Stacking Fault-Enriched MoNi4/MoO2 Enables High-Performance Hydrogen Evolution.

Producing green hydrogen in a cost-competitive manner via water electrolysis will make the long-held dream of hydrogen economy a reality. Although platinum (Pt)-based catalysts show good performance toward hydrogen evolution reaction (HER), the high cost and scarce abundance challenge their economic viability and sustainability. Here, a non-Pt, high-performance electrocatalyst for HER achieved by engineering high fractions of stacking fault (SF) defects for MoNi4/MoO2 nanosheets (d-MoNi) through a combined chemical and thermal reduction strategy is shown. The d-MoNi catalyst offers ultralow overpotentials of 78 and 121 mV for HER at current densities of 500 and 1000 mA cm-2 in 1 M KOH, respectively. The defect-rich d-MoNi exhibits four times higher turnover frequency than the benchmark 20% Pt/C, together with its excellent durability (> 100 h), making it one of the best-performing non-Pt catalysts for HER. The experimental and theoretical results reveal that the abundant SFs in d-MoNi induce a compressive strain, decreasing the proton adsorption energy and promoting the associated combination of *H into hydrogen and molecular hydrogen desorption, enhancing the HER performance. This work provides a new synthetic route to engineer defective metal and metal alloy electrocatalysts for emerging electrochemical energy conversion and storage applications.

Intermediates during the Nucleation of Platinum Nanoparticles by a Reaction with Ethylene Glycol: Operando X-ray Absorption Spectroscopy Studies with a Microfluidic Cell.

Using operando X-ray absorption spectroscopy in a continuous-flow microfluidic cell, we have investigated the nucleation of platinum nanoparticles from aqueous hexachloroplatinate solution in the presence of the reducing agent ethylene glycol. By adjusting flow rates in the microfluidic channel, we resolved the temporal evolution of the reaction system in the first few seconds, generating the time profiles for speciation, ligand exchange, and reduction of Pt. Detailed analysis of the X-ray absorption near-edge structure and extended X-ray absorption fine structure spectra with multivariate data analysis shows that at least two reaction intermediates are involved in the transformation of the precursor H2PtCl6 to metallic platinum nanoparticles, including the formation of clusters with Pt-Pt bonding before complete reduction to Pt nanoparticles.

Insights into the electric double-layer capacitance of two-dimensional electrically conductive metal-organic frameworks.

Two-dimensional electrically conductive metal-organic frameworks (MOFs) have emerged as promising model electrodes for use in electric double-layer capacitors (EDLCs). However, a number of fundamental questions about the behaviour of this class of materials in EDLCs remain unanswered, including the effect of the identity of the metal node and organic linker molecule on capacitive performance, and the limitations of current conductive MOFs in these devices relative to traditional activated carbon electrode materials. Herein, we address both these questions via a detailed study of the capacitive performance of the framework Cu3(HHTP)2 (HHTP = 2,3,6,7,10,11-hexahydroxytriphenylene) with an acetonitrile-based electrolyte, finding a specific capacitance of 110-114 F g-1 at current densities of 0.04-0.05 A g-1 and a modest rate capability. By directly comparing its performance with the previously reported analogue, Ni3(HITP)2 (HITP = 2,3,6,7,10,11-hexaiminotriphenylene), we illustrate that capacitive performance is largely independent of the identity of the metal node and organic linker molecule in these nearly isostructural MOFs. Importantly, this result suggests that EDLC performance in general is uniquely defined by the 3D structure of the electrodes and the electrolyte, a significant finding not demonstrated using traditional electrode materials. Finally, we probe the limitations of Cu3(HHTP)2 in EDLCs, finding a limited stable double-layer voltage window of 1 V and only a modest capacitance retention of 81% over 30 000 cycles, both significantly lower than state-of-the-art porous carbons. These important insights will aid the design of future conductive MOFs with greater EDLC performances.

Exploring Cation-Anion Redox Processes in One-Dimensional Linear Chain Vanadium Tetrasulfide Rechargeable Magnesium Ion Cathodes.

For magnesium ion batteries (MIBs) to be used commercially, new cathodes must be developed that show stable reversible Mg intercalation. VS4 is one such promising material, with vanadium and disulfide anions [S2]2- forming one-dimensional linear chains, with a large interchain spacing (5.83 Å) enabling reversible Mg insertion. However, little is known about the details of the redox processes and structural transformations that occur upon Mg intercalation and deintercalation. Here, employing a suite of local structure characterization methods including X-ray photoelectron spectroscopy (XPS), V and S X-ray absorption near-edge spectroscopy (XANES), and 51V Hahn echo and magic-angle turning with phase-adjusted sideband separation (MATPASS) NMR, we show that the reaction proceeds via internal electron transfer from V4+ to [S2]2-, resulting in the simultaneous and coupled oxidation of V4+ to V5+ and reduction of [S2]2- to S2-. We report the formation of a previously unknown intermediate in the Mg-V-S compositional space, Mg3V2S8, comprising [VS4]3- tetrahedral units, identified by using density functional theory coupled with an evolutionary structure-predicting algorithm. The structure is verified experimentally via X-ray pair distribution function analysis. The voltage associated with the competing conversion reaction to form MgS plus V metal directly is similar to that of intermediate formation, resulting in two competing reaction pathways. Partial reversibility is seen to re-form the V5+ and S2- containing intermediate on charging instead of VS4. This work showcases the possibility of developing a family of transition metal polychalcogenides functioning via coupled cationic-anionic redox processes as a potential way of achieving higher capacities for MIBs.

Natural abundance solid-state 33S NMR study of NbS3: applications for battery conversion electrodes.

We report ultra-wideline, high-field natural abundance solid-state 33S NMR spectra of the Li-ion battery conversion electrode NbS3, the first 33S NMR study of a compound containing disulfide (S22-) units. The large quadrupolar coupling parameters (CQ ≈ 31 MHz) are consistent with values obtained from DFT calculations, and the spectra provide evidence for the linear Peierls distortion that doubles the number of 33S sites.

Layered CeSO and LiCeSO Oxide Chalcogenides Obtained via Topotactic Oxidative and Reductive Transformations.

The chemical accessibility of the CeIV oxidation state enables redox chemistry to be performed on the naturally coinage-metal-deficient phases CeM1- xSO (M = Cu, Ag). A metastable black compound with the PbFCl structure type (space group P4/ nmm: a = 3.8396(1) Å, c = 6.607(4) Å, V = 97.40(6) Å3) and a composition approaching CeSO is obtained by deintercalation of Ag from CeAg0.8SO. High-resolution transmission electron microscopy reveals the presence of large defect-free regions in CeSO, but stacking faults are also evident which can be incorporated into a quantitative model to account for the severe peak anisotropy evident in all the high-resolution X-ray and neutron diffractograms of bulk CeSO samples; these suggest that a few percent of residual Ag remains. A straw-colored compound with the filled PbFCl (i.e., ZrSiCuAs- or HfCuSi2-type) structure (space group P4/ nmm: a = 3.98171(1) Å, c = 8.70913(5) Å, V = 138.075(1) Å3) and a composition close to LiCeSO, but with small amounts of residual Ag, is obtained by direct reductive lithiation of CeAg0.8SO or by insertion of Li into CeSO using chemical or electrochemical means. Computation of the band structure of pure, stoichiometric CeSO predicts it to be a Ce4+ compound with the 4f-states lying approximately 1 eV above the sulfide-dominated valence band maximum. Accordingly, the effective magnetic moment per Ce ion measured in the CeSO samples is much reduced from the value found for the Ce3+-containing LiCeSO, and the residual paramagnetism corresponds to the Ce3+ ions remaining due to the presence of residual Ag, which presumably reflects the difficulty of stabilizing Ce4+ in the presence of sulfide (S2-). Comparison of the behavior of CeCu0.8SO with that of CeAg0.8SO reveals much slower reaction kinetics associated with the Cu1- xS layers, and this enables intermediate CeCu1- xLi xSO phases to be isolated.

Enabling multi-electron reaction of ε-VOPO4 to reach theoretical capacity for lithium-ion batteries.

By controlling the morphology and particle size of the epsilon polymorph of vanadyl phosphate, ε-VOPO4, it can fully reversibly intercalate two Li-ions and reach the theoretical capacity of 305 mA h g-1 over two voltage plateaus at about 4.0 and 2.5 V.

Electrochemical Performance of Nanosized Disordered LiVOPO4.

ε-LiVOPO4 is a promising multielectron cathode material for Li-ion batteries that can accommodate two electrons per vanadium, leading to higher energy densities. However, poor electronic conductivity and low lithium ion diffusivity currently result in low rate capability and poor cycle life. To enhance the electrochemical performance of ε-LiVOPO4, in this work, we optimized its solid-state synthesis route using in situ synchrotron X-ray diffraction and applied a combination of high-energy ball-milling with electronically and ionically conductive coatings aiming to improve bulk and surface Li diffusion. We show that high-energy ball-milling, while reducing the particle size also introduces structural disorder, as evidenced by 7Li and 31P NMR and X-ray absorption spectroscopy. We also show that a combination of electronically and ionically conductive coatings helps to utilize close to theoretical capacity for ε-LiVOPO4 at C/50 (1 C = 153 mA h g-1) and to enhance rate performance and capacity retention. The optimized ε-LiVOPO4/Li3VO4/acetylene black composite yields the high cycling capacity of 250 mA h g-1 at C/5 for over 70 cycles.

Multiple Redox Modes in the Reversible Lithiation of High-Capacity, Peierls-Distorted Vanadium Sulfide.

Vanadium sulfide VS4 in the patronite mineral structure is a linear chain compound comprising vanadium atoms coordinated by disulfide anions [S2](2-). (51)V NMR shows that the material, despite having V formally in the d(1) configuration, is diamagnetic, suggesting potential dimerization through metal-metal bonding associated with a Peierls distortion of the linear chains. This is supported by density functional calculations, and is also consistent with the observed alternation in V-V distances of 2.8 and 3.2 Å along the chains. Partial lithiation results in reduction of the disulfide ions to sulfide S(2-), via an internal redox process whereby an electron from V(4+) is transferred to [S2](2-) resulting in oxidation of V(4+) to V(5+) and reduction of the [S2](2-) to S(2-) to form Li3VS4 containing tetrahedral [VS4](3-) anions. On further lithiation this is followed by reduction of the V(5+) in Li3VS4 to form Li3+xVS4 (x = 0.5-1), a mixed valent V(4+)/V(5+) compound. Eventually reduction to Li2S plus elemental V occurs. Despite the complex redox processes involving both the cation and the anion occurring in this material, the system is found to be partially reversible between 0 and 3 V. The unusual redox processes in this system are elucidated using a suite of short-range characterization tools including (51)V nuclear magnetic resonance spectroscopy (NMR), S K-edge X-ray absorption near edge spectroscopy (XANES), and pair distribution function (PDF) analysis of X-ray data.

Ab initio structure search and in situ 7Li NMR studies of discharge products in the Li-S battery system.

The high theoretical gravimetric capacity of the Li-S battery system makes it an attractive candidate for numerous energy storage applications. In practice, cell performance is plagued by low practical capacity and poor cycling. In an effort to explore the mechanism of the discharge with the goal of better understanding performance, we examine the Li-S phase diagram using computational techniques and complement this with an in situ (7)Li NMR study of the cell during discharge. Both the computational and experimental studies are consistent with the suggestion that the only solid product formed in the cell is Li2S, formed soon after cell discharge is initiated. In situ NMR spectroscopy also allows the direct observation of soluble Li(+)-species during cell discharge; species that are known to be highly detrimental to capacity retention. We suggest that during the first discharge plateau, S is reduced to soluble polysulfide species concurrently with the formation of a solid component (Li2S) which forms near the beginning of the first plateau, in the cell configuration studied here. The NMR data suggest that the second plateau is defined by the reduction of the residual soluble species to solid product (Li2S). A ternary diagram is presented to rationalize the phases observed with NMR during the discharge pathway and provide thermodynamic underpinnings for the shape of the discharge profile as a function of cell composition.

Polytypism in the lithium-aluminum layered double hydroxides: the [LiAl2(OH)6]+ layer as a structural synthon.

The [LiAl(2)(OH)(6)](+) layer obtained from gibbsite-Al(OH)(3) belongs to the layer group symmetry P-312/m. This layer satisfies the defining characteristics of a synthon in that it predicts all the polymorphic modifications of the layered double hydroxides of Li and Al. The various possible ways of stacking these layers can be derived by the systematic elimination of the principal symmetry elements comprising the layer group. This approach yields the complete universe of possible structures. When the 3 axis of the layer is conserved in the stacking, the resultant crystal adopts the structure of the 1H, 2H, or 3R polytypes (H, hexagonal; R, rhombohedral). When the 3 axis is destroyed and the 2/m axis is retained, the crystal adopts monoclinic symmetry and crystallizes in the structures of the 1M(1) or 1M(2) (M, monoclinic) polytypes; the two polytypes differ only in their translational component. Experimentally, gibbsite-based precursors yield the 2H polytype, and bayerite-based precursors yield the 1M polytype. Faulted structures incorporating differently oriented 1M(1) motifs or a mixture of 1M(1) and 1M(2) motifs are also obtained. These stacking faults result in cation disorder along the c axis and produce signature effects on the line shapes of select reflections in the powder X-ray diffraction patterns. This symmetry-guided approach is general and can be extended to other classes of layered solids.

Polytypism, disorder, and anion exchange properties of divalent ion (Zn, Co) containing bayerite-derived layered double hydroxides.

Incorporation of Zn(2+) into bayerite results in the formation of a cation-ordered layered double hydroxide (LDH) of monoclinic symmetry in which about half the vacancies of Al(OH)(3) are occupied by Zn(2+) giving rise to positively charged layers. Charge compensation takes place by the incorporation of sulfate ions in the interlayer region. Structure refinement reveals that the adjacent layers in the crystal are related by a 2(1) axis (we call it 2M(1) polytype) with sulfate coordinating in the D(2d) symmetry in the interlayer region. Another polytype in which adjacent layers are related by a 2-fold axis (2M(2) polytype) can also be envisaged. Faulted crystals arising from intergrowths of the 2M(2) polytype within the 2M(1) structure were also obtained. These bayerite-based LDHs have a distinctly different interlayer chemistry when compared to the better known brucite-based LDHs, in that they have a strong affinity for tetrahedral ions such as SO(4)(2-), CrO(4)(2-), and MoO(4)(2-) and a poor affinity for CO(3)(2-) ions. These observations have implications for the use of LDHs in applications related to chromate sorption.

Structure of bayerite-based lithium-aluminum layered double hydroxides (LDHs): observation of monoclinic symmetry.

The double hydroxides of Li with Al, obtained by the imbibition of Li salts into bayerite and gibbsite-Al(OH)(3), are not different polytypes of the same symmetry but actually crystallize in two different symmetries. The bayerite-derived double hydroxides crystallize with monoclinic symmetry, while the gibbsite-derived hydroxides crystallize with hexagonal symmetry. Successive metal hydroxide layers in the bayerite-derived LDHs are translated by the vector ( approximately -1/3, 0, 1) with respect to each other. The exigency of hydrogen bonding drives the intercalated Cl(-) ion to a site with 2-fold coordination, whereas the intercalated water occupies a site with 6-fold coordination having a pseudotrigonal prismatic symmetry. The nonideal nature of the interlayer sites has implications for the observed selectivity of Li-Al LDHs toward anions of different symmetries.

Solution decomposition of the layered double hydroxide of Co with Fe: phase segregation of normal and inverse spinels.

The nitrate-intercalated layered double hydroxide of Co with Fe decomposes on hydrothermal treatment to yield an oxide residue at a temperature as low as 180 degrees C. The oxide product is phase segregated into a Co(3)O(4)-type normal spinel and a CoFe(2)O(4)-type inverse spinel. Phase segregation is facilitated as decomposition in a solution medium takes place by dissolution of the precursor hydroxide followed by reprecipitation of the oxide phases. In contrast, thermal decomposition takes place at 400 degrees C. This temperature is inadequate to induce diffusion in the solid state whereby phase segregation into the thermodynamically stable individual spinels is suppressed. The result is a single-phase metastable mixed spinel oxide. This is rather uncommon in that a hydrothermal treatment yields thermodynamically stable products where as thermal decomposition yields a metastable product.