Quantification of 37Ar emanation fractions from irradiated natural rock samples and field applications.

Underground-produced 37Ar can be used for underground nuclear explosions (UNE) detection and for groundwater dating. The quantification of the emanation, that is the fraction of activity produced in the rock that escapes to the pore space, is essential for predicting the background activity expected in natural environments. We propose an experiment in which artificial CaCO3 powder and natural rock particles are irradiated with neutrons in a routinely operated medical cyclotron, whose energy spectrum is experimentally measured. The produced activity was quantified and compared with the emanated activity to determine the emanating fraction. The results showed consistent and reproducible patterns with a dominance of the recoil process at small scales (<2 mm). We observed emanation values ≤1% with a dependency on the grain size and the inner geometry of particles. Soil weathering and the presence of water increased the recoil emanation. The atoms produced that were instantaneously recoiled in the intra- or inter-granular pore space left macroscopic samples by diffusion on timescales of days to weeks (Deff = 10-12 - 10-16 m2 s-1). This diffusive transport determines the activity that prevails in the fluid-filled pore space accessible for groundwater or soil gas sampling.

Optimization of 68Ga production at an 18 MeV medical cyclotron with solid targets by means of cross-section measurement of 66Ga, 67Ga and 68Ga.

The future development of personalized nuclear medicine relies on the availability of novel medical radionuclides. In particular, radiometals are attracting considerable interest since they can be used to label both proteins and peptides. Among them, the ß+-emitter 68Ga is widely used in nuclear medicine for positron emission tomography (PET). It is used in theranostics as the diagnostic partner of the therapeutic ß--emitters 177Lu and 90Y for the treatment of a wide range of diseases, including prostate cancer. Currently, 68Ga is usually obtained via 68Ge/68Ga generators. However, their availability, high price and limited produced radioactivity per elution are a major barrier for a wider use of the 68Ga-based diagnostic radiotracers. A promising solution is the production of 68Ga by means of proton irradiation of enriched 68Zn liquid or solid targets. Along this line, a research program is ongoing at the Bern medical cyclotron, equipped with a solid target station. In this paper, we report on the measurements of 68Ga, 67Ga and 66Ga production cross-sections using natural Zn and enriched 68Zn material, which served as the basis to perform optimized 68Ga production tests with enriched 68Zn solid targets.

Cyclotron production and radiochemical purification of terbium-155 for SPECT imaging.

BACKGROUND: Terbium-155 [T1/2 = 5.32 d, Eγ = 87 keV (32%) 105 keV (25%)] is an interesting radionuclide suitable for single photon emission computed tomography (SPECT) imaging with potential application in the diagnosis of oncological disease. It shows similar decay characteristics to the clinically established indium-111 and would be a useful substitute for the diagnosis and prospective dosimetry with biomolecules that are afterwards labeled with therapeutic radiolanthanides and pseudo-radiolanthanides, such as lutetium-177 and yttrium-90. Moreover, terbium-155 could form part of the perfect "matched pair" with the therapeutic radionuclide terbium-161, making the concept of true radiotheragnostics a reality. The aim of this study was the investigation of the production of terbium-155 via the 155Gd(p,n)155Tb and 156Gd(p,2n)155Tb nuclear reactions and its subsequent purification, in order to obtain a final product in quantity and quality sufficient for preclinical application. The 156Gd(p,2n)155Tb nuclear reaction was performed with 72 MeV protons (degraded to ~ 23 MeV), while the 155Gd(p,n)155Tb reaction was degraded further to ~ 10 MeV, as well as performed at an 18 MeV medical cyclotron, to demonstrate its feasibility of production. RESULT: The 156Gd(p,2n)155Tb nuclear reaction demonstrated higher production yields of up to 1.7 GBq, however, lower radionuclidic purity when compared to the final product (~ 200 MBq) of the 155Gd(p,n)155Tb nuclear reaction. In particular, other radioisotopes of terbium were produced as side products. The radiochemical purification of terbium-155 from the target material was developed to provide up to 1.0 GBq product in a small volume (~ 1 mL 0.05 M HCl), suitable for radiolabeling purposes. The high chemical purity of terbium-155 was proven by radiolabeling experiments at molar activities up to 100 MBq/nmol. SPECT/CT experiments were performed in tumor-bearing mice using [155Tb]Tb-DOTATOC. CONCLUSION: This study demonstrated two possible production routes for high activities of terbium-155 using a cyclotron, indicating that the radionuclide is more accessible than the exclusive mass-separated method previously demonstrated. The developed radiochemical purification of terbium-155 from the target material yielded [155Tb]TbCl3 in high chemical purity. As a result, initial cell uptake investigations, as well as SPECT/CT in vivo studies with [155Tb]Tb-DOTATOC, were successfully performed, indicating that the chemical separation produced a product with suitable quality for preclinical studies.

Study of the radioactivity induced in air by a 15-MeV proton beam.

Radioactivity induced by a 15-MeV proton beam extracted into air was studied at the beam transport line of the 18-MeV cyclotron at the Bern University Hospital (Inselspital). The produced radioactivity was calculated and measured by means of proportional counters located at the main exhaust of the laboratory. These devices were designed for precise assessment of air contamination for radiation protection purposes. The main produced isotopes were (11)C, (13)N and (14)O. Both measurements and calculations correspond to two different irradiation conditions. In the former, protons were allowed to travel for their full range in air. In the latter, they were stopped at the distance of 1.5 m by a beam dump. Radioactivity was measured continuously in the exhausted air starting from 2 min after the end of irradiation. For this reason, the short-lived (14)O isotope gave a negligible contribution to the measured activity. Good agreement was found between the measurements and the calculations within the estimated uncertainties. Currents in the range of 120-370 nA were extracted in air for 10-30 s producing activities of 9-22 MBq of (11)C and (13)N. The total activities for (11)C and (13)N per beam current and irradiation time for the former and the latter irradiation conditions were measured to be (3.60 ± 0.48) × 10(-3) MBq (nA s)(-1) and (2.89 ± 0.37) × 10(-3) MBq (nA s)(-1), respectively.

A state observer for the Virgo inverted pendulum.

We report an application of Kalman filtering to the inverted pendulum (IP) of the Virgo gravitational wave interferometer. Using subspace method system identification techniques, we calculated a linear mechanical model of Virgo IP from experimental transfer functions. We then developed a Kalman filter, based on the obtained state space representation, that estimates from open loop time domain data, the state variables of the system. This allows the observation (and eventually control) of every resonance mode of the IP mechanical structure independently.

In-vacuum Faraday isolation remote tuning.

In-vacuum Faraday isolators (FIs) are used in gravitational wave interferometers to prevent the disturbance caused by light reflected back to the input port from the interferometer itself. The efficiency of the optical isolation is becoming more critical with the increase of laser input power. An in-vacuum FI, used in a gravitational wave experiment (Virgo), has a 20 mm clear aperture and is illuminated by an almost 20 W incoming beam, having a diameter of about 5 mm. When going in vacuum at 10(-6) mbar, a degradation of the isolation exceeding 10 dB was observed. A remotely controlled system using a motorized lambda=2 waveplate inserted between the first polarizer and the Faraday rotator has proven its capability to restore the optical isolation to a value close to the one set up in air.

[Urinary stress incontinence: rehabilitation treatment of the pelvic floor]. / Incontinenza urinaria da sforzo: trattamento rieducativo del pavimento pelvico.

The authors inspected 112 patients with diagnostic urogynecologic and urodynamic criteria. They suffered from urinary stress incontinence. Forty patients effected rehabilitative therapy of the pelvic floor with visits twice weekly with a method which included: pelvic muscle exercises, biofeedback and functional electrostimulation. The patients were divided into two groups in accordance with the kind of urinary stress incontinence: in the first group there were patients with genuine urinary stress incontinence, in the second group patients with mixed urinary stress incontinence. The results at the end of treatment reported a proportion of success of 66% in the first group and of 54% in the second group.

[Transvaginal echography in patients with postmenopausal metrorrhagia]. / L'ecografia transvaginale in pazienti con metrorragia della postmenopausa.

Forty-one postmenopausal patients with abnormal uterine bleeding were scheduled for endometrial sampling in a week from the measurement of endometrial thickness by transvaginal ultrasonography. If the cut-off limit was 5 mm, the endometrial thickness was correlated with the presence of pathologic endometrium with a sensitivity of 87.5%, a specificity of 76%, a positive predictive value of 70% and a negative predictive value of 90.5%. Endometrial hyperplasia and polyp represented the two false negative cases. Waiting for a study on a sufficiently large series, the authors think that also an endometrial thickness of a few millimeters doesn't justify the non-recourse to endometrial biopsy in the presence of repeated haemorrhagic episodes or specific risk factors.

[Clinical and instrumental evaluation after Burch's colposuspension in patients with stress urinary incontinence]. / Valutazione clinica e strumentale dopo colposospensione secondo Burch in pazienti con incontinenza urinaria da sforzo.

The authors performed a retrospective study of 29 patients undergoing Burch's anterior colposuspension to treat stress incontinence. Patients were aged between 32 and 71 years old and before surgery presented a urodynamic picture with low mictional pressure, normal filling and Max P of lower closing at 40 mm. Follow-up monitoring ranged from a minimum of 6 months to a maximum of 5 years (mean length 33 months) and was carried out using a urodynamic examination and transvaginal scan to evaluate the distance of the bladder neck from the posterior face of the pubic symphysis. Seventeen women (65.5%) were fully cured after surgery, whereas 27% improved. In "dry" patients the urodynamic examination showed increased significantly of the functional length of the urethra and the transvaginal scan showed that mean values of the distance between bladder neck and pubic symphysis were lover than those in those patients who still presented symptoms. The authors also used ultrasonography to evaluate the efficacy of the latter in the study of urinary incontinence. As reported in other studies, they affirm that intracavitary ultrasonography using a linea probe is equivalent to radiography using cystography with metallic repere, making the examination less invasive and easily repeatable; in addition, it is also important for studying the dynamics of the pelvic floor to establish effective rehabilitative treatment.