ABSTRACT
In this study, Taguchi optimization method was applied to determine the optimum operating conditions for batch adsorption of Cr(VI) from aqueous solution. Initial pH of solution, adsorbent dose, initial hexavalent chromium concentration, contact time and adsorbent type were selected as the variables, and the removal efficiency of Cr(VI) was chosen for the designated response. L18(35) orthogonal array, signal-to-noise (S/N) ratio and analysis of variance statistical procedures were applied to identify the effect of each operating parameter on the removal of Cr(VI) from aqueous solution. The signal-to-noise (S/N) ratio results showed that the optimal combination for Cr(VI) removal was at pH 1.0, adsorbent dose of 3.6 g.L-1, Cr(VI) concentration of 30 mg.L-1, contact time of 95 min and olive leaves as adsorbent type. A removal of 95.09% was obtained at these optimum conditions. The analysis of variance of the data revealed that initial pH of solution was the most dominant parameter affecting Cr(VI) removal efficiency, followed by adsorbent type, adsorbent dose, contact time and initial metal concentration. Under optimal conditions, adsorption kinetic of Cr(VI) was studied and modeled using the pseudo first-order, pseudo-second-order and intraparticle diffusion models. It was found that the pseudo-second-order model fitted the adsorption data most with the highest determination coefficient (R2 = 0.996). Freundlich isotherm model, with regression coefficient R2 of 0.953, fit well with the equilibrium isotherm data. The Langmuir maximum adsorption capacity was found to be 62.5 mg.g-1. The experimental values of ΔH°, ΔG° and ΔS° revealed that the adsorption process was spontaneous and endothermic.
ABSTRACT
We report on a simple and one-pot synthetic method to produce ZnO/carbon quantum dots (ZnO/CQDs) nanocomposites. The morphological features and chemical composition of the nanocomposites were characterized using X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analyses (TGA), X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The optical properties of the nanocomposites were examined using UV-visible (UV-vis) spectrophotometry. The photocatalytic activity of the ZnO/CQDs was evaluated for the degradation of a model organic pollutant, rhodamine B, under visible light irradiation at room temperature. The highly efficient photodegradation capability of the nanocomposite was demonstrated by comparison with ZnO particles, prepared using identical experimental conditions. Overall, the present approach adheres to green chemistry principles and the nanocomposite holds promise for the development of remarkably efficient catalytic systems.
