Tuning the Aggregates of Thiophene-based Trimers by Methyl Side-chain Engineering for Photocatalytic Hydrogen Evolution.

Organic π-conjugated semiconductors (OCSs) have recently emerged as a promising alternative to traditional inorganic materials for photocatalysis. However, the aggregation of OCSs in photocatalytic aqueous solution caused by self-assembly, which closely relates to the photocatalytic activity, has not yet been studied. Here, the relationship between the aggregation of 4,7-Bis(thiophen-2-yl) benzothiadiazole (TBT) and the photocatalytic activity was systematically investigated by introducing and varying the position of methyl side chains on the two peripheral thiophene units. Experimental and theoretical results indicated that the introduction of -CH3 group at the 3-position of TBT resulted in the smallest size and best crystallinity of aggregates compared to that of TBT, 4- and 5-positions. As a result, TBT-3 exhibited an excellent photocatalytic activity towards H2 evolution, ascribed to the shorten charge carrier transport distance and solid long-range order. These results suggest the important role of aggregation behavior of OCSs for efficient photocatalysis.

Chitosan-Modified Polyethyleneimine Nanoparticles for Enhancing the Carboxylation Reaction and Plants' CO2 Uptake.

Increasing plants' photosynthetic efficiency is a major challenge that must be addressed in order to cover the food demands of the growing population in the changing climate. Photosynthesis is greatly limited at the initial carboxylation reaction, where CO2 is converted to the organic acid 3-PGA, catalyzed by the RuBisCO enzyme. RuBisCO has poor affinity for CO2, but also the CO2 concentration at the RuBisCO site is limited by the diffusion of atmospheric CO2 through the various leaf compartments to the reaction site. Beyond genetic engineering, nanotechnology can offer a materials-based approach for enhancing photosynthesis, and yet, it has mostly been explored for the light-dependent reactions. In this work, we developed polyethyleneimine-based nanoparticles for enhancing the carboxylation reaction. We demonstrate that the nanoparticles can capture CO2 in the form of bicarbonate and increase the CO2 that reacts with the RuBisCO enzyme, enhancing the 3-PGA production in in vitro assays by 20%. The nanoparticles can be introduced to the plant via leaf infiltration and, because of the functionalization with chitosan oligomers, they do not induce any toxic effect to the plant. In the leaves, the nanoparticles localize in the apoplastic space but also spontaneously reach the chloroplasts where photosynthetic activity takes place. Their CO2 loading-dependent fluorescence verifies that, in vivo, they maintain their ability to capture CO2 and can be therefore reloaded with atmospheric CO2 while in planta. Our results contribute to the development of a nanomaterials-based CO2-concentrating mechanism in plants that can potentially increase photosynthetic efficiency and overall plants' CO2 storage.

Conjugated polymer blends for faster organic mixed conductors.

A model mixed-conducting polymer, blended with an amphiphilic block-copolymer, is shown to yield systems with drastically enhanced electro-chemical doping kinetics, leading to faster electrochemical transistors with a high transduction. Importantly, this approach is robust and reproducible, and should be readily adaptable to other mixed conductors without the need for exhaustive chemical modification.

Synthesis and Characterization of Vanillin-Based π-Conjugated Polyazomethines and Their Oligomer Model Compounds.

The synthesis of π-conjugated polymers via an environmentally friendly procedure is generally challenging. Herein, we describe the synthesis of divanillin-based polyazomethines, which are derived from a potentially bio-based monomer. The polymerization is performed in 5 min under microwave irradiation without any metallic catalyst, with water as the only by-product. The vanillin-based polyazomethines were characterized by SEC, TGA, and UV-Vis spectroscopy. Model compounds were designed and characterized by X-ray diffraction and UV-Vis spectroscopy. The structure/properties study of vanillin-based azomethines used as models allowed us to unequivocally confirm the E configuration and to highlight the cross-conjugated nature of divanillin-based polymers.

Direct and selective access to amino-poly(phenylene vinylenes)s with switchable properties by dimerizing polymerization of aminoaryl carbenes.

Despite the ubiquity of singlet carbenes in chemistry, their utility as true monomeric building blocks for the synthesis of functional organic polymers has been underexplored. In this work, we exploit the capability of purposely designed mono- and bis-acyclic amino(aryl)carbenes to selectively dimerize as a general strategy to access diaminoalkenes and hitherto unknown amino-containing poly(p-phenylene vinylene)s (N-PPV's). The unique selectivity of the dimerization of singlet amino(aryl)carbenes, relative to putative C-H insertion pathways, is rationalized by DFT calculations. Of particular interest, unlike classical PPV's, the presence of amino groups in α-position of C=C double bonds in N-PPV's allows their physico-chemical properties to be manipulated in different ways by a simple protonation reaction. Hence, depending on the nature of the amino group (iPr2N vs. piperidine), either a complete loss of conjugation or a blue-shift of the maximum of absorption is observed, as a result of the protonation at different sites (nitrogen vs. carbon). Overall, this study highlights that singlet bis-amino(aryl)carbenes hold great promise to access functional polymeric materials with switchable properties, through a proper selection of their substitution pattern.

Optical Gain in Semiconducting Polymer Nano and Mesoparticles.

The presence of excited-states and charge-separated species was identified through UV and visible laser pump and visible/near-infrared probe femtosecond transient absorption spectroscopy in spin coated films of poly[N-9″-heptadecanyl-2,7-carbazole-alt-5,5-(4,7-di-2-thienyl-2',1',3'-benzothiadiazole)] (PCDTBT) nanoparticles and mesoparticles. Optical gain in the mesoparticle films is observed after excitation at both 400 and 610 nm. In the mesoparticle film, charge generation after UV excitation appears after around 50 ps, but little is observed after visible pump excitation. In the nanoparticle film, as for a uniform film of the pure polymer, charge formation was efficiently induced by UV excitation pump, while excitation of the low energetic absorption states (at 610 nm) induces in the nanoparticle film a large optical gain region reducing the charge formation efficiency. It is proposed that the different intermolecular interactions and molecular order within the nanoparticles and mesoparticles are responsible for their markedly different photophysical behavior. These results therefore demonstrate the possibility of a hitherto unexplored route to stimulated emission in a conjugated polymer that has relatively undemanding film preparation requirements.

Cyan Ni1-x Al2+2x/3□ x/3O4 Single-Phase Pigment Synthesis and Modification for Electrophoretic Ink Formulation.

Cyan Ni1-x Al2+2x/3O4 single-phase pigments with various Ni/Al atomic ratios (from 1:2 down to 1:4) have been prepared by a sol-gel route (Pechini) followed by postannealing treatments. Nickel aluminates crystallize in the well-known spinel structure (Fd3m space group), where metals are located at two different Wyckoff positions: 16d (octahedron) and 8a (tetrahedron). Based on X-ray diffraction (XRD) Rietveld refinements, Ni2+ cations are shown to be partially located in both tetrahedral and octahedral sites and, in addition, cationic vacancies occupy the Oh environment. In the pure-phase series, Ni/Al = 0.35, 0.40, 0.45, as the Al content increases, the Ni2+ rate in the Td site decreases for Ni/Al = 0.45, thus altering the cyan color; within this series, the most saturated cyan coloration is reached for the highest Al concentration. Inorganic pigment drawbacks are their high density and hydrophilic surface, which induce sedimentation and aggregation in nonpolar media used in electrophoretic inks. Hybrid core-shell particle pigments have been synthesized from cyan pigments using nitroxide-mediated radical polymerization (NMRP) with methyl methacrylate monomer in Isopar G, leading to a dispersion of electrically charged hybrids in apolar media. Surface functionalization of the pigments by n-octyltrimethoxysilane (OTS) and n-dodecyltrimethoxysilane (DTS) modifiers has been compared. The inorganic pigments are successfully encapsulated by organic shells to allow a strong decrease in their density. Cyan inks, adequate for their use in e-book readers or other electrophoretic displays, taking further advantage of the high contrast ratio and reflectivity of inorganic pigments in regard to organic dyes, have been stabilized.

Design of Potassium-Selective Mixed Ion/Electron Conducting Polymers.

An approach providing cation-selective poly-(3,4-ethylenedioxythiophene)(PEDOT):polyelectrolyte-mixed conductors is presented in this communication based on the structural modification of this ambivalent (ionic and electronic conductive) polymer complex. First, an 18-crown-6 moiety is integrated into the styrene sulfonate monomer structure as a specific metal cation scavenger particularly targeting K+ versus Na+ detection. This newly functionalized monomer is characterized by 1 H NMR titration to evaluate the ion selectivity. Aqueous PEDOT dispersion inks containing the polymeric ion-selective moieties are designed and their electrical and electrochemical properties analyzed. These biocompatible inks are the first proof-of-concept step towards ion selectivity in view of their interfacing with biological cells and microorgans of interest in the field of biosensors and physiology.

Divanillin-Based Polyazomethines: Toward Biobased and Metal-Free π-Conjugated Polymers.

Divanillin was synthesized in high yield and purity using Laccase from Trametes versicolor. It was then polymerized with benzene-1,4-diamine and 2,7-diaminocarbazole to form polyazomethines. Polymerizations were performed under microwave irradiation and without transition-metal-based catalysts. These biobased conjugated polyazomethines present a broad fluorescence spectrum ranging from 400 to 600 nm. Depending on the co-monomer used, polyazomethines with molar masses of around 10 kg·mol-1 and with electronic gaps ranging from 2.66 to 2.85 eV were obtained. Furthermore, time-dependent density functional theory (TD-DFT) calculations were performed to corroborate the experimental results.

Thiophene-Based Aldehyde Derivatives for Functionalizable and Adhesive Semiconducting Polymers.

The pursuit for novelty in the field of (bio)electronics demands for new and better-performing (semi)conductive materials. Since the discovery of poly(3,4-ethylenedioxythiophene) (PEDOT), the ubiquitous golden standard, many studies have focused on its applications but only few on its structural modification and/or functionalization. This lack of structural variety strongly limits the versatility of PEDOT, thus hampering the development of novel PEDOT-based materials. In this paper, we present a short and simple strategy for introducing an aldehyde functionality in thiophene-based semiconducting polymers. First, through a two-step synthesis, an EDOT-aldehyde derivative was prepared and polymerized, both chemically and electrochemically. Next, to overcome the inability of thiophene-aldehyde to be polymerized by any means, we synthesized a trimer in which thiophene-aldehyde is enclosed between two EDOT groups. The successful chemical and electrochemical polymerization of this new trimer is presented. The polymer suspensions were characterized by ultraviolet-visible-near-infrared spectroscopy, while the corresponding films were characterized by Fourier transform infrared and four-point-probe conductivity measurements. Afterward, insoluble semiconducting films were formed by using ethylenediamine as a cross-linker, demonstrating in this way the suitability of the aldehyde group for the easy chemical modification of our material. The efficient reactivity conferred by aldehyde groups was also exploited for grafting fluorescent polyamine nanoparticles on the film surface, creating a fluorescent semiconducting polymer film. The films prepared by electropolymerization, as shown by means of a sonication test, exhibit strong surface adhesion on pristine indium tin oxide (ITO). This property paves the way for the application of these polymers as conductive electrodes for interfacing with living organisms. Thanks to the high reactivity of the aldehyde group, the aldehyde-bearing thiophene-based polymers prepared herein are extremely valuable for numerous applications requiring the facile incorporation of a functional group on thiophene, such as the functionalization with labile molecules (thermo-, photo-, and electro-labile, pH sensitive, etc.).

Tuning the CrIV/CrIII Valence States in Purple Cr-Doped SnO2 Nanopowders: The Key Role of CrIV Centers and Defects.

A low content of chromium (≤5 mol %) has been incorporated into a SnO2 cassiterite by a coprecipitation route in a basic medium, followed by an annealing step under an O2 flow at T = 800 °C and T = 1000 °C. Accurate UV-vis and EPR spectroscopy investigations show the coexistence of isolated Cr4+ and Cr3+ ions as well as ferromagnetic Cr4+-Cr3+ and antiferromagnetic Cr3+-Cr3+ interactions. The strong purple hue is related to the isolated Cr4+ ions stabilized in a distorted octahedral site. This is thanks to the second-order Jahn-Teller (SOJT) effect with a crystal field splitting 10Dq value around 2.4 eV, whereas the 10Dq value is around 2 eV for isotropic Cr3+ ions, partially substituted for Sn4+ ions in cassiterite. Just after the coprecipitation process, only Cr3+ species are stabilized in this rutile network with a poor crystallinity. The isolated Cr4+ content remains high after annealing at 800 °C for 2 days especially for the highest Cr rate (2 and 5 mol %), leading to a darker purple color, but unfortunately the Cr3+ content also increases for a higher Cr concentration. A lighter purple hue can be reached after calcination at a higher temperature (T = 1000 °C) for a shorter time (4 h) but with a lower Cr content to avoid Cr clusters. This is due to stabilizing a high content of isolated Cr4+ species and limiting the Cr4+-Cr3+ ferromagnetic interactions, which are optimal for a 2% Cr content and also cause the color to darken. The key roles of the Cr4+ rate and the Cr4+-Cr3+ clusters create local defects whose concentration strongly varies with a total Cr content, which have then been demonstrated to strongly influence the optical and magnetic properties.

Size-Dependent Photophysical Behavior of Low Bandgap Semiconducting Polymer Particles.

The photophysics of water and propan-1-ol suspensions of poly [N-9"-heptadecanyl-2,7-carbazole-alt-5,5-(4,7-di-2-thienyl-2',1',3'- benzothiadiazole)] (PCDTBT) nanoparticles and mesoparticles has been studied by ultrafast spectroscopy. High molar mass polymer (HMM > 20 kg/mol) forms nanoparticles with around 50 nm diameter via mini-emulsion post-polymerization, while low molar mass (LMM < 5 kg/mol) polymer prepared by dispersion polymerization results in particles with a diameter of almost one order of magnitude larger (450 ± 50 nm). In this study, the presence of excited-states and charge separated species was identified through UV pump and visible/near-infrared probe femtosecond transient absorption spectroscopy. A different behavior for the HMM nanoparticles has been identified compared to the LMM mesoparticles. The nanoparticles exhibit typical features of an energetically disordered conjugated polymer with a broad density of states, allowing for delayed spectral relaxation of excited states, while the mesoparticles show a J-aggregate-like behavior where interchain interactions are less efficient. Stimulated emission in the red-near infrared region has been found in the mesoparticles which indicates that they present a more energetically ordered system.

Tailoring the Chemical Composition of LiMPO4 (M = Mg, Co, Ni) Orthophosphates To Design New Inorganic Pigments from Magenta to Yellow Hue.

New inorganic pigments with intense and saturated coloration have been prepared by a solid-state route and exhibit a large color scale from magenta to yellow. Indeed, yellow and magenta are two of the three subtractive model's colors with wide application in printing or displays as e-book readers. To develop yellow and magenta hue, we focused on cobalt- and nickel-based orthophosphates thanks to the chemical stability, low density, low price, and easy preparation of such a pigment class. All of these orthophosphates crystallize with the well-known olivine-type structure (orthorhombic Pnma space group) where transition metals are stabilized in a distorted octahedral site. This paper deals with the optical absorption properties of various orthophosphates, the correlations with structural features, and their colorimetric parameters (in L*a*b* color space). The LiCo1- xMg xPO4 series show near-magenta color with tunable luminosity, while the LiNiPO4 compound exhibits a frank yellow coloration. Co2+ (4T1) and Ni2+ (4A2) chromophore ions occupy a more or less distorted octahedral site, leading to tuning of the intensity of the d-d electronic transitions in the visible and near-IR ranges and providing a subtractive color scale; i.e., a LiCo1- xNi xPO4 solid solution possesses a very rich panel of colors between the two yellow and magenta extremes. It is worth noting that the crystal-field splitting and B Racah parameter have been estimated in a first approximation on the basis of the Tanabe-Sugano diagram and lead to the conclusion of a slightly higher crystal-field splitting of around 0.9 eV for Ni2+ ions and similar ß covalent parameters, despite the same crystallographic sites of both of these transition metals.

Synthesis of Carboxyl-EDOT as a Versatile Addition and Additive to PEDOT:PSS.

Two-step synthesis of EDOT (3,4-ethylenedioxythiophene) derivate bearing a carboxylic acid group (carboxyl-EDOT) is presented. This reactive monomer has been copolymerized with EDOT to afford PEDOT copolymers. Thanks to the most common additives usually added to the PEDOT:PSS dispersion, ethylene glycol and 4-dodecylbenzenesulfonic acid (DBSA), the carboxylic acid has been used to cross-link the material via esterification reactions. This result offers the possibility to produce a polymer network without adding any cross-linking agent. Furthermore, the short synthetic pathway of carboxyl-EDOT offers the possibility to incorporate new functionality either in EDOT monomer or in PEDOT materials with a reasonable chemical effort and background.

Core-Shell Double Gyroid Structure Formed by Linear ABC Terpolymer Thin Films.

The synthesis and self-assembly in thin-film configuration of linear ABC triblock terpolymer chains consisting of polystyrene (PS), poly(2-vinylpyridine) (P2VP), and polyisoprene (PI) are described. For that purpose, a hydroxyl-terminated PS-b-P2VP (45 kg mol-1 ) building block and a carboxyl-terminated PI (9 kg mol-1 ) are first separately prepared by anionic polymerization, and then are coupled via a Steglich esterification reaction. This quantitative and metal-free catalyst synthesis route reveals to be very interesting since functionalization and purification steps are straightforward, and well-defined terpolymers are produced. A solvent vapor annealing (SVA) process is used to promote the self-assembly of frustrated PS-b-P2VP-b-PI chains into a thin-film core-shell double gyroid (Q230 , space group: Ia3¯d) structure. As terraces are formed within PS-b-P2VP-b-PI thin films during the SVA process under a CHCl3 vapor, different plane orientations of the Q230 structure ((211), (110), (111), and (100)) are observed at the polymer-air interface depending on the film thickness.

Aqueous PCDTBT:PC71 BM Photovoltaic Inks Made by Nanoprecipitation.

The fabrication of organic solar cells from aqueous dispersions of photoactive nanoparticles has recently attracted the interest of the photovoltaic community, since these dispersions offer an eco-friendly solution for the fabrication of solar cells, avoiding the use of toxic solvents. In this work, aqueous dispersions of pure poly[n-9'-heptadecanyl-2,7-carbazole-alt-5,5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole)] (PCDTBT) and [6,6]-phenyl-C71 -butyric acid methyl ester (PC71 BM) nanoparticles, as well as of composite PC71 BM:PCDTBT nanoparticles, are prepared using the nanoprecipitation postpolymerization method. These dispersions are subsequently used to form the active layer of organic photovoltaic cells. Thin films of PC71 BM and PCDTBT are obtained by spray deposition of the nanoparticles' dispersions, and are characterized using a combination of spectroscopic and microscopic techniques. Photovoltaics that incorporate these active layers are fabricated thereafter. The impact of the annealing temperature and of the composition of the active layer on the efficiency of the solar cells is studied.

Templated Sub-100-nm-Thick Double-Gyroid Structure from Si-Containing Block Copolymer Thin Films.

The directed self-assembly of diblock copolymer chains (poly(1,1-dimethyl silacyclobutane)-block-polystyrene, PDMSB-b-PS) into a thin film double gyroid structure is described. A decrease of the kinetics of a typical double-wave pattern formation is reported within the 3D-nanostructure when the film thickness on mesas is lower than the gyroid unit cell. However, optimization of the solvent-vapor annealing process results in very large grains (over 10 µm²) with specific orientation (i.e., parallel to the air substrate) and direction (i.e., along the groove direction) of the characteristic (211) plane, demonstrated by templating sub-100-nm-thick PDMSB-b-PS films.

Highly Ordered Nanoring Arrays Formed by Templated Si-Containing Triblock Terpolymer Thin Films.

Laterally ordered nanorings with a periodicity of 38 nm are produced from the directed self-assembly of poly(1,1-dimethylsilacyclobutane)-block-polystyrene-block-poly(methyl methacrylate) thin films on topographically patterned substrates. Such nanoscale arrays with vertically oriented rings are highly desired in technological applications including memory using magnetic recording, metamaterial, waveguide, etc.

Photoactive Donor-Acceptor Composite Nanoparticles Dispersed in Water.

A major issue that inhibits the large-scale fabrication of organic solar modules is the use of chlorinated solvents considered to be toxic and hazardous. In this work, composite particles of poly[N-9'-heptadecanyl-2,7-carbazole-alt-5,5-(4,7-di-2-thienyl-2',1',3'-benzothiadiazole] (PCDTBT) and [6,6]-phenyl C71 butyric acid methyl ester (PC71BM) were obtained in water from a versatile and a ready-to-market methodology based on postpolymerization miniemulsification. Depending on the experimental conditions, size-controlled particles comprising both the electron donor and the electron acceptor were obtained and characterized using transmission electron microscopy (TEM), atomic force microscopy (AFM), small-angle neutron scattering (SANS), UV-visible absorption, and fluorescence spectroscopy. Intimate mixing of the two components was definitely asserted through PCDTBT fluorescence quenching in the composite nanoparticles. The water-based inks were used for the preparation of photovoltaic active layers that were subsequently integrated into organic solar cells.

Laterally Ordered Sub-10 nm Features Obtained From Directed Self-Assembly of Si-Containing Block Copolymer Thin Films.

Laterally ordered sub-10 nm features are produced from the directed self-assembly of poly(1,1-dimethyl silacyclo-butane)-block-poly(methyl methacrylate) (PDMSB-b-PMMA) thin films on sinusoidal azobenzene-containing patterns. The use of sinusoidal surface relief grating enables the formation of very large grain areas (over several µm(2) ) consisting of out-of-plane PMMA cylinders.