Tuning the Photoresponse of Nano-Heterojunction: Pressure-Induced Inverse Photoconductance in Functionalized WO3 Nanocuboids.

Inverse photoconductivity (IPC) is a unique photoresponse behavior that exists in few photoconductors in which electrical conductivity decreases with irradiation, and has great potential applications in the development of photonic devices and nonvolatile memories with low power consumption. However, it is still challenging to design and achieve IPC in most materials of interest. In this study, pressure-driven photoconductivity is investigated in n-type WO3 nanocuboids functionalized with p-type CuO nanoparticles under visible illumination and an interesting pressure-induced IPC accompanying a structural phase transition is found. Native and structural distortion induced oxygen vacancies assist the charge carrier trapping and favor the persistent positive photoconductivity beyond 6.4 GPa. The change in photoconductivity is mainly related to a phase transition and the associated changes in the bandgap, the trapping of charge carriers, the WO6 octahedral distortion, and the electron-hole pair recombination process. A unique reversible transition from positive to inverse photoconductivity is observed during compression and decompression. The origin of the IPC is intimately connected to the depletion of the conduction channels by electron trapping and the chromic property of WO3. This synergistic rationale may afford a simple and powerful method to improve the optomechanical performance of any hybrid material.

Development of a single-cell X-ray fluorescence flow cytometer.

An X-ray fluorescence flow cytometer that can determine the total metal content of single cells has been developed. Capillary action or pressure was used to load cells into hydrophilic or hydrophobic capillaries, respectively. Once loaded, the cells were transported at a fixed vertical velocity past a focused X-ray beam. X-ray fluorescence was then used to determine the mass of metal in each cell. By making single-cell measurements, the population heterogeneity for metals in the µM to mM concentration range on fL sample volumes can be directly measured, a measurement that is difficult using most analytical methods. This approach has been used to determine the metal composition of 936 individual bovine red blood cells (bRBC), 31 individual 3T3 mouse fibroblasts (NIH3T3) and 18 Saccharomyces cerevisiae (yeast) cells with an average measurement frequency of ∼4 cells min(-1). These data show evidence for surprisingly broad metal distributions. Details of the device design, data analysis and opportunities for further sensitivity improvement are described.

Note: application of a pixel-array area detector to simultaneous single crystal X-ray diffraction and X-ray absorption spectroscopy measurements.

X-ray diffraction (XRD) and X-ray absorption spectroscopy (XAS) are two main x-ray techniques in synchrotron radiation facilities. In this Note, we present an experimental setup capable of performing simultaneous XRD and XAS measurements by the application of a pixel-array area detector. For XRD, the momentum transfer in specular diffraction was measured by scanning the X-ray energy with fixed incoming and outgoing x-ray angles. By selecting a small fixed region of the detector to collect the XRD signal, the rest of the area was available for collecting the x-ray fluorescence for XAS measurements. The simultaneous measurement of XRD and X-ray absorption near edge structure for Pr0.67Sr0.33MnO3 film was demonstrated as a proof of principle for future time-resolved pump-probe measurements. A static sample makes it easy to maintain an accurate overlap of the X-ray spot and laser pump beam.

Direct synthesis of bimetallic Pd3Ag nanoalloys from bulk Pd3Ag alloy.

We report a transformative, all inorganic synthesis method of preparing supported bimetallic Pd(3)Ag alloy nanoparticles. The method involves breaking down bulk Pd(3)Ag alloy into the nanoparticles in liquid lithium, converting metallic Li to LiOH, and transferring Pd(3)Ag nanoparticles/LiOH mixture onto non-water-soluble supports, followed by leaching off the LiOH with water under ambient conditions. The size of the resulting Pd(3)Ag nanoparticles was found narrowly distributed around 2.3 nm characterized by transmission electron microscope (TEM). In addition, studies by X-ray diffraction (XRD), extended X-ray absorption fine structure (EXAFS) spectroscopy, and X-ray absorption near edge structure (XANES) spectroscopy showed that the resulting Pd(3)Ag nanoparticles inherited similar atomic ratio and alloy structure as the starting material. The synthesized Pd(3)Ag nanoparticles exhibited excellent catalytic activity toward hydrogenation of acrolein to propanal.

Synthesis of supported platinum nanoparticles from Li-Pt solid solution.

Platinum nanoparticle catalysts are essential for achieving energy-efficient and greener chemical processes that involve breaking or establishing of H-H, C-H, or O-H bonds. In this work, we report an innovative top-down strategy to prepare the supported Pt nanoparticles with an average size of approximately 2 nm, starting directly from bulk metallic Pt by metallurgical method. Bulk platinum was dissolved in liquid lithium and ruptured into nanoparticles. This Li-Pt liquid alloy was quenched into Li-Pt solid solution. The lithium content was further converted into LiOH. The resulting powder of Pt nanoparticles in LiOH can be mixed with any nonaqueous support materials. Thereafter, the LiOH can be selectively leached off by water, allowing Pt nanoparticles to be adsorbed on the desired support material. Transmission electron microscope and extended X-ray absorption fine structure analyses demonstrated that the as-formed Pt nanoparticles have an average size of around 2 nm. The carbon-supported Pt nanoparticles prepared by this method inherit more characteristics of their bulk counterparts so that high specific catalytic activity of bulk Pt is maintained, which is confirmed by a preliminary electrocatalytic characterization of oxygen reduction reaction (ORR).

Substitutional alloy of Ce and Al.

The formation of substitutional alloys has been restricted to elements with similar atomic radii and electronegativity. Using high-pressure at 298 K, we synthesized a face-centered cubic disordered alloy of highly dissimilar elements (large Ce and small Al atoms) by compressing the Ce(3)Al intermetallic compound >15 GPa or the Ce(3)Al metallic glass >25 GPa. Synchrotron X-ray diffraction, Ce L(3)-edge absorption spectroscopy, and ab initio calculations revealed that the pressure-induced Kondo volume collapse and 4f electron delocalization of Ce reduced the differences between Ce and Al and brought them within the Hume-Rothery (HR) limit for substitutional alloying. The alloy remained after complete release of pressure, which was also accompanied by the transformation of Ce back to its ambient 4f electron localized state and reversal of the Kondo volume collapse, resulting in a non-HR alloy at ambient conditions.