The upgraded TOMAS device: A toroidal plasma facility for wall conditioning, plasma production, and plasma-surface interaction studies.

The Toroidal Magnetized System device has been significantly upgraded to enable development of various wall conditioning techniques, including methods based on ion and electron cyclotron (IC/EC) range of frequency plasmas, and to complement plasma-wall interaction research in tokamaks and stellarators. The toroidal magnetic field generated by 16 coils can reach its maximum of 125 mT on the toroidal axis. The EC system is operated at 2.45 GHz with up to 6 kW forward power. The IC system can couple up to 6 kW in the frequency range of 10 MHz-50 MHz. The direct current glow discharge system is based on a graphite anode with a maximum voltage of 1.5 kV and a current of 6 A. A load-lock system with a vertical manipulator allows exposure of material samples. A number of diagnostics have been installed: single- and triple-pin Langmuir probes for radial plasma profiles, a time-of-flight neutral particle analyzer capable of detecting neutrals in the energy range of 10 eV-1000 eV, and a quadrupole mass spectrometer and video systems for plasma imaging. The majority of systems and diagnostics are controlled by the Siemens SIMATIC S7 system, which also provides safety interlocks.

Overview of diagnostic performance and results for the first operation phase in Wendelstein 7-X (invited).

Wendelstein 7-X, a superconducting optimized stellarator built in Greifswald/Germany, started its first plasmas with the last closed flux surface (LCFS) defined by 5 uncooled graphite limiters in December 2015. At the end of the 10 weeks long experimental campaign (OP1.1) more than 20 independent diagnostic systems were in operation, allowing detailed studies of many interesting plasma phenomena. For example, fast neutral gas manometers supported by video cameras (including one fast-frame camera with frame rates of tens of kHz) as well as visible cameras with different interference filters, with field of views covering all ten half-modules of the stellarator, discovered a MARFE-like radiation zone on the inboard side of machine module 4. This structure is presumably triggered by an inadvertent plasma-wall interaction in module 4 resulting in a high impurity influx that terminates some discharges by radiation cooling. The main plasma parameters achieved in OP1.1 exceeded predicted values in discharges of a length reaching 6 s. Although OP1.1 is characterized by short pulses, many of the diagnostics are already designed for quasi-steady state operation of 30 min discharges heated at 10 MW of ECRH. An overview of diagnostic performance for OP1.1 is given, including some highlights from the physics campaigns.

Prevalence of Salmonella in the broiler supply chain in The Netherlands.

This article presents detailed information on Salmonella prevalence throughout the broiler supply chain in The Netherlands, based on results from a national monitoring program. Data were collected during the period 2002 through 2005 and from six sampling points in the chain, covering hatchery up to and including processing. Trends in Salmonella prevalence over years and seasons were analyzed as well as the effect of slaughterhouse capacity on these trends. In addition, correlations between the occurrence of Salmonella at the various sampling points were calculated. The results showed a decreasing trend of Salmonella prevalence from 2002 through 2005 at all sampling points. A seasonal effect on the occurrence of Salmonella was found at the broiler farm, with a higher prevalence during the third and fourth quarter of the year (July through December). The higher the capacity of the slaughterhouse, the lower Salmonella prevalence on arrival at the slaughterhouse and the higher the prevalence at the end of slaughter and the end of processing. The detailed insights obtained in this study could be used to focus future field and experimental research on the prevention and control of Salmonella in the broiler supply chain. Results presented could also be used in risk assessment studies.

Campylobacter prevalence in the broiler supply chain in the Netherlands.

After a national control program, data on Campylobacter prevalence in the broiler supply chain in the Netherlands were gathered for 3 sampling points: departure of broiler farm and arrival and departure of the slaughterhouse. Monitoring data from this control program for 2002 to 2005 were analyzed to find correlations and possible trends in the data. As expected, the greatest correlations were found between adjacent sampling points. A high correlation was expected between number of animals slaughtered and Campylobacter prevalence, because it is assumed that larger companies will have greater hygiene standards due to better implication of food safety regulations. However, statistical analysis showed that there was no clear correlation between company size and Campylobacter prevalence. Data analysis further identified an increasing trend in Campylobacter prevalence at departure of slaughterhouse from 2002 to 2005 with strong seasonality at all 3 sampling points. Measures to control Campylobacter, therefore, need to be reconsidered and possibly intensified to achieve a reduction in Campylobacter positives.

New advanced operational regime on the W7-AS stellarator.

A promising new plasma operational regime on the Wendelstein stellarator W7-AS has been discovered. It is extant above a threshold density and characterized by flat density profiles, high energy and low impurity confinement times, and edge-localized radiation. Impurity accumulation is avoided. Quasistationary discharges with line-averaged densities n(e) to 4 x 10(20) m(-3), radiation levels to 90%, and partial plasma detachment at the divertor target plates can be simultaneously realized. Energy confinement is up to twice that of a standard scaling. At B(t) = 0.9 T, an average beta value of 3.1% is achieved. The high n(e) values allow demonstration of electron Bernstein wave heating using linear mode conversion.