ABSTRACT
In the modern era of the Internet of Things, the potential role of flexible piezoelectric generators (PEG) reflects the rapid increase in self-powered devices and wearable technologies. In this study, a casting process to elaborate the polydimethylsiloxane (PDMS)/barium titanate (BaTiO 3) composite has been presented. The addition of 15 wt % BaTiO 3 microparticles into the PDMS polymer greatly enhances the piezoelectric coefficient (d 31 = 24 pC N-1), leading to an increased output voltage of approximately 4 V under finger tapping force. The proposed flexible microgenerator yielded an excellent piezoelectric figure of merit (FoM 31 = 13.1 × 10-12 m2 N-1), significantly enhancing successfully the energy-harvesting performance (power density of 35 nW/cm2). Furthermore, the fabricated lead-free PEG exhibited an excellent flexibility figure of merit (fFoM) due to the low young modulus values (Maximum E = 3.4 MPa). These results indicate efficient energy conversion and demonstrate a favorable balance between the flexibility and piezoelectric properties of the composite, highlighting its potential for a wide range of applications in self-powered wearable sensors able to collect different human motions in applications such as gesture tracking and finger motion detection.
ABSTRACT
The physical and mechanical properties of wood (WPC) and biochar polymer composites (BPC) obtained at different pyro-gasification temperatures and different fiber proportions were investigated. Composite pellets made from wood chips or biochar and thermoplastic polymers (polypropylene or high-density polyethylene) were obtained by twin-screw extrusion, and test specimens were prepared by injection molding. Results showed that BPCs were more dimensionally stable compared to WPCs, but their mechanical properties decreased with increasing pyro-gasification temperatures due to the poor adhesion between the polymer and biochar. Indeed, FTIR investigations revealed the decrease or absence of hydroxyl groups on biochar, which prevents the coupling agent from reacting with the biochar surface. The change in the biochar chemical structure led to an improvement in the dimensional stability and hydrophobicity of the biocomposites. Despite the increased dimensional stability of BPCs compared to WPCs, BPCs still adsorb water. This was explained by the surface roughness and by the biochar agglomerations present in the composite. In conclusion, the thermochemical conversion of black spruce wood chips into biochar makes it brittle but more hydrophobic, thereby reducing the wettability of the BPCs.
