Proton Reduction Using a Hydrogenase-Modified Nanoporous Black Silicon Photoelectrode.

Metalloenzymes featuring earth-abundant metal-based cores exhibit rates for catalytic processes such as hydrogen evolution comparable to those of noble metals. Realizing these superb catalytic properties in artificial systems is challenging owing to the difficulty of effectively interfacing metalloenzymes with an electrode surface in a manner that supports efficient charge-transfer. Here, we demonstrate that a nanoporous "black" silicon (b-Si) photocathode provides a unique interface for binding an adsorbed [FeFe]-hydrogenase enzyme ([FeFe]-H2ase). The resulting [FeFe]-H2ase/b-Si photoelectrode displays a 280 mV more positive onset potential for hydrogen generation than bare b-Si without hydrogenase, similar to that observed for a b-Si/Pt photoelectrode at the same light intensity. Additionally, we show that this H2ase/b-Si electrode exhibits a turnover frequency of ≥1300 s(-1) and a turnover number above 10(7) and sustains current densities of at least 1 mA/cm(2) based on the actual surface area of the electrode (not the smaller projected geometric area), orders of magnitude greater than that observed for previous enzyme-catalyzed electrodes. While the long-term stability of hydrogenase on the b-Si surface remains too low for practical applications, this work extends the proof-of-concept that biologically derived metalloenzymes can be interfaced with inorganic substrates to support technologically relevant current densities.

Angle-resolved XPS analysis and characterization of monolayer and multilayer silane films for DNA coupling to silica.

We measure silane density and Sulfo-EMCS cross-linker coupling efficiency on aminosilane films by high-resolution X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) measurements. We then characterize DNA immobilization and hybridization on these films by (32)P-radiometry. We find that the silane film structure controls the efficiency of the subsequent steps toward DNA hybridization. A self-limited silane monolayer produced from 3-aminopropyldimethylethoxysilane (APDMES) provides a silane surface density of ~3 nm(-2). Thin (1 h deposition) and thick (19 h deposition) multilayer films are generated from 3-aminopropyltriethoxysilane (APTES), resulting in surfaces with increased roughness compared to the APDMES monolayer. Increased silane surface density is estimated for the 19 h APTES film, due to a ∼32% increase in surface area compared to the APDMES monolayer. High cross-linker coupling efficiencies are measured for all three silane films. DNA immobilization densities are similar for the APDMES monolayer and 1 h APTES. However, the DNA immobilization density is double for the 19 h APTES, suggesting that increased surface area allows for a higher probe attachment. The APDMES monolayer has the lowest DNA target density and hybridization efficiency. This is attributed to the steric hindrance as the random packing limit is approached for DNA double helices (dsDNA, diameter ≥ 2 nm) on a plane. The heterogeneity and roughness of the APTES films reduce this steric hindrance and allow for tighter packing of DNA double helices, resulting in higher hybridization densities and efficiencies. The low steric hindrance of the thin, one to two layer APTES film provides the highest hybridization efficiency of nearly 88%, with 0.21 dsDNA/nm(2). The XPS data also reveal water on the cross-linker-treated surface that is implicated in device aging.

An 18.2%-efficient black-silicon solar cell achieved through control of carrier recombination in nanostructures.

Silicon nanowire and nanopore arrays promise to reduce manufacturing costs and increase the power conversion efficiency of photovoltaic devices. So far, however, photovoltaic cells based on nanostructured silicon exhibit lower power conversion efficiencies than conventional cells due to the enhanced photocarrier recombination associated with the nanostructures. Here, we identify and separately measure surface recombination and Auger recombination in wafer-based nanostructured silicon solar cells. By identifying the regimes of junction doping concentration in which each mechanism dominates, we were able to design and fabricate an independently confirmed 18.2%-efficient nanostructured 'black-silicon' cell that does not need the antireflection coating layer(s) normally required to reach a comparable performance level. Our results suggest design rules for efficient high-surface-area solar cells with nano- and microstructured semiconductor absorbers.

Diffractive light trapping in crystal-silicon films: experiment and electromagnetic modeling.

Diffractive light trapping in 1.5 µm thick crystal silicon films is studied experimentally through hemispherical reflection measurements and theoretically through rigorous coupled-wave analysis modeling. The gratings were fabricated by nanoimprinting of dielectric precursor films. The model data, which match the experimental results well without the use of any fitting parameters, are used to extract the light trapping efficiency. Diffractive light trapping is studied as a function of incidence angle, and an enhancement of light absorption is found for incidence angles up to 50° for both TE and TM polarizations.

High-resolution X-ray photoelectron spectroscopy of mixed silane monolayers for DNA attachment.

The amine density of 3-aminopropyldimethylethoxysilane (APDMES) films on silica is controlled to determine its effect on DNA probe density and subsequent DNA hybridization. The amine density is tailored by controlling the surface reaction time of (1) APDMES, or (2) n-propyldimethylchlorosilane (PDMCS, which is not amine terminated) and then reacting it with APDMES to form a mixed monolayer. High-resolution X-ray photoelectron spectroscopy (XPS) is used to quantify silane surface coverage of both pure and mixed monolayers on silica; the XPS data demonstrate control of amine density in both pure APDMES and PDMCS/APDMES mixed monolayers. A linear correlation between the atomic concentration of N atoms from the amine and Si atoms from the APDMES in pure APDMES films allows us to calculate the PDMCS/APDMES ratio in the mixed monolayers. Fluorescence from attached DNA probes and from hybridized DNA decreases as the percentage of APDMES in the mixed monolayer is decreased by dilution with PDMCS.

Understanding the clean interface between covalent Si and ionic Al2O3.

The atomic and electronic structures of the (001)-Si/(001)-gamma-Al(2)O(3) heterointerface are investigated by first principles total energy calculations combined with a newly developed "modified basin-hopping" method. It is found that all interface Si atoms are fourfold coordinated due to the formation of Si-O and unexpected covalent Si-Al bonds in the new abrupt interface model. And the interface has perfect electronic properties in that the unpassivated interface has a large LDA band gap and no gap levels. These results show that it is possible to have clean semiconductor-oxide interfaces.

Bistability-mediated carrier recombination at light-induced boron-oxygen complexes in silicon.

A first-principles study of the BO2 complex in B-doped Czochralski Si reveals a defect-bistability-mediated carrier recombination mechanism, which contrasts with the standard fixed-level Shockley-Read-Hall model of recombination. An O2 dimer distant from B causes only weak carrier recombination, which nevertheless drives O2 diffusion under light to form the BO2 complex. Although BO2 and O2 produce nearly identical defect levels in the band gap, the recombination at BO2 is substantially faster than at O2 because the charge state of the latter inhibits the hole capture step of recombination.