Role of Intragap States in Sensitized Sb-Doped Tin Oxide Photoanodes for Solar Fuels Production.

In view of developing photoelectrosynthetic cells which are able to store solar energy in chemical bonds, water splitting is usually the reaction of choice when targeting hydrogen production. However, alternative approaches can be considered, aimed at substituting the anodic reaction of water oxidation with more commercially capitalizable oxidations. Among them, the production of bromine from bromide ions was investigated long back in the 1980s by Texas Instruments. Herein we present optimized perylene-diimide (PDI)-sensitized antimony-doped tin oxide (ATO) photoanodes enabling the photoinduced HBr splitting with >4 mA/cm2 photocurrent densities under 0.1 W/cm2 AM1.5G illumination and 91 ± 3% faradaic efficiencies for bromine production. These remarkable results, among the best currently reported for the photoelectrochemical Br- oxidation by dye sensitized photoanodes, are strongly related to the occupancy extent of ATO's intragap (IG) states, generated upon Sb-doping, as demonstrated by comparing their performances with PDI-sensitized analogues on both undoped SnO2- and TiO2-passivated ATO scaffolds by means of (spectro)electrochemistry and electrochemical impedance spectroscopy. The architecture of the ATO-PDI photoanodic assembly was further modified via the introduction of a molecular iridium-based water oxidation catalyst, thus proving the versatility of the proposed hybrid interfaces as photoanodic platforms for photoinduced oxidations in PEC devices.

Zinc Electrode Cycling in Deep Eutectic Solvent Electrolytes: An Electrochemical Study.

Among post-lithium ion battery technologies, rechargeable chemistries with Zn anodes bear notable technological promise owing to their high theoretical energy density, lower manufacturing cost, availability of raw materials and inherent safety. However, Zn anodes, when employed in aqueous electrolytes, suffer from hydrogen evolution, passivation, and shape changes. Alternative electrolytes can help tackle these issues, preserving the green and safe characteristics of aqueous-based ones. Deep eutectic solvents (DESs) are promising green and low-cost non-aqueous solvents for battery electrolytes. Specifically, the cycling of Zn anodes in DESs is expected to be reversible, chiefly owing to their dendrite-suppression capability. Nevertheless, apart from a few studies on Zn plating, insight into the cathodic-anodic electrochemistry of Zn in DESs is still very limited. In view of developing DES-based battery electrolytes, it is crucial to consider that a potential drawback might be their low ionic conductivity. Water molecules can be added to the eutectic mixtures by up to 40% to increase the diffusion coefficient of the electroactive species and lower the electrolyte viscosity without destroying the eutectic nature. In this study, we address the electrochemistry of Zn in two different hydrated DESs (ChU and ChEG with ~30% H2O). Fundamental electrokinetic and electrocrystallization studies based on cyclic voltammetry and chronoamperometry at different cathodic substrates are completed with a galvanostatic cycling test of Zn|Zn symmetric CR2032 coin cells, SEM imaging of electrodes and in situ SERS spectroscopy. This investigation concludes with the proposal of a specific DES/H2O/ZnSO4-based electrolyte that exhibits optimal functional performance, rationalized on the basis of fundamental electrochemical data, morphology evaluation and modeling of the cycling response.

Ultrafast Charge Carrier Dynamics in CuWO4 Photoanodes.

CuWO4 is a ternary metal oxide semiconductor with promising properties for photoelectrochemical (PEC) water splitting and solar light conversion, due to its quite low band gap (2.3 eV) and high stability in an alkaline environment. Aiming at understanding the origin of the relatively low PEC efficiency attained with CuWO4 photoanodes, we here investigate transparent CuWO4 electrodes prepared by a simple solution-based method through the combination of femtosecond transient absorption spectroscopy with electrochemical, PEC, and photochromic characterizations. The very fast recombination dynamics of the charge carriers photogenerated in CuWO4, which is the reason for its low efficiency, is discussed in relation with its PEC performance and with the recently calculated band structure of this material, also in comparison with the behavior of other semiconductor oxides employed in PEC applications, in particular Fe2O3.

Electrodeposition of Mn-Co/Polypyrrole Nanocomposites: An Electrochemical and In Situ Soft-X-ray Microspectroscopic Investigation.

Understanding the lateral variations in the elemental and chemical state of constituents induced by electrochemical reactions at nanoscales is crucial for the advancement of electrochemical materials science. This requires in situ studies to provide observables that contribute to both modeling beyond the phenomenological level and exactly transducing the functionally relevant quantities. A range of X-ray coherent diffraction imaging (CDI) approaches have recently been proposed for imaging beyond the diffraction limit with potentially dramatic improvements in time resolution with chemical sensitivity. In this paper, we report a selection of ptychography results obtained in situ during the electrodeposition of a metal⁻polymer nanocomposite. Our selection includes dynamic imaging during electrochemically driven growth complemented with absorption and phase spectroscopy with high lateral resolution. We demonstrate the onset of morphological instability feature formation and correlate the chemical state of Mn with the local growth rate controlled by the current density distribution resulting from morphological evolution.

Accurate Assessment of the Oxygen Reduction Electrocatalytic Activity of Mn/Polypyrrole Nanocomposites Based on Rotating Disk Electrode Measurements, Complemented with Multitechnique Structural Characterizations.

This paper reports on the quantitative assessment of the oxygen reduction reaction (ORR) electrocatalytic activity of electrodeposited Mn/polypyrrole (PPy) nanocomposites for alkaline aqueous solutions, based on the Rotating Disk Electrode (RDE) method and accompanied by structural characterizations relevant to the establishment of structure-function relationships. The characterization of Mn/PPy films is addressed to the following: (i) morphology, as assessed by Field-Emission Scanning Electron Microscopy (FE-SEM) and Atomic Force Microscope (AFM); (ii) local electrical conductivity, as measured by Scanning Probe Microscopy (SPM); and (iii) molecular structure, accessed by Raman Spectroscopy; these data provide the background against which the electrocatalytic activity can be rationalised. For comparison, the properties of Mn/PPy are gauged against those of graphite, PPy, and polycrystalline-Pt (poly-Pt). Due to the literature lack of accepted protocols for precise catalytic activity measurement at poly-Pt electrode in alkaline solution using the RDE methodology, we have also worked on the obtainment of an intralaboratory benchmark by evidencing some of the time-consuming parameters which drastically affect the reliability and repeatability of the measurement.

Quasi-in-situ single-grain photoelectron microspectroscopy of Co/PPy nanocomposites under oxygen reduction reaction.

This paper reports an investigation into the aging of pyrolyzed cobalt/polypyrrole (Co/PPy) oxygen reduction reaction (ORR) electrocatalysts, based on quasi-in-situ photoelectron microspectroscopy. The catalyst precursor was prepared by potentiostatic reverse-pulse coelectrodeposition from an acetonitrile solution on graphite. Accelerated aging was obtained by quasi-in-situ voltammetric cycling in an acidic electrolyte. Using photoelectron imaging and microspectroscopy of single Co/PPy grains at a resolution of 100 nm, we tracked the ORR-induced changes in the morphology and chemical state of the pristine material, consisting of uniformly distributed ∼20 nm nanoparticles, initially consisting of a mixture of Co(II) and Co(III) oxidation states in almost equal amounts. The evolution of the Co 2p, O 1s, and N 1s spectra revealed that the main effects of aging are a gradual loss of the Co present at the surface and the reduction of Co(III) to Co(II), accompanied by the emergence and growth of a N 1s signal, corresponding to electrocatalytically active C-N sites.

Electrodeposition of Co/CoO nanoparticles onto graphene for ORR electrocatalysis: a study based on micro-X-ray absorption spectroscopy and X-ray fluorescence mapping.

Electrodeposition of graphene-supported Co for ORR electrocatalysts from an acetonitrile solution has been studied by a multi-technique approach, combining a suite of spectroscopic methods with electrochemical measurements, allowing a molecular-level understanding of potentiostatic and pulsed-potential plating processes from the organic solvent onto a freestanding graphene film. The formation of the graphene film by the light-scribe approach has been monitored by Raman spectroscopy; the electrodeposition process has been clarified by cyclic voltammetry and the compositional and chemical-state distribution of Co have been investigated ex situ by soft X-ray absorption spectroscopy and fluorescence mapping, showing that both spatial distribution and valence state are homogeneous and independent of the local current density. The deposit consists in micrometric aggregates of Co/CoO nanoparticles with diameter ca. 30 nm (pulsed) and 200 nm (potentiostatic deposition). Potentiostatic deposition allows to obtain better ORR electrocatalytic perfomance in terms of nnumber of transferred electrons, onset/ half-wave potential and current density.

Electrodeposition of nanostructured bioactive hydroxyapatite-heparin composite coatings on titanium for dental implant applications.

In this paper we describe the one-pot fabrication of hydroxyapatite (HA)-heparin composites by electrodeposition onto Ti substrates and their characterisation in terms of structure, morphology, heparin content and bioactivity. HA coatings are well known and widely applied osteointegration enhancers, but post-implant healing rate in dental applications is still suboptimal: e.g. coagulation control plays a key role and the incorporation of an anticoagulant is considered a highly desirable option. In this study, we have developed an improved, simple and robust growth procedure for single-phase, pure HA-heparin films of thickness 1/3 µm. HA-heparin, forming nanowires, has the ideal morphology for bone mineralisation. Staining assays revealed homogeneous incorporation of sizable amounts of heparin in the composite films. The bioactivities of the HA and HA-heparin coatings on Ti were compared by HeLa cell proliferation/viability tests and found to be enhanced by the presence of the anticoagulant.

Fabrication of a sealed electrochemical microcell for in situ soft X-ray microspectroscopy and testing with in situ co-polypyrrole composite electrodeposition for Pt-free oxygen electrocatalysis.

In this paper we report on the fabrication and testing of a novel concept of sealed electrochemical microcell for in situ soft X-ray microspectroscopy in transmission, dedicated for nonvacuum compatible electrolytes. The microcell, fabricated using ultraviolet lithography, at variance with previous versions of electrochemical wet cells, that featured an optical window glued on top of the electrode system and a very limited electrolyte volume, the device presented here is a single solid block based around a microfabricated channel with fixed optical windows and apt for microfluidic work. Moreover, this cell allows to employ an advanced electrodic geometry developed in our group - so far used only in open electrochemical cells for work with vacuum-compatible electrolytes - also with low-vapor pressure liquids, possibly saturated with the required gases. The cell optimal electrode design allows three-electrode electrochemical control typical of traditional electrochemical experiments. The first electrochemical experiments with this new cell explore the electrochemical growth of a Co-polypyrrole, a composite electrocatalyst material with promising performance to replace the expensive Pt catalyst in fuel-cell oxygen electrodes. Morphological and chemical-state distributions of Co codeposited with polypyrrole has been followed as a function of time and position, yielding unprecedented information on the processes relevant to the synthesis of this catalyst.

In-situ photoelectron microspectroscopy and imaging of electrochemical processes at the electrodes of a self-driven cell.

The challenges in development of solid oxide fuel cells (SOFCs) are reducing their dimensions and increasing their efficiency and durability, which requires physicochemical characterization at micro-scales of the device components during operation conditions. Recently, the unique potential of scanning photoelectron microscopy (SPEM) has been demonstrated by in-situ studies of externally-driven SOFCs, which mimic real devices. Here we overcome the gap between model and real systems using a single-chamber Ni|YSZ|Mn SOFC, supporting a range of self-driven electrochemical reactions in variable gas environments and temperatures. The reported SPEM results, obtained during spontaneous electrochemical processes occurring in reactive gas ambient, demonstrate the chemical evolution of electrodic material, in particular the lateral distribution of the oxidation state and the induced local potential, clearly marking out the electrochemically most active micro-regions of the Ni anode.

Soft X-ray imaging and spectromicroscopy: new insights in chemical state and morphology of the key components in operating fuel-cells.

Fuel cells are one of the most appealing environmentally friendly devices for the effective conversion of chemical energy into electricity and heat, but still there are key barriers to their broad commercialization. In addition to efficiency, a major challenge of fuel-cell technology is the durability of the key components (interconnects, electrodes, and electrolytes) that can be subject to corrosion or undesired morphology and chemical changes occurring under operating conditions. The complementary capabilities of synchrotron-based soft X-ray microscopes in terms of imaging, spectroscopy, spatial and time resolution, and variable probing depths are opening unique opportunities to shed light on the multiple processes occurring in these complex systems at microscopic length scales. This type of information is prerequisite for understanding and controlling the performance and durability of such devices. This paper reviews the most recent efforts in the implementation of these methods for exploring the evolving structure and chemical composition of some key fuel cell components. Recent achievements are illustrated by selected results obtained with simplified versions of proton-exchange fuel-cells (PEFC) and solid-oxide fuel-cells (SOFC), which allow in situ monitoring of the redox reactions resulting in: 1) undesired deposits at interconnects and electrodes (PEFC); 2) material interactions at the electrode-electrolyte interface (PEFC); 3) release of corrosion products to the electrolyte phase (PEFC, and 4) mass-transport processes and structural changes occurring at the high operation temperatures of SOFC and promoted by the polarization.

In situ electrochemical SFG/DFG study of CN- and nitrile adsorption at Au from 1-butyl-1-methyl-pyrrolidinium bis(trifluoromethylsulfonyl) amide ionic liquid([BMP][TFSA]) containing 4-{2-[1-(2-cyanoethyl)-1,2,3,4-tetrahydroquinolin-6-yl]diazenyl} benzonitrile (CTDB) and K[Au(CN)2].

In this paper we report an in situ electrochemical Sum-/Difference Frequency Generation (SFG/DFG) spectroscopy investigation of the adsorption of nitrile and CN⁻ from the ionic liquid 1-butyl-1-methyl-pyrrolidinium bis(trifluoromethylsulfonyl) amide ([BMP][TFSA]) containing 4-{2-[1-(2-cyanoethyl)-1,2,3,4-tetrahydroquinolin-6-yl]-diazenyl}benzonitrile (CTDB) at Au electrodes in the absence and in the presence of the Au-electrodeposition process from K[Au(CN)2]. The adsorption of nitrile and its coadsorption with CN⁻ resulting either from the cathodic decomposition of the dye or from ligand release from the Au(I) cyanocomplex yield potential-dependent single or double SFG bands in the range 2,125-2,140 cm⁻¹, exhibiting Stark tuning values of ca. 3 and 1 cm⁻¹ V⁻¹ in the absence and presence of electrodeposition, respectively. The low Stark tuning found during electrodeposition correlates with the cathodic inhibiting effect of CTDB, giving rise to its levelling properties. The essential insensitivity of the other DFG parameters to the electrodeposition process is due to the growth of smooth Au.

In†situ X-ray spectromicroscopy investigation of the material stability of SOFC metal interconnects in operating electrochemical cells.

The present in situ study of electrochemically induced processes occurring in Cr/Ni bilayers in contact with a YSZ electrolyte aims at a molecular-level understanding of the fundamental aspects related to the durability of metallic interconnects in solid oxide fuel cells (SOFCs). The results demonstrate the potential of scanning photoelectron microspectroscopy and imaging to follow in situ the evolution of the chemical states and lateral distributions of the constituent elements (Ni, Cr, Zr, and Y) as a function of applied cathodic potential in a cell working at 650 °C in 10(-6) mbar O(2) ambient conditions. The most interesting findings are the temperature-induced and potential-dependent diffusion of Ni and Cr, and the oxidation-reduction processes resulting in specific morphology-composition changes in the Ni, Cr, and YSZ areas.

Corrosion of Ni in 1-butyl-1-methyl-pyrrolidinium bis (trifluoromethylsulfonyl) amide room-temperature ionic liquid: an in situ X-ray imaging and spectromicroscopy study.

This paper reports a pioneering application of soft X-ray scanning transmission microscopy (STXM), combined with micro-spot X-ray absorption spectroscopy (XAS) and X-ray fluorescence spectroscopy (XRF), for the investigation of the corrosion of metal electrodes in contact with room-temperature ionic liquids (RTIL). Using an open electrochemical cell in vacuo we explore some fundamental aspects of the aggressiveness of the 1-butyl-1-methyl-pyrrolidinium bis(trifluoromethylsulfonyl)amide ([BMP][TFSA]) RTIL towards Ni under in situ electrochemical polarisation. The possibility of imaging electrochemically-induced morphological features in conjunction with micro-XAS and XRF spectroscopies has provided unprecedented details regarding the space distribution and chemical state of corrosion products.

Electrochemical behaviour and surface characterisation of Zr exposed to an SBF solution containing glycine, in view of dental implant applications.

Zr and Ti alloys are extensively used in the biomedical field owing to their optimal mechanical properties and excellent corrosion resistance. Fully ceramic implants based on zirconia are appealing with respect to the traditional Ti-based metallic ones for several reasons, such as: (i) improved aesthetic impact, (ii) better biocompatibility and (iii) better osteointegration. Nevertheless, fully ceramic implants exhibit serious mechanical and clinical drawbacks, chiefly brittleness and impossibility of post-implant position adjustments. In this paper we propose the novel approach of using a metal-based system, consisting of metallic Zr, for the bulk of the implant and an electrochemically grown zirconia coating, ensuring contact of the ceramic with the biological environment and isolation from the underlying metal. This solution combines the outstanding mechanical properties of the metal in the bulk with the optimal biochemical properties exclusively where they are needed: at the surface. The present paper-focussed on the electrochemical behaviour of the proposed system at the implant-wound and implant-growing bone interface-reports a time-dependent electrochemical corrosion study of zirconia-coated zirconium, performed in the following ways: (i) exposure and measurements in SBF (simulating the inorganic part of human plasma, relevant to wound chemistry), (ii) exposure and measurements in SBF with added glycine (the simplest, ubiquitous amino acid found in proteins), (iii) exposure in SBF with added glycine and measurements in SBF. Electrochemical impedance spectra were measured and interpreted with the equivalent-circuit approach, yielding estimates of the time-variation of the oxide film thickness and resistance were estimated. FT-IR, Surface Raman and VIS reflectance spectroscopies were used to characterise the surface before and after the exposure to SBF solutions. Spectroelectrochemical measurements revealed an higher corrosion resistance of the oxide films formed on Zr in the presence of glycine in the SBF matrix and a smoother electrode surface.

Metallic plate corrosion and uptake of corrosion products by nafion in polymer electrolyte membrane fuel cells.

Nafion contamination by ferrous-alloy corrosion products, resulting in dramatic drops of the Ohmic potential, is a suspected major failure mode of polymer electrolyte membrane fuel cells that make use of metallic bipolar plates. This study demonstrates the potential of scanning transmission X-ray microscopy combined with X-ray absorption and fluorescence microspectroscopy for exploring corrosion processes of Ni and Fe electrodes in contact with a hydrated Nafion film in a thin-layer cell. The imaged morphology changes of the Ni and Fe electrodes and surrounding Nafion film that result from relevant electrochemical processes are correlated to the spatial distribution, local concentration, and chemical state of Fe and Ni species. The X-ray fluorescence maps and absorption spectra, sampled at different locations, show diffusion of corrosion products within the Nafion film only in the case of the Fe electrodes, whereas the Ni electrodes appear corrosion resistant.

Morphological spatial patterns in a reaction diffusion model for metal growth.

In this paper a reaction-diffusion system modelling metal growth processes is considered, to investigate - within the electrodeposition context- the formation of morphological patterns in a finite two-dimensional spatial domain. Nonlinear dynamics of the system is studied from both the analytical and numerical points of view. Phase-space analysis is provided and initiation of spatial patterns induced by diffusion is shown to occur in a suitable region of the parameter space. Investigations aimed at establishing the role of some relevant chemical parameters on stability and selection of solutions are also provided. By the numerical approximation of the equations, simulations are presented which turn out to be in good agreement with experiments for the electrodeposition of Au-Cu and Au-Cu-Cd alloys.