Hierarchical TiO2 Layers Prepared by Plasma Jets.

Heterogeneous photocatalysis of TiO2 is one of the most efficient advanced oxidation processes for water and air purification. Here, we prepared hierarchical TiO2 layers (Spikelets) by hollow-cathode discharge sputtering and tested their photocatalytic performance in the abatement of inorganic (NO, NO2) and organic (4-chlorophenol) pollutant dispersed in air and water, respectively. The structural-textural properties of the photocatalysts were determined via variety of physico-chemical techniques (XRD, Raman spectroscopy, SEM, FE-SEM. DF-TEM, EDAX and DC measurements). The photocatalysis was carried out under conditions similar to real environment conditions. Although the abatement of NO and NO2 was comparable with that of industrial benchmark Aeroxide® TiO2 P25, the formation of harmful nitrous acid (HONO) product on the Spikelet TiO2 layers was suppressed. Similarly, in the decontamination of water by organics, the mineralization of 4-chlorophenol on Spikelet layers was interestingly the same, although their reaction rate constant was three-times lower. The possible explanation may be the more than half-magnitude order higher external quantum efficacy (EQE) compared to that of the reference TiO2 P25 layer. Therefore, such favorable kinetics and reaction selectivity, together with feasible scale-up, make the hierarchical TiO2 layers very promising photocatalyst which can be used for environmental remediation.

Ultrasonic Pretreatment as a Tool for the Preparation of Low-Defect Zeolite Mordenite.

The effects of the ultrasonic (US) pretreatment of synthesis gel for the preparation of mordenite zeolite were studied in comparison with the classical stirring method. Even though the US pretreatment was performed before the hydrothermal crystallization, it significantly affected the properties of the obtained mordenite crystals. The US-assisted procedure resulted in a material with improved textural characteristics, in particular, the micropore volume accessible for nitrogen molecules in the as-made form. On the other hand, mordenite prepared with the classical stirring method demonstrated comparable sorption properties only after a postsynthetic treatment. Moreover, in the case of US-pretreated mordenite, altered crystal shape and more homogeneous morphology were observed. 29Si magic-angle spinning nuclear magnetic resonance (MAS NMR) demonstrated that the US pretreatment introduced structural changes on the atomic level, resulting in fewer defects (reflected in the number of silanol groups) and less pore blockage (affected by Na+ cations) for the as-made sample.

Mechanochemical Pretreatment for Efficient Solvent-Free Synthesis of SSZ-13 Zeolite.

The economical and environmentally benign synthesis of SSZ-13 zeolite was possible due to the mechanochemical activation of dry reagents by planetary mill. Contrary to manual grinding in a mortar, the proposed automatized approach is scalable and reproducible. This solvent-free process provided a huge gain in product/gel ratios, significantly minimized reaction space and organic structure-directing agent use, and allowed for the elimination of agitation. Obtained materials were comparable to the product of "classical" syntheses. The use of different silica sources resulted in SSZ-13 zeolites with various characteristics: different Si/Al ratio and crystal size.

Interaction of human osteoblast-like Saos-2 cells with stainless steel coated by silicalite-1 films.

This paper investigates the interaction of human osteoblast-like Saos-2 cells with stainless steel covered by a film of densely inter-grown silicalite-1 crystals with defined outer and inner surfaces. The chemical composition of this film, labeled as SF(RT), was tuned by heat treatment at 300°C and 500°C (labeled as SF(300) and SF(500), respectively) and characterized by X-ray photoelectron spectroscopy (XPS), water drop contact angle (WCA) measurements and scanning electron microscopy (SEM). The number, the spreading area and the activity of alkaline phosphatase of human osteoblast-like Saos-2 cells in cultures on the silicalite-1 film were affected by the chemical composition of its outer surface and by its micro-porous structure. The number and the spreading area of the adhered osteoblast-like cells on day 1 was highest on the surface of SF(RT) relative to their adhesion and spreading on a glass cover slip due to the SF(RT) topology. However, SF(300) markedly supported cell growth during days 3 and 7 after seeding.

Electrolytic processes in various degrees of dispersion.

While following voltammetric behavior of ultrafine metallic powders, we realized that the results obtained with six metals (Al, Fe, Ni, Cu, Mo, and W) were providing us with material for treating the connection between electroactivity and the state of dispersion of matter. The electroactive species were metallic oxides formed spontaneously on surfaces of the metallic powder particles, and we could follow their electrochemical reactivity in the states of coarse and fine suspensions, colloids, and true solutions. Each state of dispersion can be characterized by a distinctive form of electroactivity, which we illustrated by experimental results with all six metals.