ABSTRACT
We demonstrate 20-Gb/s 4-level pulse amplitude modulation (PAM-4) signal generation using a silicon Mach-Zehnder modulator (MZM) in the O-band. The modulator is driven by two independent binary streams, and the PAM-4 signal is thus generated directly on the chip, avoiding the use of power-hungry digital-to-analog converters (DACs). With optimized amplitude levels of the binary signals applied to the two arms of the MZM, a pre-forward error correction (FEC) bit-error rate (BER) as low as 7.6 × 10-7 is obtained. In comparison with a commercially available LiNbO3 modulator, the penalty is only 2 dB at the KP4 FEC threshold of 2.2 × 10-4.
ABSTRACT
We provide numerical verification of a feed-forward, heterodyne-based phase noise reduction scheme using single-sideband modulation that obviates the need for optical filtering at the output. The main benefit of a feed-forward heterodyne linewidth reduction scheme is the simultaneous reduction of the linewidth of all modes of a mode-locked laser (MLL) to that of a narrow-linewidth single-wavelength laser. At the heart of our simulator is an MLL model of reduced complexity. Importantly, the main issue being treated is the jitter of MLLs and we show how to create numerical waveforms that mimic the random-walk nature of timing jitter of pulses from MLLs. Thus, the model does not need to solve stochastic differential equations that describe the MLL dynamics, and the model calculates self-consistently the line-broadening of the modes of the MLL and shows good agreement with both the optical linewidth and jitter. The linewidth broadening of the MLL modes are calculated after the phase noise reduction scheme and we confirm that the phase noise contribution from the timing jitter still remains. Finally, we use the MLL model and phase noise reduction simulator within an optical communications system simulator and show that the phase noise reduction technique could enable MLLs as optical carriers for higher-order modulation formats, such as 16-state and 64-state quadrature amplitude modulation.
ABSTRACT
We demonstrate 4 × 10 Gbit/s error-free bidirectional transmission over 2 km of conventional OM1 graded-index multimode fiber using OOK modulation and direct detection. We also perform field transmission to show reach and capacity boosts on legacy multimode infrastructure. Such transmission is enabled by selective mode group division multiplexing, based on multi-plane light conversion over 4 mode groups of the multimode fiber.
ABSTRACT
Photonic crystal cavity-based switching is studied both theoretically and experimentally in order to identify the best configuration to maximize "wavelength conversion" efficiency. In particular, it is shown that an enhanced contrast can be reached when the probe is blueshifted with respect to the resonance. The use of an InP/SOI hybrid photonic crystal nanocavity is reported for the first time for all-optical error-free "wavelength conversion" at 20 Gbit/s with a nonreturn to zero on-off keying signal.
ABSTRACT
As channels rates in optical networks are expected to exceed 100 Gb/s in the near future, new optical techniques for clock recovery will have to be developed for optical regeneration. This paper describes an optical clock recovery method based on a mode-locked laser diode. Experimental results show that a 42 GHz high quality optical clock can be retrieved from a 170 Gb/s OTDM data signal. Chirp transfer between the incident signal and the recovered clock signal is investigated using the SHG-FROG method. Results demonstrate that this clock recovery technique is invariant to input dispersion varying between +/-75 ps/nm, making it ideal for use in 3R regenerators.
