Clinical evaluation of a new resilient denture liner. Part 1: Compliance and color evaluation.

PURPOSE: A new experimental resilient denture liner (MPDS-SL; Lai Laboratories, Burnsville, MN) and Molloplast-B (Buffalo Dental Manufacturing, Syosset, NY) were clinically evaluated for compliance and color change over a 1-year period. MATERIALS AND METHODS: In this crossover study, each of 20 patients had 2 dentures fabricated with long-term, silicone-based resilient liners, 1 denture with Molloplast-B and the other with MPDS-SL. Each denture was used for 6 months, during which time each patient kept a journal detailing his or her use and cleaning regimen. The 2 materials were assessed for compliance and color at the beginning of the study and again after 3 months and 6 months of use. Compliance was determined by applying a 3-lb force to the surface of the material following a square-wave pattern, using a closed-loop servohydraulic testing system. The force and position values were recorded using a storage oscilloscope. Compliance was measured at 3 locations on each denture and analyzed using data-acquisition software. Images of the dentures were captured using a zoom stereomicroscope with a charge-coupled video camera and image analysis software. The color was measured at 3 locations on each denture; RGB and L* a* b* were calculated. RESULTS: Compliance increased from baseline to 3 months and from 3 months to 6 months for almost all locations on both materials. Molloplast-B and MPDS-SL differed in average change in compliance at 6 months; the average change in compliance from baseline to 6 months was 453 (standard error, 46) for Molloplast-B and 284 (standard error, 46) for MPDS-SL (p = 0.019). For both materials, color changed significantly from baseline to 3 months and from baseline to 6 months (p < 0.01). MPDS-SL changed significantly less than Molloplast-B from baseline to 6 months for R (p = 0.039), G (p = 0.037), B (p = 0.005), and L* (p = 0.042). CONCLUSION: For both materials, compliance increased over 6 months of wear. The color change for MPDS-SL was considerably less significant than that for Molloplast-B.

Patient perceptions of professionalism in dentistry.

The purpose of this study was to examine how patients perceived the professionalism of University of Minnesota School of Dentistry students, faculty, and staff. Professionalism is defined by the authors as an image that will promote a successful relationship with the patient. Patients within comprehensive care clinics were asked to assess physical attributes and behaviors of the dental care providers using a questionnaire. The patients read statements dealing with characteristics of the dental care providers and responded as to whether they agreed, were neutral, or disagreed with the statement. The surveyed population consisted of 103 males and 97 females, 64 percent of whom lacked insurance coverage. Fifty-one percent of the patients were between the ages of forty-four and sixty-nine, but the overall age distribution was dispersed over a range of eighteen to one hundred. Our research found that all dental care providers displayed a professional appearance as well as behavior. The attire of the dental care provider affected the comfort and anxiety levels of patients, as did first impressions of both students and faculty. Most patients reported that students and faculty displayed effective time management and used appropriate language during the appointment. Finally, hairstyle, makeup, and jewelry appeared to have little effect on patients' opinions of the various dental care providers.

Clinical evaluation of resilient denture liners. Part 2: Candida count and speciation.

PURPOSE: The purpose of this study was to count and to speciate Candida isolated from 2 resilient denture liners, Molloplast-B and MPDS-SL. MATERIALS AND METHODS: A group of 20 patients each had 1 maxillary denture and 2 mandibular dentures fabricated. One mandibular denture was lined with Molloplast-B, and 1 was lined with MPDS-SL. Each denture was used for 3 months. At the end of the 3-month period, the mandibular denture was surrendered, and a 5 x 5-mm circular resilient liner sample was obtained from the tissue surface of the lingual flange. Samples were processed, and Candida was isolated and counted. Speciation of Candida was performed using CHROMagar Candida and API 20C AUX strips. RESULTS: Molloplast-B had, on average, 5 times as many CFU/sample as MPDSL-SL, but this difference was not significant (p = 0.26). A sign test gave a similar nonsignificant trend (p = 0.057). CHROMagar identified several Candida species, and confirmation was made using API 20C AUX strips. One patient was lost to follow-up. Of 19 Molloplast-B samples, 7 had no growth, 4 grew C. albicans, 3 grew C. parapsilosis, 2 grew C. glabrata, 1 grew C. tropicalis, 2 grew a Trichosporon spp., and 2 grew a nonidentifiable colony. The analogous counts for 19 MPDS-SL samples were 10, 4, 1, 3, 0, 1, and 1 (p = 0.45 for culture positively, exact McNemar test). CONCLUSIONS: Candida growth on Molloplast-B was not significantly different from growth on MPDS-SL. Several yeast species were cultured from each material. The rates of culture-positive testing did not differ between the 2 resilient denture liners.

Laser digitization of casts to determine the effect of tray selection and cast formation technique on accuracy.

UNLABELLED: STATEMENT OF PROBLEM; Several studies have attempted to determine the ideal combination of dental materials and laboratory techniques to produce the most accurate dental cast. Most have made use of 2-dimensional manual measuring devices, which neglect to account for the dimensional changes that exist along a 3-dimensional surface. PURPOSE: The purpose of this study was to determine the effect of impression tray selection and cast formation techniques on the dimensional change of a dental cast with the use of new, 3-dimensional optical digitizing technology. MATERIAL AND METHODS: Multiple impressions of a machined steel die that resembled a dental arch were made with custom and stock impression trays and vinyl polysiloxane impression material. The impressions were poured in type V artificial dental stone and allowed to set with the tray inverted or noninverted. The steel master die and stone casts were digitized with the Steinbichler Comet 100 Optical Digitizer, which was developed at the Minnesota Dental Research Center for Biomaterials and Biomechanics. Three-dimensional images of the stone casts were aligned to the 3-dimensional image of the master die and analyzed with AnSur-NT software. Multiple measurements of the master die and stone casts were analyzed to determine the accuracy of the 3-dimensional technology and of the impression and cast fabrication techniques. Planar distances between the center of each crown preparation were measured, as were crown heights. Data were analyzed with analysis of variance (P<.05), and root mean square error values were determined. RESULTS: Casts were compared with a total of 45 significance tests, of which only 4 yielded P<.05. There was no pattern to these results, which suggests that they were false-positive findings. CONCLUSION: Results obtained with the use of new optical digitizing technology indicated that neither impression tray type nor cast formation technique affected the accuracy of final casts.