The Technology Horizon for Photocatalytic Water Treatment: Sunrise or Sunset?

Advanced oxidation processes via semiconductor photocatalysis for water treatment have been the subject of extensive research over the past three decades, producing many scientific reports focused on elucidating mechanisms and enhancing kinetics for the treatment of contaminants in water. Many of these reports imply that the ultimate goal of the research is to apply photocatalysis in municipal water treatment operations. However, this ignores immense technology transfer problems, perpetuating a widening gap between academic advocation and industrial application. In this Feature, we undertake a critical examination of the trajectory of photocatalytic water treatment research, assessing the viability of proposed applications and identifying those with the most promising future. Several strategies are proposed for scientists and engineers who aim to support research efforts to bring industrially relevant photocatalytic water treatment processes to fruition. Although the reassessed potential may not live up to initial academic hype, an unfavorable assessment in some areas does not preclude the transfer of photocatalysis for water treatment to other niche applications as the technology retains substantive and unique benefits.

Influence of carbon and metal oxide nanomaterials on aqueous concentrations of the munition constituents cyclotrimethylenetrinitramine (RDX) and tungsten.

There is an increasing likelihood of interactions between nanomaterials and munitions constituents in the environment resulting from the use of nanomaterials as additives to energetic formulations and potential contact in waste streams from production facilities and runoff from training ranges. The purpose of the present research was to determine the ability of nano-aluminum oxide (Al(2)O(3)) and multiwalled carbon nanotubes (MWCNTs) to adsorb the munitions constituents cyclotrimethylenetrinitramine (RDX) and tungsten (W) from aqueous solution as a first step in determining the long-term exposure, transport, and bioavailability implications of such interactions. The results indicate significant adsorption of RDX by MWCNTs and of W by nano-Al(2)O(3) (but not between W and MWCNT or RDX and nano-Al(2)O(3)). Kinetic sorption and desorption investigations indicated that the most sorption occurs nearly instantaneously (<5 min), with a relatively slower, secondary binding leading to statistically significant but relatively smaller increases in adsorption over 30 d. The RDX sorption that occurred during the initial interaction was irreversible, with long-term, reversible sorption likely the result of a secondary interaction; as interaction time increased, however, the portion of W irreversibly sorbed onto nano-Al(2)O(3) also increased. The present study shows that strong interactions between some munitions constituents and nanomaterials following environmental release are likely. Time-dependent binding has implications for the bioavailability, migration, transport, and fate of munitions constituents in the environment.

Photocatalytic pre-treatment with food-grade TiO(2) increases the bioavailability and bioremediation potential of weathered oil from the Deepwater Horizon oil spill in the Gulf of Mexico.

Using the 2010 Deepwater Horizon oil spill in the Gulf of Mexico as an impetus, we explored the potential for TiO(2)-mediated photocatalytic reactive oxygen species (ROS) generation to increase the bioavailability (solubility) and biodegradability of weathered oil after a spill. Food grade TiO(2), which is FDA approved for use as food additive in the United States, was tested as a photocatalyst for this novel application. Photocatalytic pre-treatment (0.05 wt.% TiO(2), UV irradiation 18 W m(-2), 350-400 nm) for 24 h in a bench top photoreactor increased the soluble organic carbon content of weathered oil by 60%, and enhanced its subsequent biodegradation (measured as O(2) consumption in a respirometer) by 37%. Photocatalytic pre-treatment was also tested outdoors under sunlight illumination, but no significant increase in solubility or biodegradation was observed after 11 d of exposure. Although sunlight irradiation of food-grade TiO(2) generated ROS (assessed by the degradation of 4-chlorophenol as a probe compound), the efficacy of weathered oil pre-treatment was apparently hindered by sinking of the photocatalysts under quiescent conditions and illumination occlusion by the oil. Overall, results indicate that photocatalytic pre-treatment to stimulate bioremediation of weathered oil deserves further consideration, but controlling the buoyancy and surface hydrophobicity of the photocatalysts will be important for future efforts to enable ROS generation in proximity to the target compounds.