Novel two-step vapor-phase synthesis of UV-Vis light active Fe2O3/WO3 nanocomposites for phenol degradation.

Supported Fe2O3/WO3 nanocomposites were fabricated by an original vapor phase approach, involving the chemical vapor deposition (CVD) of Fe2O3 on Ti sheets and the subsequent radio frequency (RF)-sputtering of WO3. Particular attention was dedicated to the control of the W/Fe ratio, in order to tailor the composition of the resulting materials. The target systems were analyzed by the joint use of complementary techniques, that is, X-ray diffraction (XRD), field emission-scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), energy dispersive X-ray spectroscopy (EDXS), X-ray photoelectron spectroscopy (XPS), secondary ion mass spectrometry (SIMS), and optical absorption spectroscopy. The results showed the uniform decoration of α-Fe2O3 (hematite) globular particles by tiny WO3 aggregates, whose content could be controlled by modulations of the sole sputtering time. The photocatalytic degradation of phenol in the liquid phase was selected as a test reaction for a preliminary investigation of the system behavior in wastewater treatment applications. The system activity under both UV and Vis light illumination may open doors for further material optimization in view of real-world end-uses.

Structural and Mechanical Characterization of Sustainable Composites Based on Recycled and Stabilized Fly Ash.

This paper reports the results on the use of an innovative inert, based on stabilized fly ash from municipal solid waste incineration as a filler for polypropylene. The starting material, which contains large quantities of leachable Pb and Zn, was stabilized by means of an innovative process using rice husk ash as a waste silica source, together with other fly ashes, such as coal fly ash and flue gas desulfurization residues. The use of all waste materials to obtain a new filler makes the proposed technology extremely sustainable and competitive. The new composites, obtained by using the stabilized material as a filler for polypropylene, were characterized and their mechanical properties were also investigated. A comparison with a traditional polypropylene and calcium carbonate based compound was also done. This research activity was realized in the frame of the COSMOS-RICE project, financed by the EU Commission.

Vertically aligned TiO2 nanotubes on plastic substrates for flexible solar cells.

Electrochemical anodization of a titanium film on a Kapton HN substrate leads to the formation of closely packed aligned nanotubes, whose shape can be finely tuned by tailoring the anodization parameters. An amorphous-to-anatase phase transition is induced on nanotubes by annealing at 350 °C. The nanotubes are applied as photoanodes in flexible dye-sensitized solar cells (N719 dye; I3-/I- redox couple), resulting in a photoconversion efficiency of up to 3.5% under simulated sunlight irradiation air mass 1.5 global (AM 1.5G).