Nanomaterials - A promising solution for textile and fossil fuel generated pollutants.

This review approach is divided into two scopes to focus the pollution threats. We cover the applications of nanomaterials to curtail the pollution induced by fossil fuel combustion, and textile dye effluents. Toxic emissions released from automobile exhaust that comprise of NOX. SOX and PAHs compile to harsh breathing and respiratory troubles. The effluents generated from the mammoth textile and leather industry is potential threat to beget massive health issues to human life, and environmental problem. Part I projects the broad envisage on role of nano materials in production of alternative biofuels. In addition, green sources for synthesizing nanomaterials are given special importance. Nano catalyst's utilization in bio-derived fuels such as biogas, bio-oil, bioethanol, and biodiesel are catered to this article. Part II cover the current statistics of textile effluent pollution level in India and its steps in confronting the risks of pollution are discussed. A clear picture of the nano techniques in pre-treatment, and the recent nano related trends pursued in industries to eliminate the dyes and chemicals from the discharges is discussed. The substantial aspect of nano catalysis in achieving emission-free fuel and toxic-free effluents and the augmentation in this field is conferred. This review portrays the dependency on nano materials & technology for sustainable future.

Effect of solar powered MgO/graphene nano catalysed biodiesel production from Scomber scombrus.

The aim of the work is to find the efficiency of solar power in biodiesel preparation from mackerel fish. The paper also focusses on the ability of MgO/graphene prepared by one-pot synthesis using combustion methodology. The physicochemical properties of the material were analysed by XRD, N2 sorption studies, BET sorption analysis and SEM. The adsorption studies revealed the porosity of the graphene is intact, and the morphology studies indicated that MgO is uniformly distributed on the graphene surface. The highest biodiesel yield of 98.95% was obtained using the solar-powered Fresnel solar concentrator at 12.30 p.m in 6 min reaction time using 3 wt% MgO/GO catalyst at 65 °C. Conventional heating produced only 75% biodiesel at the same reaction condition, consuming25 min to complete. The solar assisted biodiesel had better HHV of 37.81 MJ/Kg, viscosity of 4.3 mm2/s, pour point of -15 °C, and a density of 0.875 g/mL. The optimized catalyst showed a shelf life of 5 cycles. The results portray the efficacy of natural energy source in alternative liquid fuel production.

Bio-fabrication of calcium oxide nanoparticles from Coccinia grandis as a potential photocatalyst for dye degradation with antimicrobial activity.

In the current study, Coccinia grandis fruit extract was used to synthesize calcium oxide nanoparticles (CaO NPs) in an economical and environmentally friendly manner. UV-Vis spectroscopy and Fourier transform infrared spectroscopy revealed that the phytoconstituents found in Coccinia grandis fruit extract facilitated the production of CaO NPs by acting as better stabilizing, biodegradable, and reducing agents. The synthesized CG-CaO NPs were also tested for photocatalytic activity in the breakdown of selective dyes such as methyl red, methyl orange, and methylene blue in the presence of sunlight. The degradation percentage was determined by analyzing the color removal rates for all dye components. After 6 h of reaction, the IC50 values for methyl red, methyl orange, as well as methylene blue dyes were 73, 107, and 133, respectively. The CG-CaO NPs were further evaluated for their antimicrobial activity against specific bacteria and fungi using the agar-well diffusion method. 200 µg/mL CG-CaO NPs inhibited Aspergillus niger, Escherichia coli, Salmonella typhi, Streptococcus mutans, and Staphylococcus aureus at zones of 13, 14, 16, 14, and 15 mM, respectively. Further checkerboard assay confirmed the antagonism effect with gentamicin. Also, Artemia salina toxicity assay showed that the LD50 value of CaO NPs was 400 µg/mL of CaO NPs. The findings confirm that Coccinia grandis-mediated CG-CaO NPs can be used effectively in antimicrobial and environmental settings.

Catalytic pyrolysis of fish waste oil using ZSM-5 catalyst for the production of renewable biofuel.

This present study enlightens the eco-friendly green synthesis of ZSM-5 from natural clay montmorillonite, and its proper incorporation with 'Ni'. Nickle (Ni) was wet impregnated onto HZSM-5 and the resulting catalyst was characterized by various techniques including XRD, BET, N2 Sorption Studies, TPD, SEM and TEM techniques. The SEM images revealed the uniform distribution of Ni over HZSM-5 zeolite catalyst and the XRD results indicated the undistorted crystalline structure of HZSM-5 even after impregnation of Ni. The latter part of the work concentrates on the strength of the catalyst in cracking oil derived from discarded fish parts. Discarded fish waste was pyrolyzed to obtain the fish oil, which was then used for cracking studies. The fish oil was efficiently converted (99% conversion) by Ni/ZSM5 (50 wt %) and yielded 70% liquid fractions, which formed gasoline (78.6%), kerosene (12.3%) and diesel (9.1%). The research is a complete parcel to examine the working potential of the produced biofuel in pre-existing engines. The quality of gasoline fraction was tested according to ASTM standards, which showed that the heating value was slightly lower compared to fossil gasoline. The torque and brake fuel consumption were also examined and it indicated that the fish oil derived gasoline fuel may need to be mixed with the commercial gasoline to optimize its performance.

An investigation on the conversion of infertile soil into fertile soil using crop waste as a remedial (compost) approach and its influence on Vigna mungo biometric and biomolecule profile.

The sustainable management of huge volume of agricultural waste in India can be resolved through composting and used as soil amendment. Agriculture waste compost amendments can optimistically alter the physicochemical (pH, C, N, & P) as well as biological nature (microbial activity/biomass and enzymatic activity) of infertile soil. Hence this study, the agriculture wastes such as sugarcane trash, corn stover, and pearl millet stalks were converted to composite through decomposition pit. Interestingly, test crops residues individual composites and their mixed form contained considerable quantity of vital elements like TC, TN, TP, TK, and C:N ratio and can effectively convert infertile soil to fertile soil. These test crop composites also had a significant impact on MBN (42.3 µg g-1), MBC (198.4 µg g-1), and MBP (196.4 µg g-1) in test soil, as well as dehydrogenase and alkaline phosphatase enzyme activity. However, the mixed composite effects are significantly greater than the individual test crop composite effects. Furthermore, it effectively remediates/converts infertile soil to fertile soil, and it ultimately demonstrated positive effects on Vigna mungo biometric (SH, RH, WB, and DB) and biomolecule (total chlorophyll, total carbohydrate, and total proteins) profiles, followed by individual test crop composites. According to the findings of this study, the incorporation of crop residue-based mixed composite significantly transforms infertile soil into fertile soil and promotes the growth of V. mungo.

Evaluation of Zn-Cd-Sn-S nanostructures for in vitro pyrene degradation and antimicrobial activity.

The present work describes the fabrication of the quaternary Zn-Cd-Sn-S nanostructure and its use in photocatalytic remediation of the biological contaminant pyrene from water resources. Nanostructures fabricated were characterized by XRD, UV-DRS, FTIR, DLS, EDX, and SEM. In addition, an agar well diffusion test was conducted to determine the antimicrobial activity. Zn-Cd-Sn-S (ZCSS) nanostructures were evaluated for their photocatalytic degrading potential by using pyrene as a model pollutant and evaluating the effects of parameters like initial pyrene concentration, nanocatalyst dosage, solution pH, and light sources during batch adsorption. Nanostructures had a size of 16.74 nm according to the XRD analysis. With a 300 min time interval, ZCSS nanostructures achieved the highest removal rate of 86.3%. Pyrene degradation metabolites were identified using GC-MS analysis of the degraded samples. A Freundlich isothermal (R2 0.9) and pseudo-first-order (R2 0.952) reaction kinetic path best fit the adsorption results for pyrene by the fabricated ZCSS nanostructure, based on the adsorption and kinetic studies. Zn-Cd-Sn-S exhibited the highest antibacterial activity against Staphylococcusaureus (22.4 mM). Due to the combined synergistic actions of the constituent metals, this quaternary nanostructure exhibited exceptional photocatalytic activity. To our est knowledge, the ZCSS nanostructure was made and used to remove pyrene by photocatalysis and fight microbes. Ultimately, the ZCSS nanostructure was found to be an effective photocatalyst for eradicating pathogenic microbes from water.

Synthesis of magnetic biochar composite using Vateria indica fruits through in-situ one-pot hydro-carbonization for Fenton-like catalytic dye degradation.

The present study reports the synthesis, characterization, and application of sustainable magnetic biochar composite. The inedible fruits of Vateria indica, a powerful ayurvedic plant were hydrothermally transformed into magnetic biochar (BC-Fe3O4) in a single step and characterized by several sophisticated techniques. FESEM analysis portrayed fibrous irregular mesh-like biochar with surface clustered Fe3O4 nanoparticles, while the incidence of carbon, oxygen, and iron in the elemental analysis by EDS established magnetic biochar formation. Numerous peaks consistent with planes of (220), (311), (400), (422), (511), (440), and (120) also substantiated the occurrence of magnetite nanoparticles and biochar respectively, as analyzed by XRD. XPS analysis showed signals at 285.65 eV, 533.28 eV, 711.08 eV, and 724.68 eV corroborating a strong C-O bond, O1s orbit, Fe2+, and Fe3+ respectively. BC-Fe3O4 was superparamagnetic with saturation magnetization of 4.74 emu/g, as per VSM studies, while its specific surface area, pore volume, and pore diameter were 5.74 m2/g, 0.029 cm3/g, and 20.86 nm respectively. The Fenton-like degradation of methylene blue (5.0-25.0 ppm) was accomplished by synthesized BC-Fe3O4, in the presence of H2O2. Within 180 min, almost complete degradation was achieved, with first-order kinetics having rate constants between 0.0299 and 0.0167 min-1. Stability and recyclability studies performed over 7 cycles exhibited unaltered degradation between 93.98 and 97.59%. This study exhibits the exceptional characteristics and degradation capabilities of BC-Fe3O4 synthesized from a sustainable plant biomass.

Enhanced photocatalytic degradation of polycyclic aromatic hydrocarbons (PAHs) Using NiO nanoparticles.

The oncogenic and genetic properties of anthracene, a member of the polycyclic aromatic hydrocarbons (PAHs) family, pose a significant health threat to humans. This study aims to investigate the photocatalytic decomposition of anthracene under various conditions, such as different concentrations of PAHs, varying amounts of NiO (nickel oxide) nanoparticles, and different pH levels under ultraviolet light and sunlight. The synthesized NiO nanoparticles showed surface plasma resonance at 230 and 360 nm, while XRD and SEM analysis confirmed the nanoparticles were cubic crystalline in structure with sizes ranging between 37 and 126 nm. NiO nanoparticles exhibited 79% degradation of pyrene at 2 µg/mL of anthracene within 60 min of treatment. NiO at 10 µg/mL concentration showed significant adsorption of 57%, while the adsorption method worked efficiently (72%) at 5 pH. Photocatalytic degradation was confirmed by isotherm and kinetic studies through monolayer adsorption and pseudo-first-order kinetics. Further, the absorption process was confirmed by performing GC-MS analysis of the NiO nanoparticles. On the other hand, NiO nanoparticles showed antimicrobial activity against Gram negative and Gram-positive bacteria. Therefore, the present work is one of its kind proving the dual application of NiO nanoparticles, which makes them suitable candidates for bioremediation by treating PAHs and killing pathogenic bacteria.

Environmental impacts and effects on greenhouse gas emissions in shrimp feed production system for aquaculture - A case study in India.

Attributional life cycle assessment study examines the environmental impact of raw materials, machinery, and unit operations. In the present work, an attributional life cycle assessment (LCA) was employed to assess the environmental and greenhouse gas impacts of a shrimp feed production system. A commercial shrimp feed mill in Tamil Nadu, India, provided inventory data for one-ton shrimp feed (functional unit) for a Cradle-to-Gate evaluation using environmental impact methodologies, specifically Impact 2002+ in SimaPro® (V9.3.0.3) software. The results showed that human health (0.003357 DALY), ecosystem quality (2720.518 PDF × m2 × yr), climate change (2031.696 kg CO2 eq), and resources (71019.42 MJ primary) were the most significantly impacted. The human health category was found to be the most prominent after normalization and weighting (0.47 pt), and strategies were suggested accordingly. The GWP20 and GWP100 measures for long-term climate change were calculated to be 8.7 and 7.33 kg CO2 eq, respectively. Cast iron used in machinery production (GWP 20-15.40%, GWP100-134.5%) and electricity use (GWP 20-6.13%, GWP 100-6.9%) accounted for sizable portions of the burden. Feed production is estimated to contribute 0.2% of global CO2 emissions within the proposed global context. These findings are significant regarding economically and environmentally sustainable shrimp feed production worldwide.

Antimicrobial and anti-diabetic efficiency of Polyalthia longifolia leaf extracts and major compounds characterization.

This research was performed to investigate the bactericidal and fungicidal competence of extracts (methanol and petroleum ether extract) of Polyalthia longifolia leaf. Moreover, the major active compounds present in the effective crude extract (either methanol or petroleum ether extract) was determined through initially with UV-Vis spectra, FTIR, and GC-MS analyses. The methanol extract alone showed remarkable bactericidal and fungicidal activity against the bacterial (S. pyogenes > E. coli > S. aureus > S. pneumoniae > C. difficile > P. aeruginosa) and fungal (A. clavatus > C. albicans > A. niger > A. fumigatus > C. tropicalis > C. auris) pathogens at increased concentration (12.5 mg mL-1) than petroleum ether extract. The MIC and MBC values of methanol extract were found as 10-20 mg mL-1 and 30-40 mg mL-1 respectively. The MFC value of methanol extract was found as 10-20 mg mL-1. These MIC, MBC, and MFC values of methanol extract were considerably greater than petroleum ether extract. The FTIR and GC-MS characterization studies revealed that the presence of more acre functional groups belonging to bioactive compounds such as Z)-7-Hexadecenal, Aromandendrene, α-Curcumene, Caryophyllene, Methyl 14-methyl Pentadecanoat, Methyl trans-13-Octadecenoate, 9-Octadecenoic acid (Z)-, and 2-hydroxy-1- (hydroxymethyl)ethyl. As a result of these findings, it is possible that P. longifolia leaf methanol extract contains medicinally important bioactive substances with bactericidal and fungicidal properties.

Deciphering the photocatalytic degradation of polyaromatic hydrocarbons (PAHs) using hausmannite (Mn3O4) nanoparticles and their efficacy against bacterial biofilm.

Polyaromatic hydrocarbons (PAHs) are life-threatening organic pollutants that severely threaten ecosystems worldwide due to their poisonous qualities, cancer-causing properties, and mutation-causing qualities. Water and soil together form a critical component of the ecosystem that supports all life. Due to the pollutants that are being disposed of in them, their characteristics have changed, and their toxicity has increased. The goal of this study was to investigate the ability of hausmannite nanoparticles to degrade fluorene from soil and water. Using the chemical method, hausmannite nanoparticles were synthesized and further characterization was performed using UV-Vis, FTIR, DLS, XRD, and SEM-EDAX. Hausmannite significantly degraded fluorene using the batch adsorption method. The degradation was also confirmed by performing reactive kinetics using Freundlich's isotherm model and Langmuir's pseudo-second-order model of soil and water. In addition to the degradation efficacy, hausmannite was also proved to inhibit biofilm formation by Pseudomonas aeruginosa. The findings of the experiments confirmed the presence of hausmannite nanoparticles, as well as their physical properties, chemical properties, degradation properties, and parameters of the kinetic study. As a result, synthesized nanoparticles have been extensively utilized as a low-cost option for removing pollutants and microbial biofilm.

A review on recent advancements in extraction, removal and recovery of phenols from phenolic wastewater: Challenges and future outlook.

Water pollution is the major problem seen in today's scenario and even pollutants at low concentration harms our environment. In industrial sector usage of phenol is seen even at low concentrations. The interaction of phenol in the environment provides adverse effects to living beings. This review focuses on the toxicity of phenol and its impact towards environment and human health. The treatment techniques such as distillation, extraction, wet air oxidation, membrane process, electrochemical oxidation, biological treatment and finally adsorption techniques were discussed. Among many treatment techniques so far utilized in the treatment of phenol, adsorption was considered as one of the best technique due to its advantages such as reusability, ease in operation, large availability etc., This review also highlights the adsorption technique for the cleaner removal of phenol from aqueous solution with novel as well as low-cost adsorbents in the removal of phenolic compounds. This review also discusses about the drawbacks and issues related with adsorption of phenolic compounds.

Fabrication and characterization of manganese dioxide (MnO2) nanoparticles and its degradation potential of benzene and pyrene.

MnO2 nanoparticles have a wide range of applications, including catalytic abilities due to their oxygen reduction potential. Industrial processes and the burning of organic materials released PAHs into the biosphere which have adverse effects on living organisms when continually exposed. In this study, MnO2 nanoparticles were synthesized chemically using sodium thiosulphate as reducing agent. MnO2 nanoparticles were characterized using UV-visible adsorption spectroscopy and Fourier Transform Infrared Spectroscopy (FTIR). A X-Ray Diffraction Spectrophotometer (XRD), a Scanning Electron Microscopy - Energy Dispersive X-Ray Analyzer (SEM-EDAX), and Dynamic Light Scattering (DLS) were used to identify the crystalline nature and particle size of the fabricated MnO2 nanoparticles. Batch adsorption studies were conducted to identify the optimal conditions for better benzene and pyrene adsorption from aqueous solution using MnO2 nanoparticles. They are also effective in degrading benzene and pyrene by batch adsorption as determined by their adsorption isotherms and kinetics.

In vitro biofilm inhibition efficacy of Aerva lanata flower extract against Gram negative and Gram-positive biofilm forming bacteria and toxicity analysis using Artemia salina.

A biofilm consists of Gram positive and Gram-negative bacteria enclosed in a matrix. Industrial biofouling is caused by biofilms, which can exhibit antimicrobial resistance during infections. Many biofilm studies find that nearly all biofilm communities consist of Gram positive and Gram-negative bacteria. It is therefore necessary to better understand the conserved themes in biofilm formation to develop therapeutics based on biofilm formation. Plant extracts can effectively combat pathogenic bacterial biofilms. This study evaluated the antibacterial and antibiofilm activity of Aerva lanata flower extract against Staphylococcus aureus and Pseudomonas aeruginosa. Methanol extract of dried A. lanata flower was tested against S. aureus and P. aeruginosa to determine the antibacterial activity (10, 25, 50, 75, 100 µg/mL) resulted in a maximum of 0.5-1 log reduction and 2 log reduction in comparison to the control or untreated bacterial cells respectively. A. lanata showed maximum biofilm inhibition up to 1.5-fold and 1-fold against P. aeruginosa and S. aureus. Light microscopic analysis of biofilm treated with A. lanata extract showed efficient distortion of the biofilm matrix. Further, the in vivo analysis of A. lanata in the Artemia salina brine shrimp model showed >50% survival and thus proving the efficacy of A. lanata extract in rescuing the brine shrimps against P. aeruginosa and S. aureus infection.

Process intensification approaches in wastewater and sludge treatment for the removal of pollutants.

Process Intensification (PI) is the modification or integration of conventional or novel processes within a single unit operation in order to improve product quality and reduce waste. PI offers numerous advantages, including a reduction in the initial and operational costs, an improvement in product quality/quantity, the generation of less waste, and an increase in process safety. The synergistic effect of PI in comparison to the conventional procedure ensures maximizing resource efficiency. PI can be accomplished in two ways: either by integrating various processes or by modifying the design of equipment to improve operational efficiency. In this regard, the present review provides a comprehensive insight into the application of PI in wastewater and sludge treatment methods and discusses the operational advantages. This review provides a comprehensive list of different PI approaches applied in wastewater and sludge treatment to remove pollutants and the various equipment, techniques and reactors used in PI. The second section addresses the challenges of PI in wastewater treatment that removes dyes, pesticides, organic and inorganic pollutants, micro- and nano-plastics, persistent organic pollutants, pharmaceutical and personal care pollutants.

Hibiscus rosa-sinensis as a potential hyperaccumulator in metal contaminated magnesite mine tailings.

Mining is one of the major contributors for land degradation and severe heavy metals based soil pollution. In this study, the physicochemical properties of magnesite mine soil was investigated and assess the optimistic and eco-friendly remediation approach with Hibiscus rosa-sinensis with the effect of pre-isolated Acidithiobacillus thiooxidans. The physicochemical properties analysis results revealed that most the parameter were either too less or beyond the permissible limits. The pre-isolated A. thiooxidans showed remarkable multi-metal tolerance up to 800 µg mL-1 concentration of Cr, Cd, Pb, and Mn. Heavy metal content in polluted soil was reduced to avoid more metal toxicity by diluting with fertile control soil as 80:20 and 60:40. The standard greenhouse experiment was performed to evaluate the phytoextraction potential of H. rosa-sinensis under the influence of A. thiooxidans in various treatment groups (G-I to G-V). The outcome of this investigation was declared that the multi-metal tolerant A. thiooxidans from G-III and G-II showed remarkable effect on growth and phytoextraction ability of H. rosa-sinensis on metal polluted magnesite mine soil in 180 d greenhouse study. These results suggested that the combination of H. rosa-sinensis and A. thiooxidans could be used as an excellent hyper-accumulator to extract metal pollution from polluted soil.

Bio/phyremediation potential of Leptospirillum ferrooxidans and Ricinus communis on metal contaminated mine sludge.

The heavy metal pollution is a serious environmental pollution around the globe and threatens the ecosystem. The physicochemical traits (pH, Electrical conductivity, hardness, NPK, Al, Fe, Cd, Cr, Pb, Mg, and Mn) of soil sample collected from the polluted site were analyzed and found that the most of the metal contents were beyond the acceptable limits of national standards. The metals such as Mn (1859.37 ± 11.25 mg kg-1), Cd (24.86 ± 1.85 mg kg-1), Zn (795.64 ± 9.24 mg kg-1), Pb (318.62 ± 5.85 mg kg-1), Cr (186.84 ± 6.84 mg kg-1), and Al (105.84 ± 5.42 mg kg-1) were crossing the permissible limits. The pre-isolated L. ferrooxidans showed considerable metal tolerance to metals such as Al, Cd, Cr, Pb, Mg, and Mn at up to the concentration of 750 µg mL-1 and also have remediation potential on polluted soil in a short duration of treatment. The greenhouse study demonstrated that the bio/phytoremediation potential of metal tolerant L. ferrooxidans and R. communis under various remediation (A, B, and C) groups. Surprisingly, remediation group C demonstrated greater phytoextraction potential than the other remediation groups (A and B). These results strongly suggest that coexistence of L. ferrooxidans and R. communis had a significant positive effect on phytoextraction on metal-contaminated soil.

Environmental effects and interaction of nanoparticles on beneficial soil and aquatic microorganisms.

A steadily increasing production volume of nanoparticles reflects their numerous industrial and domestic applications. These economic successes come with the potential adverse effects on natural systems that are associated with their presence in the environment. Biological activities and effects of nanoparticles are affected by their entry method together with their specificities like their size, shape, charge, area, and chemical composition. Particles can be classified as safe or dangerous depending on their specific properties. As both aquatic and terrestrial systems suffer from organic and inorganic contamination, nanoparticles remain a sink for these contaminants. Researching the sources, synthesis, fate, and toxicity of nanoparticles has advanced significantly during the last ten years. We summarise nanoparticle pathways throughout the ecosystem and their interactions with beneficial microorganisms in this research. The prevalence of nanoparticles in the ecosystem causes beneficial microorganisms to become hazardous to their cells, which prevents the synthesis of bioactive molecules from undergoing molecular modifications and diminishes the microbe population. Recently, observed concentrations in the field could support predictions of ambient concentrations based on modeling methodologies. The aim is to illustrate the beneficial and negative effects that nanoparticles have on aqueous and terrestrial ecosystems, as well as the methods utilized to reduce their toxicity.

Water a major source of endocrine-disrupting chemicals: An overview on the occurrence, implications on human health and bioremediation strategies.

Endocrine disrupting chemicals (EDCs) are toxic compounds that occur naturally or are the output of anthropogenic activities that negatively impact both humans and wildlife. A number of diseases are associated with these disruptors, including reproductive disorders, cardiovascular disorders, kidney disease, neurological disorders, autoimmune disorders, and cancer. Due to their integral role in pharmaceuticals and cosmetics, packaging companies, agro-industries, pesticides, and plasticizers, the scientific awareness on natural and artificial EDCs are increasing. As these xenobiotic compounds tend to bioaccumulate in body tissues and may also persist longer in the environment, the concentrations of these organic compounds may increase far from their original point of concentrations. Water remains as the major sources of how humans and animals are exposed to EDCs. However, these toxic compounds cannot be completely biodegraded nor bioremediated from the aqueous medium with conventional treatment strategies thereby requiring much more efficient strategies to combat EDC contamination. Recently, genetically engineered microorganism, genome editing, and the knowledge of protein and metabolic engineering has revolutionized the field of bioremediation thereby helping to breakdown EDCs effectively. This review shed lights on understanding the importance of aquatic mediums as a source of EDCs exposure. Furthermore, the review sheds light on the consequences of these EDCs on human health as well as highlights the importance of different remediation and bioremediation approaches. Particular attention is paid to the recent trends and perspectives in order to attain sustainable approaches to the bioremediation of EDCs. Additionally, rigorous restrictions to preclude the discharge of estrogenic chemicals into the environment should be followed in efforts to combat EDC pollution.

Antioxidant and anticancer potential of ethyl acetate extract of bark and flower of Tecoma stans (Linn) and In Silico studies on phytoligands against Bcl 2 and VEGFR2 factors.

This study was designed to appraise the antioxidant and anticancer competence of solvent extracts of Tecoma stans (Linn) and analyze the phytoligands interaction against Bcl 2 VEGFR2 through in silico studies. The phytochemical analysis revealed that the ethyl acetate extract contains more number of pharmaceutically valuable phytochemicals than other solvent extracts. Among the various phytochemicals, flavonoid was found as a predominant component, and UV-Vis- spectrophotometer analysis initially confirmed it. Hence, the column chromatogram was performed to purify the flavonoid, and High-performance liquid chromatography (HPLC) was performed. It revealed that the flavonoid enriched fraction by compared with standard flavonoid molecules. About 84.69% and 80.43% of antioxidant activity were found from ethyl acetate extract of bark and flower at the dosage of 80 µg mL-1 with the IC50 value of 47.24 and 43.40 µg mL-1, respectively. In a dose-dependent mode, the ethyl acetate extract of bark and flower showed cytotoxicity against breast cancer cell line MCF 7 (Michigan Cancer Foundation-7) as up to 81.38% and 80.94% of cytotoxicity respectively. Furthermore, the IC50 was found as 208.507 µg mL-1 and 207.38 µg mL-1 for bark and flower extract correspondingly. About 10 medicinal valued flavonoid components were identified from bark (6) and flower (4) ethyl acetate extract through LC-MS analysis. Out of 10 components, the 3,5-O-dicaffeoylquinic acid (ΔG -8.8) and Isorhamnetin-3-O-rutinoside (ΔG -8.3) had the competence to interact with Bcl 2 (B-Cell Lymphoma 2) and VEGFR2 (Vascular Endothelial Growth Factor Receptor 2) respectively with more energy. Hence, these results confirm that the ethyl acetate extract of bark and flower of T. stans has significant medicinal potential and could be used as antioxidant and anticancer agent after some animal performance study.