containing polymers relatively quickly. However, critical gaps remain on many fronts, especially regarding the elucidation of key structure-property-function relationships that govern the underlying electrochemical, optoelectronic, and spin phenomena in these materials systems. Here, we highlight vital developments in the history of open-shell macromolecules to explain the current state of the art in the field. Moreover, we provide a critical review of the successes and bring forward open opportunities that, if solved, could propel this class of materials in a meaningful manner. Finally, we provide an outlook to address where it seems most likely that open-shell macromolecules will go in the coming years. Our considered view is that the future of radical-containing polymers is extremely bright and the addition of talented researchers with diverse skills to the field will allow these materials and their end-use devices to have a positive impact on the global science and technology enterprise in a relatively rapid manner.

Electronic and Magnetic Properties of a Three-Arm Nonconjugated Open-Shell Macromolecule.

Nonconjugated radical polymers (i.e., macromolecules with aliphatic backbones that have stable open-shell sites along their pendant groups) have arisen as an intriguing complement to π-conjugated polymers in organic electronic devices and may prove to have superior properties in magneto-responsive applications. To date, however, the design of nonconjugated radical polymers has primarily focused on linear homopolymer, copolymer, and block polymer motifs even though conjugated dendritic macromolecules (i.e., polyradicals) have shown significant promise in terms of their response under applied magnetic fields. Here, we address this gap in creating a nonconjugated, three-arm radical macromolecule with nitroxide open-shell sites using a straightforward, single-step reaction, and we evaluated the electronic and magnetic properties of this material using a combined computational and experimental approach. The synthetic approach employed resulted in a high-purity macromolecule with a well-defined molecular weight and narrow molecular weight distribution. Moreover, epoxide-based units were implemented in the three-arm radical macromolecule design, and this resulted in a nonlinear radical macromolecule with a low (i.e., below room temperature) glass transition temperature and one that was an amorphous material in the solid state. These properties allowed thin films of the three-arm radical macromolecule to have electrical conductivity values on par with many linear radical polymers previously reported, and our computational efforts suggest the potential of higher generation open-shell dendrimers to achieve advanced electronic and magnetic properties. Importantly, the three-arm radical macromolecule also demonstrated antiferromagnetic exchange coupling between spins at temperatures < 10 K. In this way, this effort puts forward key structure-property relationships in nonlinear radical macromolecules and presents a clear path for the creation of next-generation macromolecules of this type.

Rapid, continuous projection multi-photon 3D printing enabled by spatiotemporal focusing of femtosecond pulses.

There is demand for scaling up 3D printing throughput, especially for the multi-photon 3D printing process that provides sub-micrometer structuring capabilities required in diverse fields. In this work, high-speed projection multi-photon printing is combined with spatiotemporal focusing for fabrication of 3D structures in a rapid, layer-by-layer, and continuous manner. Spatiotemporal focusing confines printing to thin layers, thereby achieving print thicknesses on the micron and sub-micron scale. Through projection of dynamically varying patterns with no pause between patterns, a continuous fabrication process is established. A numerical model for computing spatiotemporal focusing and imaging is also presented which is verified by optical imaging and printing results. Complex 3D structures with smooth features are fabricated, with millimeter scale printing realized at a rate above 10-3 mm3 s-1. This method is further scalable, indicating its potential to make fabrications of 3D structures with micro/nanoscale features in a practical time scale a reality.

Thermoelectric Performance of Lead-Free Two-Dimensional Halide Perovskites Featuring Conjugated Ligands.

Sn-based halide perovskites are promising for thermoelectric (TE) device applications because of their high electrical conductivity as well as the low thermal conductivity associated with their soft lattices. However, conventional three-dimensional Sn-based perovskites are not stable under typical TE device operating conditions. Here, we report a stable two-dimensional Sn-based perovskite for thermoelectric energy conversion by incorporating bulky conjugated ligands. We demonstrate a thin film with a large power factor of 5.42 ± 3.07 (average) and 7.07 (champion) µW m-1 K-2 at 343 K with an electrical conductivity of 5.07 S cm-1 and a Seebeck coefficient of 118.1 µV K-1. Importantly, these thin films show excellent operational stability (i.e., for over 100 h) at 313 K. This work suggests that the novel hybrid two-dimensional perovskites are a promising platform for thermoelectric energy conversion applications.

Ligand-Driven Grain Engineering of High Mobility Two-Dimensional Perovskite Thin-Film Transistors.

Controlling grain growth is of great importance in maximizing the charge carrier transport for polycrystalline thin-film electronic devices. The thin-film growth of halide perovskite materials has been manipulated via a number of approaches including solvent engineering, composition engineering, and post-treatment processes. However, none of these methods lead to large-scale atomically flat thin films with extremely large grain size and high charge carrier mobility. Here, we demonstrate a novel π-conjugated ligand design approach for controlling the thin-film nucleation and growth kinetics in two-dimensional (2D) halide perovskites. By extending the π-conjugation and increasing the planarity of the semiconducting ligand, nucleation density can be decreased by more than 5 orders of magnitude. As a result, wafer-scale 2D perovskite thin films with highly ordered crystalline structures and extremely large grain size are readily obtained. We demonstrate high-performance field-effect transistors with hole mobility approaching 10 cm2 V-1 s-1 with ON/OFF current ratios of ∼106 and excellent stability and reproducibility. Our modeling analysis further confirms the origin of enhanced charge transport and field and temperature dependence of the observed mobility, which allows for clear deciphering of the structure-property relationships in these nascent 2D semiconductor systems.

Molecular Design Features for Charge Transport in Nonconjugated Radical Polymers.

Conducting polymers based on open-shell radical moieties exhibit potentially advantageous processing, stability, and optical attributes compared with conventional doped conjugated polymers. Despite their ascendance, reported radical conductors have been based almost exclusively on (2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO), which raises fundamental questions regarding the ultimate limits of charge transport in these materials and whether some of the deficiencies exhibited by contemporary materials are due to the choice of radical chemistry. To address these questions, we have performed a density functional theory (DFT) study of the charge transfer characteristics of a broad range of open-shell chemistries relevant to radical conductors, including p-type, n-type, and ambipolar open-shell chemistries. We observe that far from being representative, TEMPO exhibits anomalously high reorganization energies due to strong charge localization. This, in turn, limits charge transfer in TEMPO compared with more delocalized open-shell species. By comprehensively mapping the dependence of charge transfer on radical-radical orientation, we have also identified a large mismatch between the conformations that are favored by intermolecular interactions and the conformations that maximize charge transfer in all of the open-shell chemistries investigated. These results suggest that significant opportunities exist to exploit directing interactions to promote charge transport in radical polymers.

Manipulating polymer composition to create low-cost, high-fidelity sensors for indoor CO2 monitoring.

Carbon dioxide (CO2) has been linked to many deleterious health effects, and it has also been used as a proxy for building occupancy measurements. These applications have created a need for low-cost and low-power CO2 sensors that can be seamlessly incorporated into existing buildings. We report a resonant mass sensor coated with a solution-processable polymer blend of poly(ethylene oxide) (PEO) and poly(ethyleneimine) (PEI) for the detection of CO2 across multiple use conditions. Controlling the polymer blend composition and nanostructure enabled better transport of the analyte gas into the sensing layer, which allowed for significantly enhanced CO2 sensing relative to the state of the art. Moreover, the hydrophilic nature of PEO resulted in water uptake, which provided for higher sensing sensitivity at elevated humidity conditions. Therefore, this key integration of materials and resonant sensor platform could be a potential solution in the future for CO2 monitoring in smart infrastructure.

All-printed stretchable corneal sensor on soft contact lenses for noninvasive and painless ocular electrodiagnosis.

Electroretinogram examinations serve as routine clinical procedures in ophthalmology for the diagnosis and management of many ocular diseases. However, the rigid form factor of current corneal sensors produces a mismatch with the soft, curvilinear, and exceptionally sensitive human cornea, which typically requires the use of topical anesthesia and a speculum for pain management and safety. Here we report a design of an all-printed stretchable corneal sensor built on commercially-available disposable soft contact lenses that can intimately and non-invasively interface with the corneal surface of human eyes. The corneal sensor is integrated with soft contact lenses via an electrochemical anchoring mechanism in a seamless manner that ensures its mechanical and chemical reliability. Thus, the resulting device enables the high-fidelity recording of full-field electroretinogram signals in human eyes without the need of topical anesthesia or a speculum. The device, superior to clinical standards in terms of signal quality and comfortability, is expected to address unmet clinical needs in the field of ocular electrodiagnosis.