Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 3 de 3
Filter
Add more filters










Database
Language
Publication year range
1.
Mil Med ; 181(5 Suppl): 156-9, 2016 05.
Article in English | MEDLINE | ID: mdl-27168567

ABSTRACT

In the current theater of operation, medical devices are often shipped and stored at ambient conditions. The effect of storage at hot and cold temperature extremes on ventilator performance is unknown. We evaluated three portable ventilators currently in use or being evaluated for use by the Department of Defense (731, Impact Instrumentation; T1, Hamilton Medical; and Revel, CareFusion) at temperature extremes in a laboratory setting. The ventilators were stored at temperatures of 60°C and -35°C for 24 hours and were allowed to acclimate to room temperature for 30 minutes before evaluation. The T1 required an extra 15 to 30 minutes of acclimation to room temperature before the ventilator would deliver breaths. All delivered tidal volumes at room temperature and after storage at temperature extremes were less than the ±10% American Society for Testing and Materials standard with the Revel. Delivered tidal volumes at the pediatric settings were less than the ±10% threshold after storage at both temperatures and at room temperature with the 731. Storage at extreme temperature affected the performance of the portable ventilators tested. This study showed that portable ventilators may need an hour or more of acclimation time at room temperature after storage at temperature extremes to operate as intended.


Subject(s)
Cold Temperature/adverse effects , Equipment Design/standards , Hot Temperature/adverse effects , Tidal Volume , Ventilators, Mechanical/standards , Aerospace Medicine , Equipment Design/statistics & numerical data , Equipment Failure/statistics & numerical data , Humans , Ventilators, Mechanical/statistics & numerical data
2.
Mil Med ; 181(5 Suppl): 160-8, 2016 05.
Article in English | MEDLINE | ID: mdl-27168568

ABSTRACT

Oxygen cylinders are heavy and present a number of hazards, and liquid oxygen is too heavy and cumbersome to be used in far forward environments. Portable oxygen concentrators (POCs) and chemical oxygen generators (COGs) have been proposed as a solution. We evaluated 3 commercially available POCs and 3 COGs in a laboratory setting. Altitude testing was done at sea level and 8,000, 16,000, and 22,000 ft. Temperature extreme testing was performed after storing devices at 60°C and -35°C for 24 hours. Mean FIO2 decreased after storage at -35°C with Eclipse and iGo POCs and also at the higher volumes after storage at 60°C with the Eclipse. The iGo ceased to operate at 16,000 ft, but the Eclipse and Saros were unaffected by altitude. Oxygen flow, duration of operation, and total oxygen volume varied between COGs and within the same device type. Output decreased after storage at -35°C, but increased at each altitude as compared to sea level. This study showed significant differences in the performance of POCs and COGs after storage at temperature extremes and with the COGs at altitude. Clinicians must understand the performance characteristics of devices in all potential environments.


Subject(s)
Altitude , Equipment Design/statistics & numerical data , Oxygen Inhalation Therapy/instrumentation , Oxygen Inhalation Therapy/methods , Temperature , Aerospace Medicine , Attention , Chemical Phenomena , Cold Temperature/adverse effects , Equipment Design/methods , Hot Temperature/adverse effects , Humans
3.
Respir Care ; 57(11): 1865-72, 2012 Nov.
Article in English | MEDLINE | ID: mdl-22613503

ABSTRACT

BACKGROUND: High-frequency oscillatory ventilation (HFOV) has been utilized as a rescue oxygenation therapy in adults with ARDS over the last decade. The HFOV oscillating piston can generate negative pressure during the exhalation cycle, which has been termed active exhalation. We hypothesized that this characteristic of HFOV entrains CO(2) into the inspiratory limb of the circuit and increases the total dead space. The purpose of this study was to determine if retrograde CO(2) entrainment occurs and how it is altered by HFOV parameter settings. METHODS: An HFOV was interfaced to a cuffed endotracheal tube and connected to a mechanical test lung. Negative pressure changes within the circuit's inspiratory limb were measured while HFOV settings were manipulated. Retrograde CO(2) entrainment was evaluated by insufflating CO(2) into the test lung to achieve 40 mm Hg at the carina. Inspiratory limb CO(2) entrainment was measured at incremental distances from the Y-piece. HFOV settings and cuff leak were varied to assess their effect on CO(2) entrainment. Control experiments were conducted using a conventional ventilator. Test lung results were validated on a large hypercapnic swine. RESULTS: Negative pressure was detectable within the inspiratory limb of the HFOV circuit and varied inversely with mean airway pressure (P(-)(aw)) and directly with oscillatory pressure amplitude (ΔP). CO(2) was readily detectable within the inspiratory limb and was proportional to the negative pressure that was generated. Factors that decreased CO(2) entrainment in both the test lung and swine included low ΔP, high mean airway pressure, high oscillatory frequency (Hz), high bias flow, and endotracheal tube cuff leak placement. CO(2) entrainment was also reduced by utilizing a higher bias flow strategy at any targeted mean airway pressure. CONCLUSIONS: Retrograde CO(2) entrainment occurs during HFOV use and can be manipulated with the ventilator settings. This phenomenon may have clinical implications on the development or persistence of hypercapnia.


Subject(s)
High-Frequency Ventilation/methods , Respiratory Distress Syndrome/therapy , Animals , Carbon Dioxide/metabolism , Disease Models, Animal , Intubation, Intratracheal , Respiratory Distress Syndrome/physiopathology , Respiratory Function Tests , Swine
SELECTION OF CITATIONS
SEARCH DETAIL
...