In vitro oxidative stability of high strength siloxane poly(urethane-urea) elastomers based on linked-macrodiol.

In vitro oxidative stability of two siloxane poly(urethane urea)s synthesized using 4,4'-methylenediphenyl diisocyanate (in SiPUU-1) and Isophorone diisocyanate (in SiPUU-2) linked soft segment was evaluated using 20% H2 O2 and 0.1 mol/L CoCl2 solution at 37°C under 150% strain. Commercially available siloxane polyurethane (Elast-Eon™ 2A) and polyether polyurethane (ChronoThane P™ 80A) were used as negative and positive controls, respectively. ChronoSil™ 80A was included as another commercially available polycarbonate polyurethane. Scanning electron microscopic (SEM) examinations, attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, and molecular weight reduction revealed the extensive degradation of ChronoThane P™ 80A after 90 days while SiPUU-1, SiPUU-2 and Elast-Eon™ 2A showed no noticeable surface degradation. ChronoSil™ 80A showed degradation in both soft and hard segments. Tensile testing was carried out only on unstrained polyurethanes for 90 days. ChronoThane P™ 80A showed 35% loss in ultimate tensile strength and it was only 13-14% for SiPUU-1 and Elast-Eon™ 2A. However, the tensile strength of ChronoSil™ 80A was not significantly affected. The results of this study proved that SiPUU-1 possess oxidative stability comparable with Elast-Eon™ 2A. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B:2557-2565, 2019.

Morphology and surface properties of high strength siloxane poly(urethane-urea)s developed for heart valve application.

A series of siloxane poly(urethane-urea) (SiPUU) were developed by incorporating a macrodiol linked with a diisocyanate to enhance mixing of hard and soft segments (SS). The effect of this modification on morphology, surface properties, surface elemental composition, and creep resistance was investigated. The linked macrodiol was prepared by reacting α,ω-bis(6-hydroxyethoxypropyl) poly(dimethylsiloxane)(PDMS) or poly(hexamethylene oxide) (PHMO) with either 4,4'-methylenediphenyl diisocyanate (MDI), hexamethylene diisocyanate (HDI), or isophorone diisocyanate (IPDI). SiPUU with PHMO-MDI-PHMO and PHMO-IPDI-PHMO linked macrodiols showed enhanced creep resistance and recovery when compared with a commercial biostable polyurethane, Elast-Eon™ 2A. Small and wide-angle X-ray scattering data were consistent with significant increase of hydrogen bonding between hard and SS with linked-macrodiols, which improved SiPUU's tensile stress and tear strengths. These SiPUU were hydrophobic with contact angle higher than 101° and they had low water uptake (0.7%·w/w of dry mass). They also had much higher siloxane concentration on the surface compared to that in the bulk. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 107B: 112-121, 2019.

Development of high strength siloxane poly(urethane-urea) elastomers based on linked macrodiols for heart valve application.

Mixed macrodiol based siloxane poly(urethane-urea)s (SiPUU) having number average molecular weights in the range 87-129 kDa/mol were synthesized to give elastomers with high tensile and tear strengths required to fabricate artificial heart valves. Polar functional groups were introduced into the soft segment to improve the poor segmental compatibility of siloxane polyurethanes. This was achieved by linking α,ω-bis(6-hydroxyethoxypropyl) poly(dimethylsiloxane) (PDMS) or poly(hexamethylene oxide) (PHMO) macrodiols with either 4,4'-methylenediphenyl diisocyanate (MDI), hexamethylene diisocyanate (HDI) or isophorone diisocyanate (IPDI) prior to polyurethane synthesis. The hard segment was composed of MDI, and a 1:1 mixture of 1,3-bis(4-hydroxybutyl)-1,1,3,3-tetramethyldisiloxane and 1,2-ethylene diamine. We report the effect of urethane linkers in soft segments on properties of the SiPUU. PHMO linked with either MDI or IPDI produced SiPUU with the highest tensile and tear strengths. Linking PDMS hardly affected the tensile strength; however, the tear strength was improved. The stress-strain curves showed no plastic deformation region typically observed for conventional polyurethanes indicating good creep resistance. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1712-1720, 2018.

Phosphasalen Indium Complexes Showing High Rates and Isoselectivities in rac-Lactide Polymerizations.

Polylactide (PLA) is the leading bioderived polymer produced commercially by the metal-catalyzed ring-opening polymerization of lactide. Control over tacticity to produce stereoblock PLA, from rac-lactide improves thermal properties but is an outstanding challenge. Here, phosphasalen indium catalysts feature high rates (30±3 m-1 min-1 , THF, 298 K), high control, low loadings (0.2 mol %), and isoselectivity (Pi =0.92, THF, 258 K). Furthermore, the phosphasalen indium catalysts do not require any chiral additives.

Redox Levels of a closo-Osmaborane: A Density Functional Theory, Electron Paramagnetic Resonance and Electrochemical Study.

A closo-type 11-vertex osmaborane [1-(η(6)-pcym)-1-OsB10H10] (pcym = para-cymene) has been synthesized and characterized by single-crystal X-ray diffraction and elemental analysis, as well as by (11)B and (1)H NMR, UV-visible, and mass spectrometry. The redox chemistry has been probed by dc and Fourier transformed ac voltammetry and bulk reductive electrolysis in CH3CN (0.10 M (n-Bu)4NPF6) and by voltammetry in the ionic liquid N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide (Pyrr1,4-NTf2), which allows the oxidative chemistry of the osmaborane to be studied. A single-crystal X-ray diffraction analysis has shown that [1-(η(6)-pcym)-1-OsB10H10] is isostructural with other metallaborane compounds of this type. In CH3CN (0.10 M (n-Bu)4NPF6), [1-(η(6)-pcym)-1-OsB10H10] undergoes two well-resolved one-electron reduction processes with reversible potentials separated by ca. 0.63-0.64 V. Analysis based on a comparison of experimental and simulated ac voltammetric data shows that the heterogeneous electron transfer rate constant (k(0)) for the first reduction process is larger than that for the second step at GC, Pt, and Au electrodes. k(0) values for both processes are also larger at GC than metal electrodes and depend on the electrode pretreatment, implying that reductions involve specific interaction with the electrode surface. EPR spectra derived from the product formed by one-electron reduction of [1-(η(6)-pcym)-1-OsB10H10] in CH3CN (0.10 M (n-Bu)4NPF6) and electron orbital data derived from the DFT calculations are used to establish that the formal oxidation state of the metal center of the original unreduced compound is Os(II). On this basis it is concluded that the metal atom in [1-(η(6)-pcym)-1-OsB10H10] and related metallaboranes makes a 3-orbital 2-electron contribution to the borane cluster. Oxidation of [1-(η(6)-pcym)-1-OsB10H10] coupled to fast chemical transformation was observed at 1.6 V vs ferrocene(0/+) in Pyrr1,4-NTf2. A reaction scheme for the oxidation involving formation of [1-(η(6)-pcym)-1-OsB10H10](+), which rearranges to an unknown electroactive derivative, is proposed, and simulations of the voltammograms are provided.

Carbon dioxide postcombustion capture: a novel screening study of the carbon dioxide absorption performance of 76 amines.

The significant and rapid reduction of greenhouse gas emissions is recognized as necessary to mitigate the potential climate effects from global warming. The postcombustion capture (PCC) and storage of carbon dioxide (CO2) produced from the use of fossil fuels for electricity generation is a key technology needed to achieve these reductions. The most mature technology for CO2 capture is reversible chemical absorption into an aqueous amine solution. In this study the results from measurements of the CO2 absorption capacity of aqueous amine solutions for 76 different amines are presented. Measurements were made using both a novel isothermal gravimetric analysis (IGA) method and a traditional absorption apparatus. Seven amines, consisting of one primary, three secondary, and three tertiary amines, were identified as exhibiting outstanding absorption capacities. Most have a number of structural features in common including steric hindrance and hydroxyl functionality 2 or 3 carbons from the nitrogen. Initial CO2 absorption rate data from the IGA measurements was also used to indicate relative absorption rates. Most of the outstanding performers in terms of capacity also showed initial absorption rates comparable to the industry standard monoethanolamine (MEA). This indicates, in terms of both absorption capacity and kinetics, that they are promising candidates for further investigation.

Density-viscosity product of small-volume ionic liquid samples using quartz crystal impedance analysis.

Quartz crystal impedance analysis has been developed as a technique to assess whether room-temperature ionic liquids are Newtonian fluids and as a small-volume method for determining the values of their viscosity-density product, rho eta. Changes in the impedance spectrum of a 5-MHz fundamental frequency quartz crystal induced by a water-miscible room-temperature ionic liquid, 1-butyl-3-methylimiclazolium trifluoromethylsulfonate ([C4mim][OTf]), were measured. From coupled frequency shift and bandwidth changes as the concentration was varied from 0 to 100% ionic liquid, it was determined that this liquid provided a Newtonian response. A second water-immiscible ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide [C4mim][NTf2], with concentration varied using methanol, was tested and also found to provide a Newtonian response. In both cases, the values of the square root of the viscosity-density product deduced from the small-volume quartz crystal technique were consistent with those measured using a viscometer and density meter. The third harmonic of the crystal was found to provide the closest agreement between the two measurement methods; the pure ionic liquids had the largest difference of approximately 10%. In addition, 18 pure ionic liquids were tested, and for 11 of these, good-quality frequency shift and bandwidth data were obtained; these 12 all had a Newtonian response. The frequency shift of the third harmonic was found to vary linearly with square root of viscosity-density product of the pure ionic liquids up to a value of square root(rho eta) approximately 18 kg m(-2) s(-1/2), but with a slope 10% smaller than that predicted by the Kanazawa and Gordon equation. It is envisaged that the quartz crystal technique could be used in a high-throughput microfluidic system for characterizing ionic liquids.