ABSTRACT
The spin scattering induced by magnetic adsorbates on graphene was studied using a combination of transport measurements on a graphene field effect transistor decorated with atomically precise nickel clusters and first principles calculations. A comparative study before and after deposition of Ni4 clusters unambiguously corroborated the contribution of the added scatterers. An investigation of the spin scattering parameters as a function of the applied voltage indicated a cluster-induced Elliot-Yafet like spin scattering mechanism. Density functional theory calculations were used in combination with a tight-binding model to quantify the strength of the spin-orbit coupling terms induced by the adsorbed clusters.
ABSTRACT
Despite its broad potential applications, substitution of carbon by transition metal atoms in graphene has so far been explored only to a limited extent. We report the realization of substitutional Mn doping of graphene to a record high atomic concentration of 0.5%, which was achieved using ultralow-energy ion implantation. By correlating the experimental data with the results of ab initio Born-Oppenheimer molecular dynamics calculations, we infer that direct substitution is the dominant mechanism of impurity incorporation. Thermal annealing in ultrahigh vacuum provides efficient removal of surface contaminants and additional implantation-induced disorder, resulting in Mn-doped graphene that, aside from the substitutional Mn impurities, is essentially as clean and defect-free as the as-grown layer. We further show that the Dirac character of graphene is preserved upon substitutional Mn doping, even in this high concentration regime, making this system ideal for studying the interaction between Dirac conduction electrons and localized magnetic moments. More generally, these results show that ultralow energy ion implantation can be used for controlled functionalization of graphene with substitutional transition-metal atoms, of relevance for a wide range of applications, from magnetism and spintronics to single-atom catalysis.
ABSTRACT
This paper presents an experimental and theoretical investigation of a graphene-integrated electro-absorption modulator (EAM) based on a slot waveguide. Due to the enhanced light-matter interaction of graphene, the device exhibits an impressive modulation efficiency (0.038 dBµm-1V-1) and bandwidth (≈ 16 GHz). Starting from these results, we carried out an extensive design study, focusing on three crucial design parameters and exploring the associated trade-offs in insertion loss, extinction ratio and bandwidth. The simulation results offer valuable insights into the influence of each design parameter, reaffirming that our slot waveguide platform holds great promise for realizing a high-performance EAM balancing optical and electrical performance. It is important to note that the slot waveguide was defined through standard deep ultraviolet (DUV) lithography, allowing seamless integration into high-density systems.
ABSTRACT
The complexity of the water adsorption-desorption mechanism at the interface of transition metal dichalcogenides (TMDs) and its impact on their current transport are not yet fully understood. Here, our work investigates the swift intercalation of atmospheric adsorbates at the TMD and sapphire interface and between two TMD monolayers and probes its influence on their electrical properties. The adsorbates consist mainly of hydroxyl-based (OH) species in the subsurface region suggesting persistent water intercalation even under vacuum conditions, as determined by time-of-flight-secondary ion mass spectrometry (ToF-SIMS) and scanning tunneling microscopy (STM). Water intercalates there rapidly, within the order of a few minutes after being exposed to ambient atmosphere, this process tends to be partly reversible under (ultra)high vacuum, as observed by time-dependent scanning probe microscopy (SPM) based conductivity and ToF-SIMS measurements. A significant enhancement of the electronic properties is observed with the complete desorption of intercalated water clusters because of the pressure-induced melting effect under the tip of the SPM probe. Conversely, it also indicates that the characterization of TMD samples is substantially affected in air, in inert environments, and to some extent even in a vacuum if water intercalation is present. More importantly, STM analysis has uncovered a correlation between water intercalation and the presence of defects, showcasing their role in the gradual degradation of the material as it ages.
ABSTRACT
The adsorption and desorption kinetics of molecules is of significant fundamental and applied interest. In this paper, we present a new method to quantify the energy barriers for the adsorption and desorption of gas molecules on few-atom clusters, by exploiting reaction induced changes of the doping level of a graphene substrate. The method is illustrated for oxygen adsorption on Au3 clusters. The gold clusters were deposited on a graphene field effect transistor and exposed to O2. From the change in graphene's electronic properties during adsorption, the energy barrier for the adsorption of O2 on Au3 is estimated to be 0.45 eV. Electric current pulses increase the temperature of the graphene strip in a controlled way and provide the required thermal energy for oxygen desorption. The oxygen binding energy on Au3/graphene is found to be 1.03 eV and the activation entropy is 1.4 meV K-1. The experimental values are compared and interpreted on the basis of density functional theory calculations of the adsorption barrier, the binding energy and the activation entropy. The large value of the activation entropy is explained by the hindering effect that the adsorbed O2 has on the fluxional motion of the Au3 cluster.
ABSTRACT
We report the formation of nanobubbles on graphene with a radius of the order of 1 nm, using ultralow energy implantation of noble gas ions (He, Ne, Ar) into graphene grown on a Pt(111) surface. We show that the universal scaling of the aspect ratio, which has previously been established for larger bubbles, breaks down when the bubble radius approaches 1 nm, resulting in much larger aspect ratios. Moreover, we observe that the bubble stability and aspect ratio depend on the substrate onto which the graphene is grown (bubbles are stable for Pt but not for Cu) and trapped element. We interpret these dependencies in terms of the atomic compressibility of the noble gas as well as of the adhesion energies between graphene, the substrate, and trapped atoms.
ABSTRACT
The integration of graphene, and more broadly two-dimensional materials, into devices and hybrid materials often requires the deposition of thin films on their usually inert surface. As a result, strategies for the introduction of surface reactive sites have been developed but currently pose a dilemma between robustness and preservation of the graphene properties. A method is reported here for covalently modifying graphitic surfaces, introducing functional groups that act as reactive sites for the growth of high quality dielectric layers. Aryl diazonium species containing tri-methoxy groups are covalently bonded (grafted) to highly oriented pyrolytic graphite (HOPG) and graphene, acting as seeding species for atomic layer deposition (ALD) of Al2O3, a high-κ dielectric material. A smooth and uniform dielectric film growth is confirmed by scanning electron microscopy (SEM), atomic force microscopy (AFM) and electrical measurements. Raman spectroscopy showed that the aryl groups gradually detach from the graphitic surface during the Al2O3 ALD process at 150 °C, with the surface reverting back to the original sp2-hybridized state and without damaging the dielectric layer. Thus, the grafted aryl groups can act as a sacrificial seeding layer after healing the defects of the graphitic surface with annealing treatment.
ABSTRACT
In view of its epitaxial seeding capability, c-plane single crystalline sapphire represents one of the most enticing, industry-compatible templates to realize manufacturable deposition of single crystalline two-dimensional transition metal dichalcogenides (MX2) for functional, ultrascaled, nanoelectronic devices beyond silicon. Despite sapphire being atomically flat, the surface topography, structure, and chemical termination vary between sapphire terraces during the fabrication process. To date, it remains poorly understood how these sapphire surface anomalies affect the local epitaxial registry and the intrinsic electrical properties of the deposited MX2 monolayer. Therefore, molybdenum disulfide (MoS2) is deposited by metal-organic chemical vapor deposition (MOCVD) in an industry-standard epitaxial reactor on two types of c-plane sapphire with distinctly different terrace and step dimensions. Complementary scanning probe microscopy techniques reveal an inhomogeneous conductivity profile in the first epitaxial MoS2 monolayer on both sapphire templates. MoS2 regions with poor conductivity correspond to sapphire terraces with uncontrolled topography and surface structure. By intentionally applying a substantial off-axis cut angle (1° in this work), the sapphire terrace width and step height-and thus also surface structure-become more uniform across the substrate and MoS2 conducts the current more homogeneously. Moreover, these effects propagate into the extrinsic MoS2 device performance: the field-effect transistor variability reduces both within and across wafers at higher median electron mobility. Carefully controlling the sapphire surface topography and structure proves an essential prerequisite to systematically study and control the MX2 growth behavior and capture the influence on its structural and electrical properties.
ABSTRACT
We report the incorporation of substitutional Mn atoms in high-quality, epitaxial graphene on Cu(111), using ultralow-energy ion implantation. We characterize in detail the atomic structure of substitutional Mn in a single carbon vacancy and quantify its concentration. In particular, we are able to determine the position of substitutional Mn atoms with respect to the Moiré superstructure (i.e., local graphene-Cu stacking symmetry) and to the carbon sublattice; in the out-of-plane direction, substitutional Mn atoms are found to be slightly displaced toward the Cu surface, that is, effectively underneath the graphene layer. Regarding electronic properties, we show that graphene doped with substitutional Mn to a concentration of the order of 0.04%, with negligible structural disorder (other than the Mn substitution), retains the Dirac-like band structure of pristine graphene on Cu(111), making it an ideal system in which to study the interplay between local magnetic moments and Dirac electrons. Our work also establishes that ultralow-energy ion implantation is suited for substitutional magnetic doping of graphene. Given the flexibility, reproducibility, and scalability inherent to ion implantation, our work creates numerous opportunities for research on magnetic functionalization of graphene and other two-dimensional materials.
ABSTRACT
Two-dimensional transition metal dichalcogenide nanoribbons are touted as the future extreme device downscaling for advanced logic and memory devices but remain a formidable synthetic challenge. Here, we demonstrate a ledge-directed epitaxy (LDE) of dense arrays of continuous, self-aligned, monolayer and single-crystalline MoS2 nanoribbons on ß-gallium (III) oxide (ß-Ga2O3) (100) substrates. LDE MoS2 nanoribbons have spatial uniformity over a long range and transport characteristics on par with those seen in exfoliated benchmarks. Prototype MoS2-nanoribbon-based field-effect transistors exhibit high on/off ratios of 108 and an averaged room temperature electron mobility of 65 cm2 V-1 s-1. The MoS2 nanoribbons can be readily transferred to arbitrary substrates while the underlying ß-Ga2O3 can be reused after mechanical exfoliation. We further demonstrate LDE as a versatile epitaxy platform for the growth of p-type WSe2 nanoribbons and lateral heterostructures made of p-WSe2 and n-MoS2 nanoribbons for futuristic electronics applications.
ABSTRACT
Today, one of the key challenges of graphene devices is establishing fabrication processes that can ensure performance stability and repeatability and that can eventually enable production in high volumes. In this paper, we use up-scalable fabrication processes to demonstrate three five-channel wavelength-division multiplexing (WDM) transmitters, each based on five graphene-silicon electro-absorption modulators. A passivation-first approach is used to encapsulate graphene, which results in hysteresis-free and uniform performance across the five channels of each WDM transmitter, for a total of 15 modulators. Open-eye diagrams are obtained at 25 Gb/s using $ 2.5\;{{\rm V}_{{\rm pp}}} $2.5Vpp, thus demonstrating potential for multi-channel data transmission at ${5}\times {25}\;{\rm Gb/s}$5×25Gb/s on each of the three WDM transmitters.
ABSTRACT
Scanning tunneling microscopy and spectroscopy experiments under ultrahigh vacuum and low-temperature conditions have been performed on water-intercalated graphene on Pt(111). We find that the confined water layer, with a thickness around 0.35 nm, induces a strong hole doping in graphene, i.e., the Dirac point locates at round 0.64 eV above the Fermi level. This can be explained by the presence of a single "puckered bilayer" of ice-Ih, which has not been experimentally found on bare Pt(111), being confined in between graphene and Pt(111) surface. Moreover, the water intercalation makes graphene highly decoupled from the substrate, allowing us to reveal the intrinsic graphene phonons and double Rydberg series of even and odd symmetry image-potential states. Our work not only demonstrates that the electronic properties of graphene can be tuned by the confined water layer between graphene and the substrate, but also provides a generally applicable method to study the intrinsic properties of graphene as well as of other supported two-dimensional materials.
ABSTRACT
Graphene-based two-dimensional (2D) materials are promising candidates for a number of different energy applications. A particularly interesting one is in next generation supercapacitors, where graphene is being explored as an electrode material in combination with room temperature ionic liquids (ILs) as electrolytes. Because the amount of energy that can be stored in such supercapacitors critically depends on the electrode-electrolyte interface, there is considerable interest in understanding the structure and properties of the graphene/IL interface. Here, we report the changes in the properties of graphene upon adsorption of a homologous series of alkyl imidazolium tetrafluoroborate ILs using a combination of experimental and theoretical tools. Raman spectroscopy reveals that these ILs cause n-type doping of graphene, and the magnitude of doping increases with increasing cation chain length despite the expected decrease in the density of surface-adsorbed ions. Molecular modeling simulations show that doping originates from the changes in the electrostatic potential at the graphene/IL interface. The findings described here represent an important step in developing a comprehensive understanding of the graphene/IL interface.
ABSTRACT
The mechanism of graphene delamination from a Pt catalyst growth surface with electrochemical methods is studied. After a water intercalation step, an electrochemical graphene delamination process is done with a variety of different electrolytes. It is shown that (hydrogen or oxygen) bubble formation is not the main driving force to decouple graphene from its catalyst growth substrate. Ion intercalation is identified as the primary component for a fast graphene delamination process from its catalytic growth substrate. When the Pt/graphene sample is negatively charged, cations will intercalate, assuming they do not reduce within the electrochemical window of the solvent. This cation intercalation does result in graphene delamination. In the same way, anions intercalate in positively charged Pt/graphene samples when they do not react within the electrochemical window of the solvent. Furthermore, it is shown that applying a potential is sufficient (current is not needed) to induce ion intercalation and, as a result, graphene delamination. These findings open the door to avoid Na+ or K+ contamination introduced during currently described electrochemical graphene delamination. Alternative electrolytes (i.e. ammonium hydroxide and tetraethylammonium hydroxide) are proposed, due to the absence of alkali contaminants and rapid cation intercalation to delaminate graphene.
ABSTRACT
The key steps of a transfer of two-dimensional (2D) materials are the delamination of the as-grown material from a growth substrate and the lamination of the 2D material on a target substrate. In state-of-the-art transfer experiments, these steps remain very challenging, and transfer variations often result in unreliable 2D material properties. Here, it is demonstrated that interfacial water can insert between graphene and its growth substrate despite the hydrophobic behavior of graphene. It is understood that interfacial water is essential for an electrochemistry-based graphene delamination from a Pt surface. Additionally, the lamination of graphene to a target wafer is hindered by intercalation effects, which can even result in graphene delamination from the target wafer. For circumvention of these issues, a direct, support-free graphene transfer process is demonstrated, which relies on the formation of interfacial water between graphene and its growth surface, while avoiding water intercalation between graphene and the target wafer by using hydrophobic silane layers on the target wafer. The proposed direct graphene transfer also avoids polymer contamination (no temporary support layer) and eliminates the need for etching of the catalyst metal. Therefore, recycling of the growth template becomes feasible. The proposed transfer process might even open the door for the suggested atomic-scale interlocking-toy-brick-based stacking of different 2D materials, which will enable a more reliable fabrication of van der Waals heterostructure-based devices and applications.
ABSTRACT
The interplay between magnetocrystalline anisotropy and exchange bias is investigated in CoO/Co bilayer films, which are grown epitaxially on MgO (0 0 1), by magnetization reversal measurements based on the anisotropic magnetoresistance (AMR) effect. While an asymmetric magnetization reversal survives after training for cooling field (CF) along the hard axis, the magnetization reversal becomes symmetric and is dominated in both branches of the hysteresis loop by domain wall motion before and after training for CF along the easy axis. When performing an in-plane hysteresis loop perpendicular to the CF, the hysteresis loop along the easy axis becomes asymmetric: magnetization rotation dominates in the ascending branch, while there is a larger contribution of domain wall motion in the descending branch. Furthermore, the azimuthal angular dependence of the AMR shows two minima after performing a perpendicular hysteresis loop, instead of only one minimum after training. Relying on the extended Fulcomer and Charap model, these effects can be related to an increased deviation of the average uncompensated antiferromagnetic magnetization from the CF direction. This model provides a consistent interpretation of training and asymmetry of the magnetization reversal for epitaxial films with pronounced magnetocrystalline anisotropy as well as for the previously investigated polycrystalline films.
ABSTRACT
The training effect and asymmetry in exchange-coupled polycrystalline CoO/Co bilayers with in-plane magnetization has been investigated. This system is selected for its large training effect and initial asymmetry of the magnetic hysteresis after field cooling, which is removed after training. Applying an in-plane magnetic field perpendicular to the cooling field largely restores the untrained state with its pronounced asymmetry. The possibility to reinduce the asymmetry strongly depends on the magnitude of the perpendicular field, providing the key to identify the physical origin of training and removal of the asymmetry. These effects result from misalignment between the ferromagnetic magnetization and the uncompensated magnetization of the granular antiferromagnet.
ABSTRACT
We performed a detailed study of the training effect in exchange biased CoO/Co bilayers. High-resolution measurements of the anisotropic magnetoresistance (AMR) display an asymmetry in the first magnetization reversal process and training in the subsequent reversal processes. Surprisingly, the AMR measurements as well as magnetization measurements reveal that it is possible to partially reinduce the untrained state by performing a hysteresis measurement with an in-plane external field perpendicular to the cooling field. Indeed, the next hysteresis loop obtained in a field parallel to the cooling field resembles the initial asymmetric hysteresis loop, but with a reduced amount of spin rotation occurring at the first coercive field. This implies that the antiferromagnetic domains, which are created during the first reversal after cooling, can be partially erased.
ABSTRACT
We measured the intrinsic domain wall resistance (DWR) of 180 degrees Ne el walls in a polycrystalline Co thin film deposited on top of a patterned antiferromagnetic CoO template. After field cooling through the CoO blocking temperature, exchange bias induces a spatially modulated coercivity of the Co film, resulting in a periodic domain pattern with 180 degrees Ne el walls. The intrinsic DWR is determined unambiguously by using rotating magnetic fields that result in a reversible creation and annihilation of the Ne el walls. In contrast with earlier reports, the DWR is positive and in agreement with models based on the giant magnetoresistance mechanism. A reliable, quantitative determination of the DWR requires careful numerical evaluation of the anisotropic magnetoresistance effect.