ABSTRACT
The lid-driven top wall's influence combined with the side walls' waviness map induce the mixed convection heat transfer, flow behavior, and entropy generation of a hybrid nanofluid (Fe3O4-MWCNT/water), a process analyzed through the present study. The working fluid occupies a permeable cubic chamber and is subjected to a magnetic field. The governing equations are solved by employing the GFEM method. The results show that the magnetic force significantly affects the working fluid's thermal and flow behavior, where the magnetic force's perpendicular direction remarkably improves the thermal distribution at Re = 500. Also, increasing Ha and decreasing Re drops both the irreversibility and the heat transfer rate. In addition, the highest undulation number on the wavy-sided walls gives the best heat transfer rate and the highest irreversibility.
ABSTRACT
A numerical study was performed to analyze the impact of the combination of several factors on heat transfer rate, flow behavior, and entropy generation in a hybrid nanofluid occupying a porous trapezoid enclosure containing a rotating inner tube. The governing equations were discretized and solved using the Finite Element Method using Comsol multiphysics. The effects of the Darcy and Hartman number, nanoparticle volume fraction (from 0 to 6%), the utilization of various zigzag patterns of the hot wall, and the rotation speed of the inner tube (Ω = 100. 250 and 500) are illustrated and discussed in this work. The outputs reveal that flow intensity has an inverse relationship with Hartman number and a direct relationship with the Darcy number and the velocity of the inner tube, especially at high numbers of undulations of the zigzag hot wall (N = 4); also, intensification of heat transfer occurs with increasing nanoparticle volume fraction, Darcy number and velocity of the inner tube. In addition, entropy generation is strongly affected by the mentioned factors, where increasing the nanoparticle concentration augments the thermal entropy generation and reduces the friction entropy generation; furthermore, the same influence can be obtained by increasing the Hartman number or decreasing the Darcy number. However, the lowest entropy generation was found for the case of Ø = 0, Ha = 0 and Da = 0.01.
ABSTRACT
A 2D-symmetric numerical study of a new design of Nano-Enhanced Phase change material (NEPCM)-filled enclosure is presented in this paper. The enclosure is equipped with an inner tube allowing the circulation of the heat transfer fluid (HTF); n-Octadecane is chosen as phase change material (PCM). Comsol-Multiphysics commercial code was used to solve the governing equations. This study has been performed to examine the heat distribution and melting rate under the influence of the inner-tube position and the concentration of the nanoparticles dispersed in the PCM. The inner tube was located at three different vertical positions and the nanoparticle concentration was varied from 0 to 0.06. The results revealed that both heat transfer/melting rates are improved when the inner tube is located at the bottom region of the enclosure and by increasing the concentration of the nanoparticles. The addition of the nanoparticles enhances the heat transfer due to the considerable increase in conductivity. On the other hand, by placing the tube in the bottom area of the enclosure, the liquid PCM gets a wider space, allowing the intensification of the natural convection.
