When it is too much: Identifying butamben excess on the surface of pharmaceutical preformulation samples by Raman mapping.

Butamben is a topical local anesthetic which formulation in lipid-based drug delivery systems (DDS) is challenging due to its affinity for hydrophilic excipients. This means that a medium polarity excipient is preferred for the development of a stable nanostructured lipid carrier (NLC) formulation. In turn, in NLC, the type and number of excipients will determine the active pharmaceutical ingredient (API) solubility and the maximum drug upload. To solve this dilemma and get the best formulation, a throughout screening study to evaluate API solubilization in different excipients was carried out. Subsequently, excipients with different solubilization capacities were selected for microscopic evaluation by Raman mapping, and in turn analysis of the distributional homogeneity index (DHI) and standard deviation of the histograms allowed solving the posed question. Design of experiments (DoE) was employed to understand better the interactions between the excipients; linear and higher-order models were obtained with R2 above of 0.8824. Even though DHI is a good parameter to be used as response, an API concentration higher than 30% (w/w) provided a homogeneous surface in case of good miscibility and, in this case, this parameter needs to be employed with an inspection and/or evaluation of other parameters. A curve of concentration vs. mean scores of images proved to be an alternative to identify the saturation/limit of linear range.

Analytical quality-by-design (AQbD) approach for comprehensive analysis of bioactive compounds from Citrus peel wastes by UPLC.

The growing interest in ingredients from natural sources has expanded the need for quality assessments of plant extracts. Analytical quality-by-design (AQbD) has been increasingly applied in regulated environments such as pharmaceutical industries and, more recently, for the bioactive compounds found in botanical materials. This work aimed to obtain qualitative (overall resolution and maximum peak capacity) and quantitative performances for target analytes using AQbD principles. The analytical target profile was elaborated; critical method parameters (independent variables) that affect the critical method attributes (dependent variables) were selected from a risk assessment for a reversed-phase liquid chromatography with diode array detection (RPLC-DAD) method. YMC-Triart C18 (3.0 × 100 mm, 1.9 µm) and a gradient elution using 0.2% acetic acid and methanol:acetonitrile 1:3 (v/v) were chosen as the stationary and mobile phases, respectively. The optimal and robust conditions (temperature at 33.3 °C, flow rate of 0.68 mL.min-1, and a gradient slope of 4.18%.min-1) were established by the method operable design region (MODR). The validation was performed by accuracy profiles using 90% expectation tolerance intervals for the selected compounds found in Citrus spp. using C. japonica as blank matrix. The lower limits of quantification for hesperidin, bergapten, herniarin, and citropten were 5.32, 0.40, 0.49, and 0.52 mg.L-1, respectively (acceptance limit was set at ± 20%). Nobiletin did not show an adequate quantitative performance.

Neither too little nor too much: Finding the ideal proportion of excipients using confocal Raman and chemometrics.

The applications of Raman imaging in pharmaceutical field are ever-increasing due its ability to obtain spatial and spectral information simultaneously, once it allows determine the chemical distribution of compounds. In this sense, it is used to study homogeneity, of paramount importance during the development of pharmaceutical formulations due to its relation to stability, safety and efficacy. Commonly, just surface is analyzed, but confocal Raman spectroscopy can also characterize the inner part of samples, allowing to determine phase separation in the early stages. In this sense, confocal 3D Raman microscopy was crucial to obtain the optimal proportion of Apifil®, Capryol® 90 and Transcutol® to promote controlled release of the local anesthetic butamben (BTB). 3D chemical maps were obtained by classical least squares (CLS) using pure compound spectra as S matrix, showing that chemical distribution throughout the material was different. Knowing that the composition of samples affects the homogeneity parameter, standard deviation and distributional homogeneity index (DHI) were used in mixture experimental design (DoE). From this analysis, it was revealed that a correct amount of Capryol® 90 enhances both miscibility and solubility. Furthermore, suitable miscibility was observed in two ratio proportions of excipients with a desirability of 0.783 and 0.742. These results unequivocally demonstrated that confocal Raman microscopy combined to DoE can bring pharmaceutical development to a higher level.

A pre-formulation study of tetracaine loaded in optimized nanostructured lipid carriers.

Tetracaine (TTC) is a local anesthetic broadly used for topical and spinal blockade, despite its systemic toxicity. Encapsulation in nanostructured lipid carriers (NLC) may prolong TTC delivery at the site of injection, reducing such toxicity. This work reports the development of NLC loading 4% TTC. Structural properties and encapsulation efficiency (%EE > 63%) guided the selection of three pre-formulations of different lipid composition, through a 23 factorial design of experiments (DOE). DLS and TEM analyses revealed average sizes (193-220 nm), polydispersity (< 0.2), zeta potential |- 21.8 to - 30.1 mV| and spherical shape of the nanoparticles, while FTIR-ATR, NTA, DSC, XRD and SANS provided details on their structure and physicochemical stability over time. Interestingly, one optimized pre-formulation (CP-TRANS/TTC) showed phase-separation after 4 months, as predicted by Raman imaging that detected lack of miscibility between its solid (cetyl palmitate) and liquid (Transcutol) lipids. SANS analyses identified lamellar arrangements inside such nanoparticles, the thickness of the lamellae been decreased by TTC. As a result of this combined approach (DOE and biophysical techniques) two optimized pre-formulations were rationally selected, both with great potential as drug delivery systems, extending the release of the anesthetic (> 48 h) and reducing TTC cytotoxicity against Balb/c 3T3 cells.

Lipid nanoparticles loaded with butamben and designed to improve anesthesia at inflamed tissues.

The most frequently used local anesthetics (LA) for local infiltration have an ionizable amine in the range of pH 7.6-8.9. Effective anesthesia of inflamed tissues is a great challenge, especially because the induced local acidosis decreases the fraction of the neutral (more potent) LA species in situ. To solve this limitation, the butyl-substituted benzocaine analogue butamben (BTB) - that has no ionizable amine group close to the physiological pH - could be useful if it was not for its low solubility. To overcome the solubility problem, an optimized formulation for BTB using nanostructured lipid carriers (NLC) was developed by a factorial design and characterized using DLS, XRD, DSC and cryo-EM. The release kinetics and cytotoxicity of the new formulation were measured in vitro, while the in vivo tests assessed its effectiveness on healthy and inflamed tissues, in rats. The optimized NLCBTB formulation showed desirable physicochemical properties (size = 235.6 ± 3.9 nm, polydispersity = 0.182 ± 0.006 and zeta potential = -23.6 ± 0.5 mV), high (99.5%) encapsulation efficiency and stability during 360 days of storage at room temperature. NLCBTB prolonged the release of butamben and decreased its in vitro cytotoxicity without inducing any in vivo toxic alteration. In the inflammatory hyperalgesia model, the NLCBTB formulation showed potential for the management of inflammatory pain, displaying greater analgesic effectiveness (40%) and a prolonged effect.

Functional Hybrid Nanoemulsions for Sumatriptan Intranasal Delivery.

In recent years, advanced nanohybrid materials processed as pharmaceuticals have proved to be very advantageous. Triptans, such as the commercially available intranasal sumatriptan (SMT), are drugs employed in the treatment of painful migraine symptoms. However, SMT effectiveness by the intranasal route is limited by its high hydrophilicity and poor mucoadhesion. Therefore, we designed hybrid nanoemulsions (NE) composed of copaiba oil as the organic component plus biopolymers (xanthan, pectin, alginate) solubilized in the continuous aqueous phase, aiming at the intranasal release of SMT (2% w/v). Firstly, drug-biopolymer complexes were optimized in order to decrease the hydrophilicity of SMT. The resultant complexes were further encapsulated in copaiba oil-based nanoparticles, forming NE formulations. Characterization by FTIR-ATR, DSC, and TEM techniques exposed details of the molecular arrangement of the hybrid systems. Long-term stability of the hybrid NE at 25°C was confirmed over a year, regarding size (~ 120 nm), polydispersity (~ 0.2), zeta potential (~ -25 mV), and nanoparticle concentration (~ 2.1014 particles/mL). SMT encapsulation efficiency in the formulations ranged between 41-69%, extending the in vitro release time of SMT from 5 h (free drug) to more than 24 h. The alginate-based NE was selected as the most desirable system and its in vivo nanotoxicity was evaluated in a zebrafish model. Hybrid NE treatment did not affect spontaneous movement or induce morphological changes in zebrafish larvae, and there was no evidence of mortality or cardiotoxicity after 48 h of treatment. With these results, we propose alginate-based nanoemulsions as a potential treatment for migraine pain.

Articaine in functional NLC show improved anesthesia and anti-inflammatory activity in zebrafish.

Anesthetic failure is common in dental inflammation processes, even when modern agents, such as articaine, are used. Nanostructured lipid carriers (NLC) are systems with the potential to improve anesthetic efficacy, in which active excipients can provide desirable properties, such as anti-inflammatory. Coupling factorial design (FD) for in vitro formulation development with in vivo zebrafish tests, six different NLC formulations, composed of synthetic (cetyl palmitate/triglycerides) or natural (avocado butter/olive oil/copaiba oil) lipids were evaluated for loading articaine. The formulations selected by FD were physicochemically characterized, tested for shelf stability and in vitro release kinetics and had their in vivo effect (anti-inflammatory and anesthetic effect) screened in zebrafish. The optimized NLC formulation composed of avocado butter, copaiba oil, Tween 80 and 2% articaine showed adequate physicochemical properties (size = 217.7 ± 0.8 nm, PDI = 0.174 ± 0.004, zeta potential = - 40.2 ± 1.1 mV, %EE = 70.6 ± 1.8) and exhibited anti-inflammatory activity. The anesthetic effect on touch reaction and heart rate of zebrafish was improved to 100 and 60%, respectively, in comparison to free articaine. The combined FD/zebrafish approach was very effective to reveal the best articaine-in-NLC formulation, aiming the control of pain at inflamed tissues.

Hybrid nanofilms as topical anesthetics for pain-free procedures in dentistry.

Topical anesthetics are widely applied in order to relieve the discomfort and anxiety caused by needle insertion and other painful superficial interventions at the oral cavity. So far, there are no commercially available effective topical anesthetic formulations for that purpose, and the most of developments are related to hydrophilic and low mucoadhesive forms. Therefore, we have prepared different hybrid nanofilms composed of biopolymer matrices (chitosan, pectin, and chitosan-pectin) blended with nanostructured lipid carriers (NLC) loading the eutectic mixture of 5% lidocaine-prilocaine (LDC-PLC), in order to fulfill this gap in the market. These dual systems were processed as hybrid nanofilms by the solvent/casting method, and its mucoadhesive, structural and mechanical properties were detailed. The most appropriate hybrid nanofilm combined the advantages of both pectin (PCT) and NLC components. The resultant material presented sustained LDC-PLC release profile for more than 8 h; permeation across porcine buccal mucosa almost twice higher than control and non-cytotoxicity against 3T3 and HACAT cell lines. Then, the in vivo efficacy of PCT/NLC formulation was compared to biopolymer film and commercial drug, exhibiting the longest-lasting anesthetic effect (> 7 h), assessed by tail flick test in mice. These pectin-based hybrid nanofilms open perspectives for clinical trials and applications beyond Dentistry.

Injectable in situ forming nanogel: A hybrid Alginate-NLC formulation extends bupivacaine anesthetic effect.

Finding an ideal anesthetic agent for postoperative pain control, with long action and low side effects, is still a challenge. Local anesthetics have potential for such application if their time of action is improved. This work introduces a new hybrid formulation formed by the association of a nanostructured lipid carrier with a biopolymeric system to encapsulate bupivacaine (BVC). The hybrid formulation was physicochemical and structurally characterized by DLS, TEM, DSC, XRD and FTIR-ATR, and it remained stable for 12 months at room temperature. In vivo analgesia and imaging tests showed that the hybrid system was able to modulate the release, and to increase the concentration of BVC at the site of action, by forming a nanogel in situ. Such nanogel improved over 5 times (>24 h) the anesthesia duration, when compared to free BVC at clinical (0.5%) doses. Therefore, this novel in situ-forming nanogel shows great potential to be used in postsurgical pain control, improving the action of BVC, without losing its versatility of (infiltrative) application.

Improved efficacy of naproxen-loaded NLC for temporomandibular joint administration.

Inflammatory conditions of the temporomandibular joint (TMJ) and peripheral tissues affect many people around the world and are commonly treated with non-steroidal anti-inflammatory drugs (NSAIDs). However, in order to get desirable results, treatments with NSAIDs may take weeks, causing undesirable side effects and requiring repeated administration. In this sense, this work describes the development of an optimized nanostructured lipid carrier (NLC) formulation for intra-articular administration of naproxen (NPX). An experimental design (23) selected the best formulation in terms of its physicochemical and structural properties, elucidated by different methods (DLS, NTA, TEM, DSC, and ATR-FTIR). The chosen formulation (NLC-NPX) was tested on acute inflammatory TMJ nociception, in a rat model. The optimized excipients composition provided higher NPX encapsulation efficiency (99.8%) and the nanoparticles were found stable during 1 year of storage at 25 °C. In vivo results demonstrated that the sustained delivery of NPX directly in the TMJ significantly reduced leukocytes migration and levels of pro-inflammatory cytokines (IL-1ß and TNF-α), for more than a week. These results point out the NLC-NPX formulation as a promising candidate for the safe treatment of inflammatory pain conditions of TMJ or other joints.

Multivariate statistical analysis of chemical and electrochemical oscillators for an accurate frequency selection.

The effect of experimental parameters on the frequency of chemical oscillators has been systematically studied since the first observations of clock reactions. The approach is mainly based on univariate changes in one specific parameter while others are kept constant. The frequency is then monitored and the effect of each parameter is discussed separately. This type of analysis, however, does not take into account the multiple interactions among the controllable parameters and the synergic responses on the oscillation frequency. We have carried out a multivariate statistical analysis of chemical (BZ-ferroin catalyzed reaction) and electrochemical (Cu/Cu2O cathodic deposition) oscillators and identified the contributions of the experimental parameters on frequency variations. The BZ reaction presented a strong dependence on the initial concentration of sodium bromate and temperature, resulting in a frequency increase. The concentration of malonic acid, the organic substrate, affects the system but with lower intensity compared with the combination of sodium bromate and temperature. On the other hand, the Cu/Cu2O electrochemical oscillator was shown to be less sensitive to changes in the temperature. The applied current density and pH were the two parameters which most perturbed the system. Interestingly, the frequency behaved nonmonotonically with a quadratic dependence. The multivariate analysis of both oscillators exhibited significant differences - while the homogenous oscillator displayed a linear dependence with the factors, the heterogeneous one revealed a more complex dependence with quadratic terms. Our results may contribute, for instance, in the synthesis of self-organized materials in which an accurate frequency selection is required and, depending on its value, different physicochemical properties are obtained.

Evaluation of miscibility and polymorphism of synthetic and natural lipids for nanostructured lipid carrier (NLC) formulations by Raman mapping and multivariate curve resolution (MCR).

Nanostructured lipid carriers (NLC) belong to youngest lipid-based nanocarrier class and they have gained increasing attention over the last ten years. NLCs are composed of a mixture of solid and liquid lipids, which solubilizes the active pharmaceutical ingredient, stabilized by a surfactant. The miscibility of the lipid excipients and structural changes (polymorphism) play an important role in the stability of the formulation and are not easily predicted in the early pharmaceutical development. Even when the excipients are macroscopically miscible, microscopic heterogeneities can result in phase separation during storage, which is only detected after several months of stability studies. In this sense, this work aimed to evaluate the miscibility and the presence of polymorphism in lipid mixtures containing synthetic (cetyl palmitate, Capryol 90®, Dhaykol 6040 LW®, Precirol ATO5® and myristyl myristate) and natural (beeswax, cocoa and shea butters, copaiba, sweet almond, sesame and coconut oils) excipients using Raman mapping and multivariate curve resolution - alternating least squares (MCR-ALS) method. The results were correlated to the macroscopic stability of the formulations. Chemical maps constructed for each excipient allowed the direct comparison among formulations, using standard deviation of the histograms and the Distributional Homogeneity Index (DHI). Lipid mixtures of cetyl palmitate/Capryol®; cetyl palmitate/Dhaykol®; myristyl myristate/Dhaykol® and myristyl myristate/coconut oil presented a single histogram distribution and were stable. The sample with Precirol®/Capryol® was not stable, although the histogram distribution was narrower than the samples with cetyl palmitate, indicating that miscibility was not the factor responsible for the instability. Structural changes before and after melting were identified for cocoa butter and shea butter, but not in the beeswax. Beeswax + copaiba oil sample was very homogenous, without polymorphism and stable over 6 months. Shea butter was also homogeneous and, in spite of the polymorphism, was stable. Formulations with cocoa butter presented a wider histogram distribution and were unstable. This paper showed that, besides the miscibility evaluation, Raman imaging could also identify the polymorphism of the lipids, two major issues in lipid-based formulation development that could help guide the developer understand the stability of the NLC formulations.

Comparison of different chemometric methods to extract chemical and physical information from Raman images of homogeneous and heterogeneous semi-solid pharmaceutical formulations.

In formulations of nanostructured lipid carriers, lipid solid dispersions and self-emulsifying drug delivery systems, it is common that a solid or semi-solid lipid excipient is mixed with a liquid solvent or liquid lipid. Even when the excipients are visually miscible upon melting, they might have microscopic non-homogeneities which could lead to instability over time and future phase separation. Raman mapping associated with chemometric methods can be useful to evaluate spatial distribution of compounds, however it has not been extensively applied to the formulations mentioned above. The aim of this work was to compare the outcomes of three different chemometric methods - principal components analysis (PCA), multivariate curve resolution with alternating least squares (MCR-ALS) and independent components analysis (ICA) - to study two systems of very different degrees of microscopic miscibility: cetyl palmitate + Transcutol© (heterogeneous) and polyethylene glycol 6000 (PEG 6000) + Tween 80© (homogeneous). These two samples were chosen due to large differences in spatial distribution of the compounds over the pixels which could require different approaches for data treatment. The three methods were compared regarding recovered concentrations (or scores), signals (or loadings) and the need for matrix augmentation to obtain reliable results. Results showed that PCA loadings were the mathematical differences of the spectra of pure compounds for both samples, and therefore only 'contrast images' could be generated. MCR and ICA provided signals that could be related to the chemical components, however MCR presented rotational ambiguities even for the very heterogeneous sample, a situation in which ICA performed better as a blind search method. For the homogeneous sample, both methods showed rank deficiency and therefore the use of a matrix augmentation was necessary. ICA and PCA allowed identifying physical modifications in the homogeneous semi-solid PEG 6000/Tween 80® sample over the time, probably due to the folding/unfolding of the crystalline chains of PEG 6000. Therefore, this work discusses the ability of the three chemometrics methods to extract information from Raman spectra in order to characterize the chemical, spatial and even physical aspects of semi-solid pharmaceutical formulations, which could be of much use for stability studies of different drug delivery systems.

Optimization of biomass pretreatments using fractional factorial experimental design.

BACKGROUND: Pretreatments are one of the main bottlenecks for the lignocellulose conversion process and the search for cheaper and effective pretreatment methodologies for each biomass is a complex but fundamental task. Here, we used a 2ν5-1 fractional factorial design (FFD) to optimize five pretreatment variables: milling time, temperature, double treatment, chemical concentration, and pretreatment time in acid-alkali (EA) and acid-organosolv (EO) pretreatments, applied to elephant grass leaves. RESULTS: FFD allowed optimization of the pretreatment conditions using a reduced number of experiments and allowed the identification of secondary interactions between the factors. FFD showed that the temperature can be kept at its lower level and that the first acid step can be eliminated in both pretreatments, without significant losses to enzymatic hydrolysis. EA resulted in the highest release of reducing sugars (maximum of 205 mg/g substrate in comparison to 152 mg/g in EO and 40 mg/g in the untreated sample), using the following conditions in the alkali step: [NaOH] = 4.5% w/v; 85 °C and 100 min after ball milling the sample. The factors statistically significant (P < 0.05) in EA pretreatment were NaOH concentration, which contributes to improved hydrolysis by lignin and silica removal, and the milling time, which has a mechanical effect. For EO samples, the statistically significant factors to improved hydrolysis were ethanol and catalyst concentrations, which are both correlated to higher cellulose amounts in the pretreated substrates. The catalyst is also correlated to lignin removal. The detailed characterization of the main hemicellulosic sugars in the solids after pretreatments revealed their distinct recalcitrance: glucose was typically more recalcitrant than xylose and arabinose, which could be almost completely removed under specific pretreatments. In EA samples, the removal of hemicellulose derivatives was very dependent on the acid step, especially arabinose removal. CONCLUSION: The results presented herewith contribute to the development of more efficient and viable pretreatments to produce cellulosic ethanol from grass biomasses, saving time, costs and energy. They also facilitate the design of enzymatic cocktails and a more appropriate use of the sugars contained in the pretreatment liquors, by establishing the key recalcitrant polymers in the solids resulting from each processing step.

Optimised NLC: a nanotechnological approach to improve the anaesthetic effect of bupivacaine.

The short time of action and systemic toxicity of local anaesthetics limit their clinical application. Bupivacaine is the most frequently used local anaesthetic in surgical procedures worldwide. The discovery that its S(-) enantiomeric form is less toxic than the R(+) form led to the introduction of products with enantiomeric excess (S75:R25 bupivacaine) in the market. Nevertheless, the time of action of bupivacaine is still short; to overcome that, bupivacaine S75:R25 (BVCS75) was encapsulated in nanostructured lipid carriers (NLC). In this work, we present the development of the formulation using chemometric tools of experimental design to study the formulation factors and Raman mapping associated with Classical Least Squares (CLS) to study the miscibility of the solid and the liquid lipids. The selected formulation of the nanostructured lipid carrier containing bupivacaine S75:R25 (NLCBVC) was observed to be stable for 12 months under room conditions regarding particle size, polydispersion, Zeta potential and encapsulation efficiency. The characterisation by DSC, XDR and TEM confirmed the encapsulation of BVCS75 in the lipid matrix, with no changes in the structure of the nanoparticles. The in vivo analgesic effect elicited by NLCBVC was twice that of free BVCS75. Besides improving the time of action, no statistical difference in the blockage of the sciatic nerve of rats was found between 0.125% NLCBVC and 0.5% free BVCS75. Therefore, the formulation allows a reduction in the required anaesthesia dose, decreasing the systemic toxicity of bupivacaine, and opening up new possibilities for different clinical applications.

Natural lipids-based NLC containing lidocaine: from pre-formulation to in vivo studies.

In a nanotechnological approach we have investigated the use of natural lipids in the preparation of nanostructured lipid carriers (NLC). Three different NLC composed of copaiba oil and beeswax, sweet almond oil and shea butter, and sesame oil and cocoa butter as structural matrices were optimized using factorial analysis; Pluronic® 68 and lidocaine (LDC) were used as the colloidal stabilizer and model encapsulated drug, respectively. The optimal formulations were characterized by different techniques (IR-ATR, DSC, and TEM), and their safety and efficacy were also tested. These nanocarriers were able to upload high amounts of the anesthetic with a sustained in vitro release profile for 24h. The physicochemical stability in terms of size (nm), PDI, zeta potential (mV), pH, nanoparticle concentration (particles/mL), and visual inspection was followed during 12months of storage at 25°C. The formulations exhibited excellent structural properties and stability. They proved to be nontoxic in vitro (cell viability tests with Balb/c 3T3 fibroblasts) and significantly improved the in vivo effects of LDC, over the heart rate of zebra fish larvae and in the blockage of sciatic nerve in mice. The results from this study support that the proper combination of natural excipients is promising in DDS, taking advantage of the biocompatibility, low cost, and diversity of lipids.

Nanostructured lipid carriers as robust systems for topical lidocaine-prilocaine release in dentistry.

In dental practice, local anesthesia causes pain, fear, and stress, and is frequently the reason that patients abandon treatment. Topical anesthetics are applied in order to minimize the discomfort caused by needle insertion and injection, and to reduce the symptoms of superficial trauma at the oral mucosa, but there are still no efficient commercially available formulations. Factorial design is a multivariate data analysis procedure that can be used to optimize the manufacturing processes of lipid nanocarriers, providing valuable information and minimizing development time. This work describes the use of factorial design to optimize a process for the preparation of nanostructured lipid carriers (NLC) based on cetyl palmitate and capric/caprylic triglycerides as structural lipids and Pluronic 68 as the colloidal stabilizer, for delivery of the local anesthetics lidocaine and prilocaine (both at 2.5%). The factors selected were the excipient concentrations, and three different responses were followed: particle size, polydispersity index and zeta potential. The encapsulation efficiency of the most effective formulations (NLC 2, 4, and 6) was evaluated by the ultrafiltration/centrifugation method. The formulations that showed the highest levels of encapsulation were tested using in vitro release kinetics experiments with Franz diffusion cells. The NLC6 formulation exhibited the best sustained release profile, with 59% LDC and 66% PLC released after 20h. This formulation was then characterized using different techniques (IR-ATR, DSC, DRX, TEM, and NTA) to obtain information about its molecular organization and its physicochemical stability, followed during 14months of storage at 25°C. This thorough pre-formulation study represents an important advance towards the development of an efficient pre-anesthetic for use in dentistry.

Characterization of semi-solid Self-Emulsifying Drug Delivery Systems (SEDDS) of atorvastatin calcium by Raman image spectroscopy and chemometrics.

A methodology based on Raman image spectroscopy and chemometrics for homogeneity evaluation of formulations containing atorvastatin calcium in Gelucire(®) 44/14 is presented. In the first part of the work, formulations with high amounts of Gelucire(®) 44/14 (80%) and solvents of different polarities (diethylene glycol monoethyl ether, propyleneglycol, propylene glycol monocaprylate and glyceryl mono/dicaprylate/caprate) were prepared for miscibility screening evaluation by classical least squares (CLS). It was observed that Gelucire(®) 44/14 presented higher affinity for the lipophilic solvents glyceryl mono/dicaprylate/caprate and propylene glycol monocaprylate, whose samples were observed to be homogeneous, and lower affinity for the hydrophilic solvents diethylene glycol monoethyl ether and propyleneglycol, whose samples were heterogeneous. In the second part of the work, the ratio of glyceryl mono/dicaprylate/caprate and Gelucire(®) 44/14 was determined based on studies in water and allowed the selection of the proportions of these two excipients in the preconcentrate that provided supersaturation of atorvastatin upon dilution. The preconcentrate was then evaluated for homogeneity by partial least squares (PLS) and an excellent miscibility was observed in this proportion as well. Therefore, it was possible to select a formulation that presented simultaneously homogeneous preconcentrate and solubility enhancement in water by Raman image spectroscopy and chemometrics.

Analysis of pharmaceutical pellets: an approach using near-infrared chemical imaging.

Pharmaceutical pellets are spherical or nearly spherical multi-unit dosage forms designed to optimize pharmacokinetics and pharmacodynamics features of drug release. The distribution of the pharmaceutical ingredients in the layers and core is a very important parameter for appropriate drug release, especially for pellets manufactured by the process of layer gain. Physical aspects of the sample are normally evaluated by Scanning Electron Microscopy (SEM), but it is in many cases unsuitable to provide conclusive chemical information about the distribution of the pharmaceutical ingredients in both layers and core. On the other hand, methods based on spectroscopic imaging can be very promising for this purpose. In this work, a Near-Infrared Chemical Imaging (NIR-CI) method was developed and applied to the analysis of diclophenac sodium pellets. Since all the compounds present in the sample were known in advance, Classical Least Squares (CLS) was used for calculations. The results have shown that the method was capable of providing chemical information about the distribution of the active ingredient and excipients in the core and coating layers and therefore can be complementary to SEM for the pharmaceutical development of pellets.

Combined column-mobile phase mixture statistical design optimization of high-performance liquid chromatographic analysis of multicomponent systems.

A statistical approach for the simultaneous optimization of the mobile and stationary phases used in reversed-phase liquid chromatography is presented. Mixture designs using aqueous mixtures of acetonitrile (ACN), methanol (MeOH) and tetrahydrofuran (THF) organic modifiers were performed simultaneously with column type optimization, according to a split-plot design, to achieve the best separation of compounds in two sample sets: one containing 10 neutral compounds with similar retention factors and another containing 11 pesticides. Combined models were obtained by multiplying a linear model for column type, C8 or C18, by quadratic or special cubic mixture models. Instead of using an objective response function, combined models were built for elementary chromatographic criteria (retention factors, resolution and relative retention) of each solute or pair of solutes and, after their validation, the global separation was accomplished by means of Derringer's desirability functions. For neutral compounds a 37:12:8:43 (v/v/v/v) percentage mixture of ACN:MeOH:THF:H2O with the C18 column and for pesticides a 15:15:70 (v/v/v) ACN:THF:H2O mixture with the C8 column provide excellent resolution of all peaks.