Additive Manufacturing of Wet-Spun Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)-Based Scaffolds Loaded with Hydroxyapatite.

Tissue engineering represents an advanced therapeutic approach for the treatment of bone tissue defects. Polyhydroxyalkanoates are a promising class of natural polymers in this context thanks to their biocompatibility, processing versatility, and mechanical properties. The aim of this study is the development by computer-aided wet-spinning of novel poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)-based composite scaffolds for bone engineering. In particular, PHBV scaffolds are loaded with hydroxyapatite (HA), an osteoinductive ceramic, in order to tailor their biological activity and mechanical properties. PHBV blending with poly(lactide-co-glycolide) (PLGA) is also explored to increase the processing properties of the polymeric mixture used for composite scaffold fabrication. Different HA percentages, up to 15% wt., can be loaded into the PHBV or PHBV/PLGA scaffolds without compromising their interconnected porous architecture, as well as the polymer morphological and thermal properties, as demonstrated by scanning electron microscopy, thermogravimetric analysis, and differential scanning calorimetry. In addition, HA loading results in increased scaffold compressive stiffness to levels comparable to those of trabecular bone tissue, as well as in higher in vitro MC3T3-E1 cell viability and production of mineralized extracellular matrix, in comparison to what observed for unloaded scaffolds. The observed mechanical and biological properties suggest the suitability of the developed scaffolds for bone engineering.

Additive manufacturing of wet-spun chitosan/hyaluronic acid scaffolds for biomedical applications.

Additive manufacturing (AM) holds great potential for processing natural polymer hydrogels into 3D scaffolds exploitable for tissue engineering and in vitro tissue modelling. The aim of this research activity was to assess the suitability of computer-aided wet-spinning (CAWS) for AM of hyaluronic acid (HA)/chitosan (Cs) polyelectrolyte complex (PEC) hydrogels. A post-printing treatment based on HA chemical cross-linking via transesterification with poly(methyl vinyl ether-alt-maleic acid) (PMVEMA) was investigated to enhance the structural stability of the developed scaffolds in physiological conditions. PEC formation and the esterification reaction were investigated by infrared spectroscopy, thermogravimetric analysis, evolved gas analysis-mass spectrometry, and differential scanning calorimetry measurements. In addition, variation of PMVEMA concentration in the cross-linking medium was demonstrated to strongly influence scaffold water uptake and its stability in phosphate buffer saline at 37 °C. The in vitro cytocompatibility of the developed hydrogels was demonstrated by employing the murine embryo fibroblast Balb/3T3 clone A31 cell line, highlighting that PMVEMA cross-linking improved scaffold cell colonization. The results achieved demonstrated that the developed hydrogels represent suitable 3D scaffolds for long term cell culture experiments.

Additive Manufacturing of Wet-Spun Polysulfone Medical Implants.

Research on additive manufacturing (AM) of high-performance polymers provides novel materials and technologies for advanced applications in different sectors, such as aerospace and biomedical engineering. The present article is contextualized in this research trend by describing a novel AM protocol for processing a polysulfone (PSU)/N-methyl-2-pyrrolidone (NMP) solution into medical implant prototypes. In particular, an AM technique involving the patterned deposition of the PSU/NMP mixture in a coagulation bath was employed to fabricate PSU implants with different predefined shape, fiber diameter, and macropore size. Scanning electron microscopy (SEM) analysis highlighted a fiber transversal cross-section morphology characterized by a dense external skin layer and an inner macroporous/microporous structure, as a consequence of the nonsolvent-induced polymer solidification process. Physical-chemical and thermal characterization of the fabricated samples demonstrated that PSU processing did not affect its macromolecular structure and glass-transition temperature, as well as that after post-processing PSU implants did not contain residual solvent or nonsolvent. Mechanical characterization showed that the developed PSU scaffold tensile and compressive modulus could be changed by varying the macroporous architecture. In addition, PSU scaffolds supported the in vitro adhesion and proliferation of the BALB/3T3 clone A31 mouse embryo cell line. These findings encourage further research on the suitability of the developed processing method for the fabrication of customized PSU implants.

Further Step in the Transition from Conventional Plasticizers to Versatile Bioplasticizers Obtained by the Valorization of Levulinic Acid and Glycerol.

In the last two decades, the use of phthalates has been restricted worldwide due to their well-known toxicity. Nonetheless, phthalates are still widely used for their versatility, high plasticization effect, low cost, and lack of valuable alternatives. This study presents the fully bio-based and versatile glycerol trilevulinate plasticizer (GT) that was obtained by the valorization of glycerol and levulinic acid. The mild-conditions and solvent-free esterification used to synthesize GT was optimized by investigating the product by Fourier transform infrared and NMR spectroscopy. An increasing content of GT, from 10 to 40 parts by weight per hundred parts of resin (phr), was tested with poly(vinyl chloride), poly(3-hydroxybutyrate), poly(3-hydroxybutyrate-co-3-hydroxyvalerate), poly(lactic acid), and poly(caprolactone), which typically present complicated processability and/or mechanical properties. GT produced a significant plasticization effect on both amorphous and semicrystalline polymers, reducing their glass-transition temperature and stiffness, as observed by differential scanning calorimetry measurements and tensile tests. Remarkably, GT also decreased both the melting temperature and crystallinity degree of semicrystalline polymers. Furthermore, GT underwent enzyme-mediated hydrolysis to its initial constituents, envisioning a promising prospective for environmental safety and upcycling. Furthermore, 50% inhibitory concentration (IC50) tests, using mouse embryo fibroblasts, proved that GT is an unharmful alternative plasticizer, which makes it potentially applicable in the biomedical field.

Synthesis, Characterization and Photoactivation Studies on the Novel Pt(IV)-Based [Pt(OCOCH3)3(phterpy)] Complex.

Photoactivatable Pt(IV) prodrugs represent nowadays an intriguing class of potential metal-based drugs, endowed with more chemical inertness in their oxidized form and better selectivity for the target with respect to the clinically established Pt(II) compounds. In fact, they have the possibility to be reduced by light irradiation directly at the site of interest. For this reason, we synthesized a new Pt(IV) complex, [Pt(OCOCH3)3(4'-phenyl-2,2':6',2''-terpyridine)][CF3SO3] (1), that is well soluble in aqueous medium and totally unreactive towards selected model biomolecules until its reduction. The highlight of this work is the rapid and efficient photoreduction of 1 with visible light (460 nm), which leads to its reactive Pt(II) analogue. This behavior was made possible by taking advantage of an efficient catalytic system based on flavin and NADH, which is naturally present in the cellular environment. As a comparison, the reduction of 1 was also studied with simple UV irradiation, but both UV-Vis spectrophotometry and 1H-NMR spectrometry showed that the flavin-catalyzed reduction with visible light was faster. Lastly, the reactivity against two representative biological targets, i.e., human serum albumin and one monofilament oligonucleotide fragment, was evaluated by high-resolution mass spectrometry. The results clearly pointed out that the prodrug 1 did not interact with these targets until its photoreduction to the Pt(II) analogue.

The choice of µ-vinyliminium ligand substituents is key to optimize the antiproliferative activity of related diiron complexes.

Diiron vinyliminium complexes constitute a large family of organometallics displaying a promising anticancer potential. The complexes [Fe2Cp2(CO)(µ-CO){µ-η1:η3-C(R3)C(R4)CN(R1)(R2)}]CF3SO3 (2a-c, 4a-d) were synthesized, assessed for their behavior in aqueous solutions (D2O solubility, Log Pow, stability in D2O/Me2SO-d6 mixture at 37°C over 48 h) and investigated for their antiproliferative activity against A2780 and A2780cisR ovarian cancer cell lines and the nontumoral one Balb/3T3 clone A31. Cytotoxicity data collected for 50 vinyliminium complexes were correlated with the structural properties (i.e. the different R1-R4 substituents) using the partial least squares methodology. A clear positive correlation emerged between the octanol-water partition coefficient and the relative antiproliferative activity on ovarian cancer cell lines, both of which appear as uncorrelated to the cancer cell selectivity. However, the different effects played by the R1-R4 substituents allow tracing guidelines for the development of novel, more effective compounds. Based on these results, three additional complexes (4p-r) were designed, synthesized and biologically investigated, revealing their ability to hamper thioredoxin reductase enzyme and to induce cancer cell production of reactive oxygen species.

Additive Manufacturing of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/Poly(D,L-lactide-co-glycolide) Biphasic Scaffolds for Bone Tissue Regeneration.

Polyhydroxyalkanoates are biopolyesters whose biocompatibility, biodegradability, environmental sustainability, processing versatility, and mechanical properties make them unique scaffolding polymer candidates for tissue engineering. The development of innovative biomaterials suitable for advanced Additive Manufacturing (AM) offers new opportunities for the fabrication of customizable tissue engineering scaffolds. In particular, the blending of polymers represents a useful strategy to develop AM scaffolding materials tailored to bone tissue engineering. In this study, scaffolds from polymeric blends consisting of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and poly(D,L-lactide-co-glycolide) (PLGA) were fabricated employing a solution-extrusion AM technique, referred to as Computer-Aided Wet-Spinning (CAWS). The scaffold fibers were constituted by a biphasic system composed of a continuous PHBV matrix and a dispersed PLGA phase which established a microfibrillar morphology. The influence of the blend composition on the scaffold morphological, physicochemical, and biological properties was demonstrated by means of different characterization techniques. In particular, increasing the content of PLGA in the starting solution resulted in an increase in the pore size, the wettability, and the thermal stability of the scaffolds. Overall, in vitro biological experiments indicated the suitability of the scaffolds to support murine preosteoblast cell colonization and differentiation towards an osteoblastic phenotype, highlighting higher proliferation for scaffolds richer in PLGA.

Polymeric Hydrogels for In Vitro 3D Ovarian Cancer Modeling.

Ovarian cancer (OC) grows and interacts constantly with a complex microenvironment, in which immune cells, fibroblasts, blood vessels, signal molecules and the extracellular matrix (ECM) coexist. This heterogeneous environment provides structural and biochemical support to the surrounding cells and undergoes constant and dynamic remodeling that actively promotes tumor initiation, progression, and metastasis. Despite the fact that traditional 2D cell culture systems have led to relevant medical advances in cancer research, 3D cell culture models could open new possibilities for the development of an in vitro tumor microenvironment more closely reproducing that observed in vivo. The implementation of materials science and technology into cancer research has enabled significant progress in the study of cancer progression and drug screening, through the development of polymeric scaffold-based 3D models closely recapitulating the physiopathological features of native tumor tissue. This article provides an overview of state-of-the-art in vitro tumor models with a particular focus on 3D OC cell culture in pre-clinical studies. The most representative OC models described in the literature are presented with a focus on hydrogel-based scaffolds, which guarantee soft tissue-like physical properties as well as a suitable 3D microenvironment for cell growth. Hydrogel-forming polymers of either natural or synthetic origin investigated in this context are described by highlighting their source of extraction, physical-chemical properties, and application for 3D ovarian cancer cell culture.

Self-Assembled Amphiphilic Fluorinated Random Copolymers for the Encapsulation and Release of the Hydrophobic Combretastatin A-4 Drug.

Water-soluble amphiphilic random copolymers composed of tri(ethylene glycol) methacrylate (TEGMA) or poly(ethylene glycol) methyl ether methacrylate (PEGMA) and perfluorohexylethyl acrylate (FA) were synthesized by ARGET-ATRP, and their self-assembling and thermoresponsive behavior in water was studied by dynamic light scattering (DLS) and UV-vis spectroscopy. The copolymer ability to self-fold in single-chain nano-sized structures (unimer micelles) in aqueous solutions was exploited to encapsulate Combretastatin A-4 (CA-4), which is a very hydrophobic anticancer drug. The cloud point temperature (Tcp) was found to linearly decrease with increasing drug concentration in the drug/copolymer system. Moreover, while CA-4 was preferentially incorporated into the unimer micelles of TEGMA-ran-FA, the drug was found to induce multi-chain, submicro-sized aggregation of PEGMA-ran-FA. Anyway, the encapsulation efficiency was very high (≥81%) for both copolymers. The drug release was evaluated in PBS aqueous solutions both below and above Tcp for TEGMA-ran-FA copolymer and below Tcp, but at two different drug loadings, for PEGMA-ran-FA copolymer. In any case, the release kinetics presented similar profiles, characterized by linear trends up to ≈10-13 h and ≈7 h for TEGMA-ran-FA and PEGMA-ran-FA, respectively. Then, the release rate decreased, reaching a plateau. The release from TEGMA-ran-FA was moderately faster above Tcp than below Tcp, suggesting that copolymer thermoresponsiveness increased the release rate, which occurred anyway by diffusion below Tcp. Cytotoxicity tests were carried out on copolymer solutions in a wide concentration range (5-60 mg/mL) at 37 °C by using Balb/3T3 clone A31 cells. Interestingly, it was found that the concentration-dependent micro-sized aggregation of the amphiphilic random copolymers above Tcp caused a sort of "cellular asphyxiation" with a loss of cell viability clearly visible for TEGMA-ran-FA solutions (Tcp below 37 °C) with higher copolymer concentrations. On the other hand, cells in contact with the analogous PEGMA-ran-FA (Tcp above 37 °C) presented a very good viability (≥75%) with respect to the control at any given concentration.

A Strategy to Conjugate Bioactive Fragments to Cytotoxic Diiron Bis(cyclopentadienyl) Complexes.

A series of bioactive molecules were synthesized from the condensation of aspirin or chlorambucil with terminal alkynes bearing alcohol or amine substituents. Insertion of the resulting alkynes into the iron-carbyne bond of readily accessible diiron bis(cyclopentadienyl) µ-aminocarbyne complexes, [1a,b]CF3SO3, afforded novel diiron complexes with a bridging vinyliminium ligand, [2-10]CF3SO3, functionalized with a bioactive moiety. All compounds were characterized by elemental analysis and IR and multinuclear NMR spectroscopy and in three cases by single-crystal X-ray diffraction. Moreover, the D2O solubility, stability in D2O and cell culture media, and octanol-water partition coefficients of diiron complexes were determined spectroscopically. The cytotoxicity of the complexes was assessed in the tumorigenic A2780 and A2780cisR and the nontumorigenic HEK 293T cell lines. Some complexes exhibit high potency and the ability to overcome resistance in A2780cisR cells (aspirin complexes) or high selectivity relative to HEK 293T cells (chlorambucil complexes). Further studies indicate that the complexes significantly trigger intracellular ROS production, irrespective of the nature of the bioactive fragment. DNA alkylation and protein binding studies were also undertaken.

Anticancer Diiron Vinyliminium Complexes: A Structure-Activity Relationship Study.

A series of 16 novel diiron complexes of general formula [Fe2Cp2(CO)(µ-CO){µ-η1:η3-C(R')C(R″)CN(R)(Y)}]CF3SO3 (2-7), bearing different substituents on the bridging vinyliminium ligand, was synthesized in 69-95% yields from the reactions of diiron µ-aminocarbyne precursors with various alkynes. The products were characterized by elemental analysis, IR, 1H and 13C NMR spectroscopy; moreover the X-ray structures of 2c (R = Y = CH2Ph, R' = R″ = Me) and 3a (R = CH2CH=CH2, Y = R' = Me, R″ = H) were ascertained by single-crystal X-ray diffraction studies. NMR and UV-Vis methods were used to assess the D2O solubility, the stability in aqueous solution at 37 °C and the octanol-water partition coefficients of the complexes. A screening study evidenced a potent cytotoxicity of 2-7 against the A2780 cancer cell line, with a remarkable selectivity compared to the nontumoral Balb/3T3 cell line; complex 4c (R = Cy, Y = R' = R″ = Me) revealed as the most performant of the series. The antiproliferative activity of a selection of complexes was also assessed on the cisplatin-resistant A2780cisR cancer cell line, and these complexes were capable of inducing a significant ROS production. Moreover, ESI-MS experiments indicated the absence of interaction of selected complexes with cytochrome c and the potentiality to inhibit the thioredoxin reductase enzyme (TrxR).

Antivirulence Properties of a Low-Molecular-Weight Quaternized Chitosan Derivative against Pseudomonas aeruginosa.

The co-occurrence of increasing rates of resistance to current antibiotics and the paucity of novel antibiotics pose major challenges for the treatment of bacterial infections. In this scenario, treatments targeting bacterial virulence have gained considerable interest as they are expected to exert a weaker selection for resistance than conventional antibiotics. In a previous study, we demonstrated that a low-molecular-weight quaternized chitosan derivative, named QAL, displays antibiofilm activity against the major pathogen Pseudomonas aeruginosa at subinhibitory concentrations. The aim of this study was to investigate whether QAL was able to inhibit the production of relevant virulence factors of P. aeruginosa. When tested in vitro at subinhibiting concentrations (0.31-0.62 mg/mL), QAL markedly reduced the production of pyocyanin, pyoverdin, proteases, and LasA, as well as inhibited the swarming motility of three out of four P. aeruginosa strains tested. Furthermore, quantitative reverse transcription PCR (qRT-PCR) analyses demonstrated that expression of lasI and rhlI, two QS-related genes, was highly downregulated in a representative P. aeruginosa strain. Confocal scanning laser microscopy analysis suggested that FITC-labelled QAL accumulates intracellularly following incubation with P. aeruginosa. In contrast, the reduced production of virulence factors was not evidenced when QAL was used as the main polymeric component of polyelectrolyte-based nanoparticles. Additionally, combination of sub-MIC concentrations of QAL and tobramycin significantly reduced biofilm formation of P. aeruginosa, likely due to a synergistic activity towards planktonic bacteria. Overall, the results obtained demonstrated an antivirulence activity of QAL, possibly due to polymer intracellular localization and QS-inhibition, and its ability to inhibit P. aeruginosa growth synergizing with tobramycin.

Adhesion of fibroblast cells on thin films representing surfaces of polymeric scaffolds of human urethra rationalized by molecular models of integrin binding: cell adhesion on polymeric scaffolds for regenerative medicine.

This work combines experimental and computational study of Balb/3T3 clone A31 mouse embryo fibroblasts cell line adhesion and proliferation on fourteen different polymeric surfaces prepared from poly(dioxanone) (PDO), poly(glycolic acid) (PGA), poly(hydroxybutyrate) (PHB), and poly(L-lactic acid) (PLA), and their 1:1 mixtures. The study was done with the aim to explore the attractive interactions between various synthetic biomaterials and simple model of the cell attachment mechanism involving the trans-membrane protein integrin. The considered polymeric biodegradable biomaterials can be used as scaffolds for tissue engineering and regenerative urology. During the growth of new tissue, the polymer scaffold is replaced by the extracellular matrix (ECM) synthetized by the proliferating cells. The adhesion and proliferation experiments were done on thin polymer films produced by solvent casting. The computational approach used 3D molecular models of two layers of ordered parallel polymeric fibres, which formed quasi-planar nanosized models of the scaffold surface. Experimental data showed that PGA based polymer films promote the cell adhesion. Cell proliferation testing, performed by incubating the fibroblast cells with the studied polymer films, disclosed that PLA, PHB/PLA and PHB/PGA systems are able to support proliferation of Balb/3T3 clone A31 cells equal to the plain glass. Relative interaction energies between 3D models of polymeric films and the α2 I domain of the cell adhesion receptor integrin α2ß1 computed by molecular mechanics suggest that plain polymers PGA, PDO and mixtures PDO/PGA, PHB/PGA, and especially PGA/PLA display elevated affinity to the cell-attachment protein, which confirms the experimental observations. The combination of experimental and modelling approach can assist rational design of synthetic polymeric biomaterial for scaffolds of artificial human urethra that can be efficiently colonized by cells.

Mono-, Di- and Tetra-iron Complexes with Selenium or Sulphur Functionalized Vinyliminium Ligands: Synthesis, Structural Characterization and Antiproliferative Activity.

A series of diiron/tetrairon compounds containing a S- or a Se-function (2a-d, 4a-d, 5a-b, 6), and the monoiron [FeCp(CO){SeC1(NMe2)C2HC3(Me)}] (3) were prepared from the diiron µ-vinyliminium precursors [Fe2Cp2(CO)( µ-CO){ µ-η1: η3-C3(R')C2HC1N(Me)(R)}]CF3SO3 (R = R' = Me, 1a; R = 2,6-C6H3Me2 = Xyl, R' = Ph, 1b; R = Xyl, R' = CH2OH, 1c), via treatment with S8 or gray selenium. The new compounds were characterized by elemental analysis, IR and multinuclear NMR spectroscopy, and structural aspects were further elucidated by DFT calculations. The unprecedented metallacyclic structure of 3 was ascertained by single crystal X-ray diffraction. The air-stable compounds (3, 4a-d, 5a-b, 6) display fair to good stability in aqueous media, and thus were assessed for their cytotoxic activity towards A2780, A2780cisR, and HEK-293 cell lines. Cyclic voltammetry, ROS production and NADH oxidation studies were carried out on selected compounds to give insights into their mode of action.

Poly(3-hydroxybutyrate-co-3-hydroxyexanoate) scaffolds with tunable macro- and microstructural features by additive manufacturing.

Polymer microstructural engineering by additive manufacturing (AM) represents a powerful tool to functionalize tissue engineering scaffolds. This article reports on the processing of polymer/solvent/non-solvent ternary mixtures through their extrusion in a non-solvent bath as an innovative phase inversion-based AM approach to engineer poly(3-hydroxybutyrate-co-3-hydroxyexanoate) (PHBHHx) scaffolds porosity. The processing of PHBHHx mixtures with different chloroform/ethanol ratio into scaffolds characterized by a dual-scale porosity is described by highlighting how an interconnected network of macropores can be endowed with a tunable microporosity, formed a result of the phase inversion process governing polymer solidification. In particular, the study demonstrates that varying the non-solvent percentage in the ternary mixture represents an effective means to tailor the macropores size along scaffold vertical cross-section and the local micropores concentration in the polymer matrix. These structural changes are demonstrated to significantly affect scaffold overall porosity and tensile modulus, as well as its ability to support in vitro the proliferation of preosteoblast cells. The developed manufacturing strategy combines an advanced material engineering method effective on dual-scale size levels, with a modern approach to the sustainable processing of naturally-derived polyesters that minimizes the employment of halogenated solvents.

Anticancer Potential of Diiron Vinyliminium Complexes.

Invited for the cover of this issue is the group of Fabio Marchetti at the Università di Pisa and Paul J. Dyson at Ecole Polytechnique Fédérale de Lausanne (EPFL). Read the full text of the article at 10.1002/chem.201902885.

pH-Responsive Carboxymethylcellulose Nanoparticles for 68Ga-WBC Labeling in PET Imaging.

Carboxymethylcellulose (CMC) is a well-known pharmaceutical polymer, recently gaining attention in the field of nanomedicine, especially as a polyelectrolyte agent for the formation of complexes with oppositely charged macromolecules. Here, we report on the application of pH-sensitive pharmaceutical grade CMC-based nanoparticles (NP) for white blood cells (WBC) PET imaging. In this context and as an alternative to 99mTc-HMPAO SPECT labeling, the use of 68Ga3+ as PET radionuclide was investigated since, at early time points, it could provide the greater spatial resolution and patient convenience of PET tomography over SPECT clinical practices. Two operator-friendly kit-type formulations were compared, with the intention of radiolabeling within a short time (10 min), under mild conditions (physiological pH, room temperature) and in agreement with the actual clinically applied guidelines. NP were labeled by directly using 68Ga3+ eluted in HCL 0.05 N, from hospital suited 68Ge/68Ga generator and in absence of chelator. The first kit type approach involved the application of 68Ga3+ as an ionotropic gelation agent for in-situ forming NP. The second kit type approach concerned the re-hydration of a proper freeze-dried injectable NP powder. pH-sensitive NP with 250 nm average diameter and 80% labeling efficacy were obtained. The NP dispersant medium, including a cryoprotective agent, was modulated in order to optimize the Zeta potential value (-18 mV), minimize the NP interaction with serum proteins and guarantee a physiological environment for WBC during NP incubation. Time-dependent WBC radiolabeling was correlated to NP uptake by using both confocal and FT-IR microscopies. The ready to use lyophilized NP formulation approach appears promising as a straightforward 68Ga-WBC labeling tool for PET imaging applications.

Anticancer Potential of Diiron Vinyliminium Complexes.

Although ferrocene derivatives have attracted considerable attention as possible anticancer agents, the medicinal potential of diiron complexes has remained largely unexplored. Herein, we describe the straightforward multigram-scale synthesis and the antiproliferative activity of a series of diiron cyclopentadienyl complexes containing bridging vinyliminium ligands. IC50 values in the low-to-mid micromolar range were determined against cisplatin sensitive and resistant human ovarian carcinoma (A2780 and A2780cisR) cell lines. Notable selectivity towards the cancerous cells lines compared to the non-tumoral human embryonic kidney (HEK-293) cell line was observed for selected compounds. The activity seems to be multimodal, involving reactive oxygen species (ROS) generation and, in some cases, a fragmentation process to afford monoiron derivatives. The large structural variability, amphiphilic character and good stability in aqueous media of the diiron vinyliminium complexes provide favorable properties compared to other widely studied classes of iron-based anticancer candidates.

Bioactive glasses and glass-ceramics versus hydroxyapatite: Comparison of angiogenic potential and biological responsiveness.

Different bioactive glasses (BGs), bioceramics, and their composites were extensively analyzed in terms of biological responsiveness and angiogenic potential. In particular several inorganic materials were considered, namely the widely used 45S5 BG, an experimental BG with low tendency to crystallize, other three experimental BGs doped with strontium and/or magnesium, a commercial hydroxyapatite (HA), and two BG-HA composites (with varying percentages of BG and HA). All these materials were ad hoc prepared and in vitro tested by means of an extensive biological analysis, such as MC3T3-E1 cell viability and proliferation by direct contact assay, alkaline phosphatase activity, mineralized matrix deposition analysis by alizarin red staining, as well as evaluation of angiogenic potential and vascular endothelial growth factor release using ST2 cells. Thus, this investigation allows gaining a deeper insight into the biological performance of different inorganic material categories, and to critically compare the different possible solutions, as bone/tissue substitutes for enhanced healing and repair, in terms of bioactivity and regenerative potential.

Photocytotoxic Pt(iv) complexes as prospective anticancer agents.

The use of Pt(iv) complexes as potential anticancer drugs is attractive, because they have higher stability and less side effects than Pt(ii) compounds. Moreover, some Pt(iv) complexes can also be activated with light, opening an avenue to photochemotherapy. Our purpose is to widen the library of photoactivatable Pt(iv)-based prodrugs and here we report on the oxidation of the Pt(ii) compound [PtCl(4'-phenyl-2,2':6',2''-terpyridine)][CF3SO3] (1) with PhICl2 or H2O2. The synthetic procedure avoids the formation of multiple species: the treatment with PhICl2 produces the Pt(iv) complex with axial chlorides, [PtCl3(4'-phenyl-2,2':6',2''-terpyridine)][CF3SO3] (2), while H2O2 oxidation and post-synthesis carboxylation produce [Pt(OCOCH3)2Cl(4'-phenyl-2,2':6',2''-terpyridine)][CF3SO3] (3), bearing acetates in the axial positions. 2 and 3 are stable in physiological-like buffers and in DMSO in the dark, but undergo photoreduction to 1 upon irradiation at 365 nm. Their stability toward reduction is a fundamental parameter to consider: cyclic voltammetry experiments show that the 2 electron reduction Pt(iv) → Pt(ii) occurs at a more negative potential for 3, because of the greater stabilization provided by the acetate axial groups; noteworthily, 3 is stable for hours also in the presence of mM concentration of glutathione. The cytotoxicity of 2 and 3 toward A2780 and A2780cis cell lines reveals that 3 is the least toxic in the dark, but is able to produce cytotoxic effects far higher than cisplatin when irradiated. To shed light on the mechanistic aspects, the interaction with protein and DNA models has been explored through high-resolution mass spectrometry revealing that 2 and 3 behave as prodrugs, but are able to bind to biological targets only after irradiation.