Bisphenol S is present in culture media used for ART and cell culture.

STUDY QUESTION: Do plastic laboratory consumables and cell culture media used in ART contain bisphenols? SUMMARY ANSWER: The majority of human embryo culture media assessed contained bisphenol S close to the nanomolar concentration range, while no release of bisphenols by plastic consumables was detected under routine conditions. WHAT IS KNOWN ALREADY: The deleterious effect of the endocrine disruptor bisphenol A (BPA) on female fertility raised concerns regarding ART outcome. BPA was detected neither in media nor in the majority of plastic consumables used in ART; however, it might have already been replaced by its structural analogs, including bisphenol S (BPS). STUDY DESIGN, SIZE, DURATION: Seventeen plastic consumables and 18 cell culture and ART media were assessed for the presence of bisphenols. PARTICIPANTS/MATERIALS, SETTING, METHODS: Ten different bisphenols (bisphenol A, S, AF, AP, B, C, E, F, P and Z) were measured using an isotopic dilution according to an on-line solid phase extraction/liquid chromatography/mass spectrometry method. MAIN RESULTS AND THE ROLE OF CHANCE: While the plastic consumables did not release bisphenols under routine conditions, 16 of the 18 cell culture and ART media assessed contained BPS. Six media exhibited BPS concentrations higher than 1 nM and reached up to 6.7 nM (1693 ng/l). LARGE SCALE DATA: N/A. LIMITATIONS, REASONS FOR CAUTION: Further studies are required to investigate a greater number of ART media to identify less potentially harmful ones, in terms of bisphenol content. WIDER IMPLICATIONS OF THE FINDINGS: As BPS has already been reported to impair oocyte quality at nanomolar concentrations, its presence in ART media, at a similar concentration range, could contribute to a decrease in the ART success rate. Thus far, there has been no regulation of these compounds in the ART context. STUDY FUNDING/COMPETING INTERESTS: This study was financially supported by the 'Centre-Val de Loire' Region (Bemol project, APR IR 2017), INRAE, BRGM, the French National Research Agency (project ANR-18-CE34-0011-01 MAMBO) and the BioMedicine Agency (Project 18AMP006 FertiPhenol). The authors declare that they have no conflict of interest that could be perceived as prejudicing the impartiality of the reported research.

Validation of chlordecone analysis for native and remediated French West Indies soils with high organic matter content.

An analytic method was developed and validated for the analysis of chlordecone in the three main types of French West Indies soils: Ferralsol, Andosol and Nitisol with and without the addition of Daramend® and compost amendment used in a remediation process. The method consists in analysis by gas chromatography coupled with triple quadrupole mass spectrometry after pressurised liquid extraction. The high natural content of organic matter in the soils coupled with the additional exogenous organic matter from the amendments tested lead to a complex extract. Trans-nonachlor was used as surrogate to correct the results for extraction efficiency, and (13)C chlordecone was added as internal standard to mimic as closely as possible the behaviour of chlordecone and suppress possible side effects during its analysis. The key parameters of the method (linearity, repeatability, interday precision, specificity, extraction efficiency and limit of quantification) were validated in accordance with the NF T 90-210 standard method. The limit of quantification is 0.03 mg/kg. Uncertainty (k = 2) was 40 % for concentrations lower than or equal to 1 mg/kg, and 30 % for concentrations greater than 1 mg/kg.

The unexpected sources of organotin contamination in aquatic toxicological laboratory studies.

Unaccounted sources of contamination can be problematic in toxicological studies and can range from the presence of impurities, breakdown products or isoforms of the parent compound to the unexpected compounds leaching from dosing apparatus. As these compounds are not being tested, they may not be measured in the dosed aquaria and hence go undetected, potentially contributing as confounding factors in toxicological assessments. In this paper we report the unexpected detection of butyltin compounds (mono, di and tributyltin) in flow-through aquaria waters of an aquatic toxicological set-up. High and variable leaching rates for dibutyltin of 2.0 and 6.6 microg/h were detected during the first week of each of two separate flow-through studies. Following this initial 'surge' of dibutyltin leachate, a decrease in leachate rate was seen with values of 0.9 and 1.2 microg/h by Day 14 (second week of study). The main source of the butyltin leachates was shown, to be the airline tubing used in the assembly of the air-supply into each flow-through tank. A 24h period of incubation of the airline tubing with clean water led to the leaching of concentrations of 63.8 ng/l TBT-Sn, 1638.8 ng/l DBT-Sn and 4054.6 ng/l MBT-Sn. The concentration of tributyltin detected was within its toxicologically effective range and as such could have potentially confounding effects on the toxicological bioassays being used. These accidental findings could be of enormous relevance to aquatic toxicologists and have an important bearing on the choice of materials used to construct experimental exposure aquaria.

Molecularly imprinted polymer applied to the determination of the residual mass of atrazine and metabolites within an agricultural catchment (Brévilles, France).

Atrazine, desethyl-atrazine and desisopropyl-atrazine have been measured in the soils of Brévilles watershed. Pressurised liquid extraction (PLE) technique was used for extraction followed by purification with terbutylazine molecularly imprinted polymers. This clean-up procedure allowed to remove interfering compounds from the sample extracts. Thus making easier the analyses by reversed phase liquid chromatography coupled with ion trap tandem mass spectrometry. This selective sample treatment for soil extracts allowed limit of quantification (LOQ) of 0.03 ng/g for atrazine and 0.05 ng/g for metabolites. The concentrations in soil samples ranged from 7.1 ng/g to < LOQ for atrazine and from 2.5 ng/g to < LOQ for metabolites. The total cumulated mass in the top 60 cm of the soil of the watershed was estimated at 1.4, 0.52 and 0.25 kg for atrazine, desethyl-atrazine and desisopropyl-atrazine, respectively. A fraction of this mass available for leaching could generate water infiltrating with concentrations higher than the drinking water limit, 7 years after the last application of atrazine.

A multispecies approach for monitoring persistent toxic substances in the Gulf of Gdansk (Baltic sea).

Bivalve mussels are usually used for biomonitoring persistent toxic substances (PTS) in coastal ecosystems. Nevertheless, these organisms, which live attached on hard substrates, can be found along the sandy coasts only on human manufactured products. In this work different species collected in the Gulf of Gdansk were compared to evaluate their suitability for monitoring PTS pollution at a local scale. The clam Mya arenaria seems to represent an excellent indicator of sediment pollution, mainly for organotin compounds which are selectively bioaccumulated. Organochlorine compounds are bioaccumulated in the different species mainly in function of their lipid body burden. Habitat conditions (salinity, substrate, pollution), however, strongly limited the occurrence of different species in the sampling sites; the most ubiquitous species, the common shrimp Crangon crangon, resulted therefore the most suitable to be used for the comparison of PTS pollution in this aquatic environment. Although the blue mussel (Mytilus trossulus) was confirmed to be a very useful sentinel species to compare pollution level inside and outside the Gulf of Gdansk, we recommend the use of other species to give a more detailed picture of the pollution situation in coastal areas.

Some chemical contaminant of surface sediments at the Baltic Sea coastal region with special emphasis on androgenic and anti-androgenic compounds.

Androgenic and anti-androgenic compounds including p,p'-DDE, Diuron, Linuron, Fenarimol, Vinclozolin, 1-(3,4-dichlorophenyl) urea (DCPU), 1-(3,4-dichlorophenyl)-3-methylurea, (DCPMU), tributyltin (TBT) and triphenyltin (TPT) and their metabolites (DBT, MBT, DPT, MPT) as well as metallic elements (Ni, Cu, Zn, As, Cd, Pb, Co, Tl, Cr, Fe, Mn, Al, K, Mg, Na, Ca, Ba, Ti, Sn), PAHs (16 indicator compounds), DDTs and PCBs have been quantified in top layer (0-10 cm) of up to 37 surface sediment samples collected from several sites in costal zone of the Gulf of Gdansk, an inland freshwater area of Brdyujscie in Poland and the tidal flats of the Norderney Island, Wadden Sea in 2002-2003. These sites differed in the degree of anthropogenic activities, including chemical pollution and related impact on biota. Especially in sediments near shipyards, ship repair facilities, harbours, other industrial activities or close to municipal sewage treatment plant outlets butyltins, PAHs and some metallic elements were found at high concentrations. Diuron, Linuron and DCPMU were detected at a few sites, Fenarimol only once, while Vinclozolin and DCPU were not detected. DDT concentrations in the sediments from the Gdansk and Gdynia region of the Gulf show a stepwise decrease following the ban for production and use, while diffusion of PCBs at some industrial sites seems to continue. Elevated PAH concentrations in sediments seem to be mainly due to pyrogenic and less to mixed pyrogenic and petrogenic sources, while for a few sites rather petrogenic sources dominated. The reference sites in the Norderney Island, Wadden Sea showed similar or slightly higher loads of DDTs, BTs, PAHs, PCBs and metallic elements when compared to sediments from the least contaminated sites in the coastal Gulf of Gdansk area, while phenyltins were not detected at both spatially distant European areas.

Determination of chloroacetanilides, triazines and phenylureas and some of their metabolites in soils by pressurised liquid extraction, GC-MS/MS, LC-MS and LC-MS/MS.

Pressurised liquid extraction (PLE) technique was used for the simultaneous extraction of phenylureas, triazines and chloroacetanilides and some of their metabolites from soils. Extractions were performed by mixing 15 g of dried soil with 30 mL of acetone under 100 atm at 50 degrees C, during 3 min and with three PLE cycles. Prior to the analysis of naturally contaminated soils, each of the five representative soil matrices used as blanks (of different depths) was spiked in triplicate with standards of each parent and degradation compound at about 10, 30 and 120 microg/kg. For each experiment, isoproturon-D6 and atrazine-D5 were used as surrogates. Analysis of phenylureas and metabolites of triazines and phenylureas was carried out by reversed phase liquid chromatography/mass spectrometry (LC-MS) and LC-MS/MS in the positive mode. Gas chromatography (GC)/ion trap mass spectrometry was used in the MS/MS mode for the parent triazines and chloroacetanilides. The average extraction recoveries were above 85%, except for didesmethyl-isoproturon, and quantification limits were between 0.5 and 5 microg/kg. The optimised multi-residue method was applied to soils and solids below the root zone, sampled from agricultural plots of a small French hydrogeological basin.