Synchronized cyclic capillary electrophoresis using channels arranged in a triangle and low voltages.

Synchronized cyclic capillary electrophoresis (SCCE) makes use of a closed loop separation channel by which the same sample can be separated during many cycles. This enables the repeated use of the same voltage for separations such that a high total voltage, and thus high efficiency, is obtained for the synchronized components. This can be accomplished by using any type of polygon geometry for the separation channel; and calculations of the available field and number of connections needed for polygons from 3 to 5 sides are presented. Triangular designs have the advantage of using the lowest number of wells. Such designs are described, with two additional features compared to that of earlier work: 1. voltage connections that are much shallower than the separation channel, to reduce losses and dispersion at the intersections; and 2. corners that are narrower than the separation channels to reduce dispersion in the turns. Experimental data is presented for the separation of a mixture of amino acids, and for a DNA separation in a polymeric sieving matrix. The DNA separation is most sensitive to the corner dispersion problem, which reduces the observed efficiency for that separation.

Protein sizing on a microchip.

We have developed a microfabricated analytical device on a glass chip that performs a protein sizing assay, by integrating the required separation, staining, virtual destaining, and detection steps. To obtain a universal noncovalent fluorescent labeling method, we have combined on-chip dye staining with a novel electrophoretic dilution step. Denatured protein-sodium dodecyl sulfate (SDS) complexes are loaded on a chip and bind a fluorescent dye as the separation begins. At the end of the separation channel, an intersection is used to dilute the SDS below its critical micelle concentration before the detection point. This strongly reduces the background due to dye molecules bound to SDS micelles and also increases the peak amplitude by 1 order of magnitude. Both the on-chip staining and SDS dilution steps occur in the 100-ms time scale and are approximately 10(4) times faster than their conventional counterparts in SDS-PAGE. This represents a much greater speed increase due to microfabrication than has been obtained in other assay steps such as electrophoretic separations. We have designed and tested a microchip capable of sequentially analyzing 11 different samples, with sizing accuracy better than 5% and high sensitivity (30 nM for carbonic anhydrase).

Electrokinetically controlled microfluidic analysis systems.

Electrokinetic forces are emerging as a powerful means to drive microfluidic systems with flow channel cross-sectional dimensions in the tens of micrometers and flow rates in the nanoliter per second range. These systems provide many advantages such as improved analysis speed, improved reproducibility, greatly reduced reagent consumption, and the ability to perform multiple operations in an integrated fashion. Planar microfabrication methods are used to make these analysis chips in materials such as glass or polymers. Many applications of this technology have been demonstrated, such as DNA separations, enzyme assays, immunoassays, and PCR amplification integrated with microfluidic assays. Further development of this technology is expected to yield higher levels of functionality of sample throughput on a single microfluidic analysis chip.

Microfabrication in silicon microphysiometry.

Over the past 5 years, microphysiometry has proved an effective means for detecting physiological changes in cultured cells, particularly as a functional assay for the activation of many cellular receptors. To demonstrate the clinical relevance of this method, we have used it to detect bacterial antibiotic sensitivity and to discriminate between bacteriostatic and bacteriocidal concentrations. The light-addressable potentiometric sensor, upon which microphysiometry is based, is well suited for structural manipulations based on photolithography and micromachining, and we have begun to take advantage of this capability. We present results from a research instrument with eight separate assay channels on a 5-cm2 chip. We discuss the planned evolution of the technology toward high-through-put instruments and instruments capable of performing single-cell measurements.

Detection of cell-affecting agents with a silicon biosensor.

Cellular metabolism is affected by many factors in a cell's environment. Given a sufficiently sensitive method for measuring cellular metabolic rates, it should be possible to detect a wide variety of chemical and physical stimuli. A biosensor has been constructed in which living cells are confined to a flow chamber in which a potentiometric sensor continually measures the rate of production of acidic metabolites. Exploratory studies demonstrate several applications of the device in basic science and technology.