Cementitious composite materials for thermal energy storage applications: a preliminary characterization and theoretical analysis.

The lack of robust and low-cost sorbent materials still represents a formidable technological barrier for long-term storage of (renewable) thermal energy and more generally for Adsorptive Heat Transformations-AHT. In this work, we introduce a novel approach for synthesizing cement-based composite sorbent materials. In fact, considering the number of available hygrosopic salts that can be accommodated into a cementitious matrix-whose morphological properties can be also fine-tuned-the new proposed in situ synthesis paves the way to the generation of an entire new class of possible sorbents for AHT. Here, solely focusing on magnesium sulfate in a class G cement matrix, we show preliminary morphological, mechanical and calorimetric characterization of sub-optimal material samples. Our analysis enables us to theoretically estimate one of the most important figures of merit for the considered applications, namely the energy density which was found to range within 0.088-0.2 GJ/m3 (for the best tested sample) under reasonable operating conditions for space heating applications and temperate climate. The above estimates are found to be lower than other composite materials in the literature. Nonetheless, although no special material optimization has been implemented, our samples already compare favourably with most of the known materials in terms of specific cost of stored energy. Finally, an interesting aspect is found in the ageing tests under water sorption-desorption cycling, where a negligible variation in the adsorption capability is demonstrated after over one-hundred cycles.

Microwave based regenerating permeable reactive barriers (MW-PRBs): Proof of concept and application for Cs removal.

The present study evaluates the concept of permeable reactive barrier (PRB) coupled with microwaves (MWs) as in situ-regenerating technology with focus on Cs-contaminated water. Experimental and modelling results data from batch and column tests were carried out, evaluating several chemical-physical and environmental parameters. Main results showed a very rapid increase in GAC temperature during MW irradiation up to ∼680 °C. This highlights the GAC strong ability to transform MW power into heat due to GAC excellent dielectric properties (ε' = 13.8). Physical characterization revealed that GAC pore volume and specific surface area change with the number of regeneration cycles. GAC regeneration efficiency variation reflects this behaviour with a maximum value of ∼112% (5th cycle). The final GAC weight loss of ∼7% further demonstrates GAC life span preservation during MW irradiation. Results from column tests confirms that GAC can be regenerated by MW also in dynamic condition, due to sublimation/vaporization and vapour stripping Cs removal mechanisms and that the regeneration effectiveness is time-dependent. The breakthrough curve shape confirms significant benefits from MW irradiation. Overall, obtained finding demonstrated the feasibility of the proposed concept, also providing essential data to guide its scaling-up application.

Field technical applicability and cost analysis for microwave based regenerating permeable reactive barriers (MW-PRBs) operating in Cs-contaminated groundwater treatment.

The present study tests the potentiality of a novel microwave based regenerating permeable reactive barrier (MW-PRB) system as combined treatment for Cs-contaminated groundwater. Granular activated carbon (GAC) was selected as adsorptive materials in batch and column MW-regeneration experiments. Experimental and modeling data were elaborated for technical and economic considerations in order to assess the MW-PRB feasibility jointly with essential information regarding its real field applicability. Batch experiments investigated the effects of 10 adsorption-MW regeneration cycles under different MW irradiation conditions (applied electric field = 200-460 V m-1; irradiation times = 1-15 min) by assessing GAC variation properties in term of regeneration yield (δ), specific area and weight loss (WL) variation. Column tests were carried using a dedicated setup essentially including a column filled with GAC implanted in a MW oven cavity (MW electric field of 385 V m-1, irradiation times 5-15 min). Lab-scale results shown the ability of MW in Cs removal from GAC as demonstrated by regeneration yield (δ = 79-110%) and WL (6.78% for 10 cycles) values. This was confirmed in dynamic conditions by data from MW-column tests highlighting the highest Cs removal of ~80% when the maximum regeneration time was applied. Residual Cs concentration in breakthrough curves fitted well with the proposed Yoon and Nelson model (R2 = ~0.97). Results from techno-economic analysis revealed the MW-PRB viability and its advantages also in comparison with conventional PRB systems, demonstrating the concept of combined MW-PRB treatment. Saved cost obtained demonstrated in fact the potential cost effectiveness of MW-PRB system and, consequently, the implementation of novel approach is encouraged. Calculated PRB longevity vs groundwater velocity curves are useful in order to predict long-term PRB performance and the response of the remediation activities, as well as for guiding the design and the scaling-up of MW-PRB treatment.

Adsorption Heat Storage: State-of-the-Art and Future Perspectives.

Thermal energy storage (TES) is a key technology to enhance the efficiency of energy systems as well as to increase the share of renewable energies. In this context, the present paper reports a literature review of the recent advancement in the field of adsorption TES systems. After an initial introduction concerning different heat storage technologies, the working principle of the adsorption TES is explained and compared to other technologies. Subsequently, promising features and critical issues at a material, component and system level are deeply analyzed and the ongoing activities to make this technology ready for marketing are introduced.