An innovative Fuller's earth-based film-forming formulation for skin decontamination, through removal and entrapment of an organophosphorus compound, paraoxon-ethyl.

Organophosphorus compounds (OPs), such as VX, pose a significant threat due to their neurotoxic and hazardous properties. Skin decontamination is essential to avoid irreversible effects. Fuller's earth (FE), a phyllosilicate conventionally employed in powder form, has demonstrated decontamination capacity against OPs. The aim of this study was to develop a formulation that forms a film on the skin, with a significant OP removal capacity (>95 %) coupled with sequestration capabilities, favorable drying time and mechanical properties to allow for easy application and removal, particularly in emergency context. Various formulations were prepared using different concentrations of polyvinyl alcohol (PVA), FE and surfactants. Their removal and sequestration capacity was tested using paraoxon-ethyl (POX), a chemical that simulates the behavior of VX. Formulations with removal capacity levels surpassing 95 % were mechanically characterized and cell viability assays were performed on Normal Human Dermal Fibroblast (NHDF). The four most promising formulations were used to assess decontamination efficacy on pig ear skin explants. These formulations showed decontamination levels ranging from 84.4 ± 4.7 % to 96.5 ± 1.3 %, which is equivalent to current decontamination methods. These results suggest that this technology could be a novel and effective tool for skin decontamination following exposure to OPs.

Understanding the Effects of Binders in Gas Sorption and Acidity of Aluminium Fumarate Extrudates.

Understanding the impact of shaping processes on solid adsorbents is critical for the implementation of MOFs in industrial separation processes or as catalytic materials. Production of MOF-containing shaped particles is typically associated with loss of porosity and modification of acid sites, two phenomena that affect their performance. Herein, we report a detailed study on how extrusion affects the crystallinity, porosity, and acidity of the aluminium fumarate MOF with clays or SiO2 gel binders. Thorough characterization showed that the clay binders confer the extrudates a good mechanical robustness at the expense of porosity, while silica gel shows an opposite trend. The CO2 selectivity towards CH4 , of interest for natural gas separation processes, is maintained upon the extrusion process. Moreover, probe FTIR spectroscopy revealed no major changes in the types of acid sites. This study highlights that these abundant and inexpensive clay materials may be used for scaling MOFs as active adsorbents.

Zinc(ii) and cadmium(ii) amorphous metal-organic frameworks (aMOFs): study of activation process and high-pressure adsorption of greenhouse gases.

Two novel amorphous metal-organic frameworks (aMOFs) with chemical composition {[Zn2(MTA)]·4H2O·3DMF} n (UPJS-13) and {[Cd2(MTA)]·5H2O·4DMF} n (UPJS-14) built from Zn(ii) and Cd(ii) ions and extended tetrahedral tetraazo-tetracarboxylic acid (H4MTA) as a linker were prepared and characterised. Nitrogen adsorption measurements were performed on as-synthesized (AS), ethanol exchanged (EX) and freeze-dried (FD) materials at different activation temperatures of 60, 80, 100, 120, 150 and 200 °C to obtain the best textural properties. The largest surface areas of 830 m2 g-1 for UPJS-13 (FD) and 1057 m2 g-1 for UPJS-14 (FD) were calculated from the nitrogen adsorption isotherms for freeze-dried materials activated at mild activation temperature (80 °C). Subsequently, the prepared compounds were tested as adsorbents of greenhouse gases, carbon dioxide and methane, measured at high pressures. The maximal adsorption capacities were 30.01 wt% CO2 and 4.84 wt% CH4 for UPJS-13 (FD) and 24.56 wt% CO2 and 6.38 wt% CH4 for UPJS-14 (FD) at 20 bar and 30 °C.

Tailoring the separation properties of flexible metal-organic frameworks using mechanical pressure.

Metal-organic frameworks are widely considered for the separation of chemical mixtures due to their adjustable physical and chemical properties. However, while much effort is currently devoted to developing new adsorbents for a given separation, an ideal scenario would involve a single adsorbent for multiple separations. Porous materials exhibiting framework flexibility offer unique opportunities to tune these properties since the pore size and shape can be controlled by the application of external stimuli. Here, we establish a proof-of-concept for the molecular sieving separation of species with similar sizes (CO2/N2 and CO2/CH4), via precise mechanical control of the pore size aperture in a flexible metal-organic framework. Besides its infinite selectivity for the considered gas mixtures, this material shows excellent regeneration capability when releasing the external mechanical constraint. This strategy, combining an external stimulus applied to a structurally compliant adsorbent, offers a promising avenue for addressing some of the most challenging gas separations.

A series of four novel alkaline earth metal-organic frameworks constructed of Ca(ii), Sr(ii), Ba(ii) ions and tetrahedral MTB linker: structural diversity, stability study and low/high-pressure gas adsorption properties.

A series of four novel microporous alkaline earth metal-organic frameworks (AE-MOFs) containing methanetetrabenzoate linker (MTB) with composition {[Ca4(µ8-MTB)2]·2DMF·4H2O} n (UPJS-6), {[Ca4(µ4-O)(µ8-MTB)3/2(H2O)4]·4DMF·4H2O} n (UPJS-7), {[Sr3(µ7-MTB)3/2]·4DMF·7H2O} n (UPJS-8) and {[Ba3(µ7-MTB)3/2(H2O)6]·2DMF·4H2O} n (UPJS-9) (UPJS = University of Pavol Jozef Safarik) have been successfully prepared and characterized. The framework stability and thermal robustness of prepared materials were investigated using thermogravimetric analysis (TGA) and high-energy powder X-ray diffraction (HE-PXRD). MOFs were tested as adsorbents for different gases at various pressures and temperatures. Nitrogen and argon adsorption showed that the activated samples have moderate BET surface areas: 103 m2 g-1 (N2)/126 m2 g-1 (Ar) for UPJS-7'', 320 m2 g-1 (N2)/358 m2 g-1 (Ar) for UPJS-9'' and UPJS-8'' adsorbs only a limited amount of N2 and Ar. It should be noted that all prepared compounds adsorb carbon dioxide with storage capacities ranging from 3.9 to 2.4 wt% at 20 °C and 1 atm, and 16.4-13.5 wt% at 30 °C and 20 bar. Methane adsorption isotherms show no adsorption at low pressures and with increasing pressure the storage capacity increases to 4.0-2.9 wt% of CH4 at 30 °C and 20 bar. Compounds displayed the highest hydrogen uptake of 3.7-1.8 wt% at -196 °C and 800 Torr among MTB containing MOFs.

Microporous Lead-Organic Framework for Selective CO2 Adsorption and Heterogeneous Catalysis.

A novel microporous metal-organic framework, {[Pb4(µ8-MTB)2(H2O)4]·5DMF·H2O}n (1; MTB = methanetetrabenzoate and DMF = N,N'-dimethylformamide), was successfully synthesized by a solvothermal reaction and structurally characterized by single-crystal X-ray diffraction. The framework exhibits a unique tetranuclear [Pb4(µ3-COO)(µ2-COO)6(COO)(H2O)4] secondary building unit (SBU). The combination of the SBU with the tetrahedral symmetry of MTB results in a three-dimensional network structure, with one-dimensional jarlike cavities having sizes of about 14.98 × 7.88 and 14.98 × 13.17 Å2 and propagating along the c axis. Due to the presence of four coordinately unsaturated sites per one metal cluster, an activated form of compound 1 (i.e., desolvated form denoted as 1') was tested in gas adsorption and catalytic experiments. The studies of gas sorption revealed that 1' exhibits a surface area (Brunauer-Emmett-Teller) of 980 m2·g-1. This value is the highest reported for any compound from the MTB group. Interactions of carbon dioxide (CO2) molecules with the framework, confirmed by density functional theory calculations, resulted in high CO2 uptake and significant selectivity of CO2 adsorption with respect to methane (CH4) and dinitrogen (N2) when measured from atmospheric pressure to 21 bar. The high selectivity of CO2 over N2 is mostly important for capturing CO2 from the atmosphere in attempts to decrease the greenhouse effect. Moreover, compound 1' was tested as a heterogeneous catalyst in Knoevenagel condensation of active methylene compounds with aldehydes. Excellent catalytic conversion and selectivity in the condensation of benzaldehyde and cyclohexanecarbaldehyde with malononitrile was observed, which suggests that accessible lead(II) sites play an important role in the heterogeneous catalytic process.

Screening the Effect of Water Vapour on Gas Adsorption Performance: Application to CO2 Capture from Flue Gas in Metal-Organic Frameworks.

A simple laboratory-scale protocol that enables the evaluation of the effect of adsorbed water on CO2 uptake is proposed. 45 metal-organic frameworks (MOFs) were compared against reference zeolites and active carbons. It is possible to classify materials with different trends in CO2 uptake with varying amounts of pre-adsorbed water, including cases in which an increase in CO2 uptake is observed for samples with a given amount of pre-adsorbed water. Comparing loss in CO2 uptake between "wet" and "dry" samples with the Henry constant calculated from the water adsorption isotherm results in a semi-logarithmic trend for the majority of samples allowing predictions to be made. Outliers from this trend may be of particular interest and an explanation for the behaviour for each of the outliers is proposed. This thus leads to propositions for designing or choosing MOFs for CO2 capture in applications where humidity is present.

A Robust Infinite Zirconium Phenolate Building Unit to Enhance the Chemical Stability of Zr MOFs.

A novel Zr-chain based MOF, namely MIL-163, was designed and successfully synthesized using a bis-1,2,3-trioxobenzene ligand. Endowed with large square-shaped channels of 12 Šwidth, it shows remarkable water uptake (ca. 0.6 cm(3) g(-1) at saturating vapor pressure) and a remarkable stability in simulated physiological media, where archetypical Zr carboxylate MOFs readily degrade.

Adsorption of CO2 on amine-functionalised MCM-41: experimental and theoretical studies.

Adsorption of CO2 on MCM-41 functionalised with [3-(2-aminoethylamino)propyl]trimethoxysilane (MCM-41-N2), N(1)-(3-trimethoxysilylpropyl)diethylenetriamine (MCM-41-N3), 4-aminopyridine (MCM-41-aminopyridine), 4-(methylamino)pyridine (MCM-41-methylaminopyridine) and 1,5,7-triazabicyclo[4.4.0]dec-5-ene (MCM-41-guanidine) was investigated. The amine-functionalised materials were characterised by (29)Si and (13)C solid-state nuclear magnetic resonance, N2 adsorption/desorption isotherms, X-ray diffraction and transmission electron microscopy. CO2 adsorption at 1.0 bar and 30 °C showed that the amount of CO2 (nads/mmol g(-1)) adsorbed on MCM-41-N2 and MCM-41-N3 is approximately twice the amount adsorbed on MCM-41. For MCM-41-aminopyridine, MCM-41-methylaminopyridine and MCM-41-guanidine, the CO2 adsorption capacity was smaller than that of MCM-41 at the same conditions. The proton affinity (computed with wB97x-D/6-311++G(d,p)) of the secondary amino groups is higher than that of the primary amino groups; however, the relative stabilities of the primary and secondary carbamates are similar. The differential heat of adsorption decreases as the number of secondary amino groups increases.

A method for screening the potential of MOFs as CO2 adsorbents in pressure swing adsorption processes.

This work reports the adsorption and coadsorption data of CO(2)/CH(4)/CO mixtures on several metal-organic frameworks [MOFs; MIL-100(Cr), MIL-47(V), MIL-140(Zr)-A, Cu-btc, and MIL-53(Cr)] and compares them with reference adsorbents, that is, zeolite NaX and an activated carbon material, AC35. We also evaluate the effect of H(2)O on CO(2) adsorption and on the stability of the structures. Based on the experimental adsorption data, the performance potential of MOFs in several pressure swing adsorption processes is estimated by making a ranking of working capacities and separation factors. We discuss the separation of biogas, the purification of H(2) produced by steam reforming of methane, and the removal of CO(2) from synthesis gas in IGCC (integrated gasification combined cycle) systems. Some MOFs are very well placed in the ranking of (isothermal) working capacity vs. selectivity. Yet, performance is not the only criterion for the selection of MOFs. Ease and cost of synthesis and long-term stability are other important aspects that have to be taken into account.

An evaluation of UiO-66 for gas-based applications.

In addition to its high thermal stability, repetitive hydration/dehydration tests have revealed that the porous zirconium terephthalate UiO-66 switches reversibly between its dehydroxylated and hydroxylated versions. The structure of its dehydroxylated form has thus been elucidated by coupling molecular simulations and X-ray powder diffraction data. Infrared measurements have shown that relatively weak acid sites are available while microcalorimetry combined with Monte Carlo simulations emphasize moderate interactions between the UiO-66 surface and a wide range of guest molecules including CH(4), CO, and CO(2). These properties, in conjunction with its significant adsorption capacity, make UiO-66 of interest for its further evaluation for CO(2) recovery in industrial applications. This global approach suggests a strategy for the evaluation of metal-organic frameworks for gas-based applications.

Explanation of the adsorption of polar vapors in the highly flexible metal organic framework MIL-53(Cr).

A comparison of the adsorption of water, methanol, and ethanol polar vapors by the flexible porous chromium(III) terephthalate MIL-53(Cr) was investigated by complementary techniques including adsorption gravimetry, ex situ X-ray powder diffraction, microcalorimetry, thermal analysis, IR spectroscopy, and molecular modeling. The breathing steps observed during adsorption strongly depend on the nature of the vapor. With water, a significant contraction of the framework is observed. For the alcohols, the initial contraction is followed by an expansion of the framework. A combination of IR analysis, X-ray diffraction, and computer modeling leads to the molecular localization of the guest molecules and to the identification of the specific guest-guest and host-guest interactions. The enthalpies of adsorption, measured by microcalorimetry, show that the strength of the interactions decreases from ethanol to water. Differential scanning calorimetry experiments on an EtOH/H(2)O mixture suggest a selective adsorption of ethanol over water.

Hydrocarbon adsorption in the flexible metal organic frameworks MIL-53(Al, Cr).

A general study of the adsorption of n-alkanes in the flexible metal organic framework (MOF) MIL-53 is presented. The roles of the length of the alkyl chain (n = 1-9), the nature of the metal (Al, Cr), and temperature were investigated. The shape of the adsorption curves is driven by the alkyl chain length of the n-alkanes. While traditional type-I isotherms are observed for short alkanes (n = 1, 2), adsorbates with longer chains induce clear substeps in the isotherm curves whose positions depend on the chain length. Such substeps are due to a breathing phenomenon, as proven by ex situ X-ray diffraction analysis. They strongly depend on the amount of adsorbate in the pores and on the nature of the metal (Al, Cr), which, for a given alkane, leads to a strong change in the substep positions despite the similar characteristics of the two metals. The adsorption kinetics are highly sensitive to small variations in temperature. Their detailed analysis in different regions of the isotherms shows in some cases the existence of distinct diffusion regimes and/or conformations within the flexible phases.

Structural Transformations and adsorption of fuel-related gases of a structurally responsive nickel phosphonate metal-organic framework, Ni-STA-12.

The structure of the nickel N,N'-piperazinebismethylenephosphonate, Ni-STA-12 (St. Andrews porous material-12), has been determined in the hydrated (Ni2L x 8 H2O, L = O3PCH2NC4H8NCH2PO3), partially dehydrated (Ni2L x 2 H2O), and fully dehydrated (Ni2L) forms from high-resolution synchrotron X-ray powder diffraction. The framework structures of Ni2L x 8 H2O and Ni2L x 2 H2O are almost identical (R, a = 27.8342(1) A, c = 6.2421(2) A; R, a = 27.9144(1) A, c = 6.1655(2) A) with additional physisorbed water of the as-prepared Ni-STA-12 present in an ordered hydrogen-bonded network in the channels. Ab initio structure solution of the fully dehydrated solid indicates it has changed symmetry to triclinic (P1, a = 6.03475(5) A, b = 14.9157(2) A, c = 16.1572(2) A, alpha = 112.5721(7) degrees, beta = 95.7025(11) degrees, gamma = 96.4950(11) degrees) as a result of a topotactic structural rearrangement. The fully dehydrated solid possesses permanent porosity with elliptical channels 8 A x 9 A in free diameter. The structural change results from the loss of water coordinated to the nickel cations, so that the nickel coordination changes from edge-sharing octahedral NiO5N to edge- and corner-sharing five-fold NiO4N. During this change, two out of three phosphonate groups rotate to become fully coordinated to nickel cations, leaving the remainder of the phosphonate groups coordinated to nickel cations by two oxygen atoms and with a P=O bond projecting into the channels. This transformation, which is completely reversible, causes substantial changes in both vibrational and electronic properties as shown by IR, Raman, and UV-visible spectroscopies. Complementary adsorption, calorimetric, and infrared studies of the probe adsorbates H2, CO, and CO2 reveal the presence of several distinct adsorption sites in the solid, which are attributed to their interactions with nickel cations which are weak Lewis acid sites, as well as with P=O groups that project into the pores. At 304 K, the adsorption isotherms and enthalpies of adsorption on dehydrated Ni-STA-12 have been measured for CO2 and CH4: Ni-STA-12 gives adsorption uptakes of CO2 of 2.5 mmol g(-1) at 1 bar, an uptake ca. 10 times that of CH4.

Prediction of the conditions for breathing of metal organic framework materials using a combination of X-ray powder diffraction, microcalorimetry, and molecular simulation.

The adsorption of C1 to C4 linear hydrocarbons in the flexible metal organic framework MIL-53(Cr) has been followed by adsorption manometry coupled with microcalorimetry and Synchrotron X-ray powder diffraction. This experimental investigation was completed by molecular modeling. In the case of methane, the solid remains rigid whatever the adsorbate amount. However for the C2-C4 series, an increasing flexibility of the structure is observed, which is ascribed first to a breathing of the material from a large pore to a narrow pore form followed by a further expansion at high pressure. The collected thermodynamic and structural information suggests that a minimum adsorption enthalpy of ca. 20 kJ mol (-1) in the initial large pore structure of MIL-53(Cr) is required to induce the structural transition "large to narrow pore". Further, the enthalpy of adsorption can be used to predict the pressure at which the structure reopens. Finally, the magnitude of the breathing can be related to the size of the probe molecule via the van der Waals volume. The above trends have been successfully verified in the case of water and carbon dioxide. This combined experimental and theoretical approach gives the first elements for the prediction of whether or not the MIL53 and similar flexible structures will respond to gas loading and what would be the pressure required and further the amplitude of the induced breathing.

High uptakes of CO2 and CH4 in mesoporous metal-organic frameworks MIL-100 and MIL-101.

Mesoporous MOFs MIL-100 and MIL-101 adsorb huge amounts of CO2 and CH4. Characterization was performed using both manometry and gravimetry in different laboratories for isotherms coupled with microcalorimetry and FTIR to specify the gas-solid interactions. In particular, the uptake of carbon dioxide in MIL-101 has been shown to occur with a record capacity of 40 mmol g(-1) or 390 cm3STP cm(-3) at 5 MPa and 303 K.