[Management of joint empyema]. / Management von Gelenkempyemen.

Joint empyema, also known as septic arthritis, is a severe disease associated with considerable morbidity and mortality. Failing to initiate immediate treatment can result in irreversible joint destruction within a short time. The knee joint is most frequently involved, followed by the shoulder and hip joints. Small joints are rarely affected. Typical risk factors include immunosuppression, renal insufficiency, diabetes mellitus and previous joint interventions. An early targeted diagnostic work-up and initiation of therapeutic steps is crucial to avoid irreversible joint destruction. Joint aspiration for diagnostic purposes is essential and should be performed immediately when a septic arthritis is suspected. An important differential diagnosis is metabolic arthritis (gout and chondrocalcinosis), which typically presents in a similar way. A differentiation from septic arthritis is important as metabolic arthritis requires a completely different treatment. After confirming the diagnosis, treatment consisting of a surgical procedure combined with antibiotics is initiated. In most cases an arthroscopic intervention is sufficient. In severe cases the arthroscopy needs to be repeated. An arthrotomy must be carried out only rarely. A pre-emptive antibiotic treatment is initially administered and is later adjusted according to the resistogram. This article gives an overview on the pathophysiology, diagnostics and general management of joint empyema.

Point detection through multi-instance deep heatmap regression for sutures in endoscopy.

PURPOSE: Mitral valve repair is a complex minimally invasive surgery of the heart valve. In this context, suture detection from endoscopic images is a highly relevant task that provides quantitative information to analyse suturing patterns, assess prosthetic configurations and produce augmented reality visualisations. Facial or anatomical landmark detection tasks typically contain a fixed number of landmarks, and use regression or fixed heatmap-based approaches to localize the landmarks. However in endoscopy, there are a varying number of sutures in every image, and the sutures may occur at any location in the annulus, as they are not semantically unique. METHOD: In this work, we formulate the suture detection task as a multi-instance deep heatmap regression problem, to identify entry and exit points of sutures. We extend our previous work, and introduce the novel use of a 2D Gaussian layer followed by a differentiable 2D spatial Soft-Argmax layer to function as a local non-maximum suppression. RESULTS: We present extensive experiments with multiple heatmap distribution functions and two variants of the proposed model. In the intra-operative domain, Variant 1 showed a mean [Formula: see text] of [Formula: see text] over the baseline. Similarly, in the simulator domain, Variant 1 showed a mean [Formula: see text] of [Formula: see text] over the baseline. CONCLUSION: The proposed model shows an improvement over the baseline in the intra-operative and the simulator domains. The data is made publicly available within the scope of the MICCAI AdaptOR2021 Challenge https://adaptor2021.github.io/ , and the code at https://github.com/Cardio-AI/suture-detection-pytorch/ .

Stress fractures of the femoral neck in runners: a review.

A systematic review, following strict inclusion criteria, identified 32/48 low and 16/48 high-performance runners with stress fractures of the femoral neck. Surgical treatment was performed in 33/48 cases and was significantly higher (p = 0.009) in high-performance runners. Among the 28/48 runners who resumed running, there were significantly more lower-performance runners (23/32) than higher-performing runners (5/16) (p = 0.012) and significantly more non-displaced (22/30) than displaced fractures (6/18) (p = 0.014). Complicated cases showed significantly less favourable follow-up results (p = 0.036). A significantly shorter (p = 0.032) diagnostic time for evaluation occurred with a previous history of a stress fracture or a relevant comorbidity. Stress fractures of the femoral neck represent an incisive incident for runners, and early consideration in the differential diagnosis of hip pain is required to avoid potential long-term sequelae and suboptimal function.

Transporous hernia mesh fixation with fibrin sealant in an in vitro model of spray application.

BACKGROUND: The spray application of fibrin sealant (FS) is widely used for atraumatic mesh fixation in open and laparoscopic hernia surgery. Studies focusing on the optimization of sealant distribution are rare. This study elucidates the impact of spray distance and pressure, the thrombin concentration of the FS, as well as the mesh design on the spray process and the resulting sealant distribution. Furthermore, the effect of interrupting the spray process on sealant distribution was investigated. MATERIAL AND METHODS: Three different meshes were sprayed in a vertical test arrangement with 0.4 mL FS. Fibrin sealants containing 4 and 500 IU/mL thrombin (Tisseel and Artiss; Vienna, Austria) provided by Baxter Biosciences were used. The application distances varied from 5 to 8 cm. The relative fibrin sealant distribution on the individual mesh surfaces was evaluated and compared, as well as loss of FS and patterns of clot formation. RESULTS: Spray distances between 5 and 8 cm led to a homogenous sealant distribution. Lower thrombin concentrations led to significant losses of FS due to slower polymerization. Differences of the fibrin sealant distribution and mesh pore sizes were found. No differences between continuous and discontinuous application were observed. CONCLUSION: The spray application of FS provides a uniform sealant film in a defined range of distances. However, design and pore size of different meshes substantially impact sealant distribution. These findings should be considered when selecting prosthesis for hernia repair. In general, the amount of sealant should not exceed 0.08 mL per cm(2) to avoid obstruction of mesh pores.

A comparative biomechanical evaluation of hernia mesh fixation by fibrin sealant.

BACKGROUND: The atraumatic fixation of meshes by fibrin sealant (FS) has been established for both open and laparoscopic techniques of hernia repair. This study was performed to evaluate the use of FS in hernia mesh fixation with different polymerization speed (thrombin concentrations), using commercial hernia meshes, and in two techniques, transabdominal preperitoneal mesh placement (TAPP) and intraperitoneal mesh placement (IPOM). MATERIALS AND METHODS: A median laparotomy was performed in a pig model and hernia meshes were placed in IPOM and TAPP techniques. After mesh fixation with FS using thrombin concentrations of 4 and 500 IU/mL, maximum shear force before failure was measured at 5, 60, and 120 min. RESULTS: At both thrombin concentrations and in all meshes in which the technique was used, the TAPP method tended to show higher maximum force levels at failure than did the IPOM method. In both TAPP and IPOM techniques and in all meshes, the 4 IU/mL thrombin concentration FS was superior to the 500 IU/mL thrombin concentration sealant. CONCLUSIONS: Although both thrombin concentrations are suitable for mesh fixation, lower concentrations allow slower polymerization and better sealant diffusion leading to higher maximum force levels at failure. The TAPP method was biomechanically superior to the IPOM method. There were no major differences between mesh products.

The feasibility of FS mesh fixation by a transgastric approach--an important benefit in future NOTES procedures?

BACKGROUND: Preserving the integrity of the abdominal wall is a major benefit in NOTES procedures. It may result in a decrease of postoperative (postOP) pain, infection, and port site hernia. This experimental study on intra-peritoneal onlay mesh (IPOM) repair was designed to apply meshes by a transgastric access (TGA) and to use a combination of transfascial sutures and fibrin sealant as fixation. MATERIALS AND METHODS: Four abdominal wall defects were created by TGA under laparoscopic control in five nonsurvival and three survival pigs (4, 11, and 22 d observation period). Titanized polypropylene meshes were fixed transfascially by four polypropylene sutures using a "suture passer" device. Meshes were additionally fixed with 0.2 mL of fibrin sealant (FS) by an endoscopic application. TGA was closed with endoclips in the nonsurvival model and with laparoscopic suturing in survival pigs. RESULTS: The three survival pigs were euthanized on the d 4, 11, and 22 postOP. The macroscopic evaluation revealed excellent integration of the meshes without signs of shrinkage, dislocation, or inflammation. Histology confirmed macroscopic findings. CONCLUSIONS: Our findings confirm that IPOM repair of ventral hernia in an experimental NOTES hybrid procedure is feasible. This study also demonstrates the technical feasibility and the potential advantages of FS mesh fixation to further reduce trauma to the abdominal wall following the key principles of the NOTES approach.