Photochemically crosslinked matrices of gelatin and fibrinogen promote rapid cell proliferation.

Here we report the use of a facile photochemical crosslinking method to fabricate stable polymer matrices from unmodified gelatin and fibrinogen. Gels were produced by covalent crosslinking of the proteins in a rapid photo-oxidative process, catalysed by a ruthenium metal complex and irradiation with visible light. For generation of macroporous, spongy matrices, the proteins and crosslinking reagents were mixed with catalase and hydrogen peroxide to achieve a foaming reaction, producing a stable, foamed matrix that was subsequently photo-crosslinked. C2C12 cells were either seeded onto the matrices after photo-curing or embedded in the protein matrix prior to foaming and crosslinking. Cells seeded onto scaffolds post-curing showed high cell viability and rapid proliferation in vitro. For cells embedded in the matrix prior to crosslinking there was some loss of initial viability, but surviving cells were able to proliferate after a period of in vitro cultivation. The matrices were shown to be biocompatible when implanted into nude mice, with evidence of proliferation and differentiation of cells seeded into the scaffolds. The results are promising for further development of tissue-engineering scaffolds based on this ruthenium-catalysed photo-crosslinking method.

A highly elastic tissue sealant based on photopolymerised gelatin.

Gelatin is widely used as a medical biomaterial because it is readily available, cheap, biodegradable and demonstrates favourable biocompatibility. Many applications require stabilisation of the biomaterial by chemical crosslinking, and this often involves derivatisation of the protein or treatment with cytotoxic crosslinking agents. We have previously shown that a facile photochemical method, using blue light, a ruthenium catalyst and a persulphate oxidant, produces covalent di-tyrosine crosslinks in resilin and fibrinogen to form stable hydrogel biomaterials. Here we show that various gelatins can also be rapidly crosslinked to form highly elastic (extension to break >650%) and adhesive (stress at break >100 kPa) biomaterials. Although the method does not require derivatisation of the protein, we show that when the phenolic (tyrosine-like) content of gelatin is increased, the crosslinked material becomes resistant to swelling, yet retains considerable elasticity and high adhesive strength. The reagents are not cytotoxic at the concentration used in the photopolymerisation reaction. When tested in vivo in sheep lung, the photopolymerised gelatin effectively sealed a wound in lung tissue from blood and air leakage, was not cytotoxic and did not produce an inflammatory response. The elastic properties, thermal stability, speed of curing and high tissue adhesive strength of this photopolymerised gelatin, offer considerable improvement over current surgical tissue sealants.

Gene expression profiles of BMP4, FGF10 and cognate inhibitors, in the skin of foetal Merino sheep, at the time of secondary follicle branching.

The high concentration of secondary branched follicles is a distinctive feature of the Merino sheep. These follicles initiate from 100 days of gestation. Here, we report a transition in abundance of the BMP4 and FGF10 morphogens occurring at this time. At 103 days of gestation, FGF10 gene expression dropped steadily from maximal levels, in a trend that continued until day 143. Conversely, from day 105, BMP4 transcript levels rapidly increased to maximal levels that were maintained until 131 days, before declining. This profile closely matches reported changes in branched follicle numbers, which peak in density at day 134. SPRY4, a known regulator of FGF10, increased to maximal levels concomitant with the fall in FGF10, suggesting a relationship. Levels of the BMP4 inhibitor NOG matched the initial rise of BMP4, with a fivefold spike at 108 days; but consistent with the rise in BMP4, this high level was not sustained.

Microsatellite detection of donor-derived sperm DNA following germ cell transplantation in cattle.

Although autologous and heterologous transplantation has resulted in colonisation of recipient testes in cattle, the ability of the transplanted spermatogonial stem cells to complete spermatogenesis has not yet been determined. The objective of the present study was to identify and validate microsatellite markers that can distinguish the genotype of different individuals and therefore can be used to detect the presence of donor DNA in recipient semen samples. In a previous study by this group, successful colonisation of recipient testes by heterologous transfer using a fluorescent dye was shown. In the present work, some of the same recipient animals were investigated further to monitor donor-derived sperm production. The bovine microsatellite detection method was developed specifically to test the ejaculates of the recipients and can also be used to pre-match individuals before germ cell transplantation. Semen was collected from the recipients 52-98 weeks after transfer and the presence of donor DNA in the samples was determined using microsatellite markers. In one of the recipients, all collected semen samples were shown to be positive for donor-derived cells; however, the percentage of donor spermatozoa in the recipient ejaculate declined with time. The donor DNA was also detected in both single cell suspensions and testis tissue from this recipient. These results demonstrate for the first time that testicular germ cell transplantation between different breeds of cattle is feasible and the recipients thereof are able to produce spermatozoa of donor origin. This technology has potential applications in livestock breeding systems and may provide an alternative to artificial insemination.

The development of photochemically crosslinked native fibrinogen as a rapidly formed and mechanically strong surgical tissue sealant.

We recently reported the generation of a highly elastic, crosslinked protein biomaterial via a rapid photochemical process using visible light illumination. In light of these findings, we predicted that other unmodified, tyrosine-rich, self-associating proteins might also be susceptible to this covalent crosslinking method. Here we show that unmodified native fibrinogen can also be photochemically crosslinked into an elastic hydrogel biomaterial through the rapid formation of intermolecular dityrosine. Photochemically crosslinked fibrinogen forms tissue sealant bonds at least 5-fold stronger than commercial fibrin glue and is capable of producing maximum bond strength within 20s. In vitro studies showed that components of the photochemical crosslinking reaction are non-toxic to cells. This material will find useful application in various surgical procedures where rapid curing for high strength tissue sealing is required.

Examination of basement membrane components associated with the bovine seminiferous tubule basal lamina.

Immunohistology has been used to examine the distribution of certain components of the basement membrane (BM) associated with bovine spermatogonial germ cells that are located within the seminiferous tubules. Histology was performed on testis tissue from Brahman cattle (Bos indicus) of three different age groups: pre-pubescent (4-6 months), juvenile (8-10 months) and adult (18-24 months) animals. There were no major changes in the BM composition apparent between these three age groups, except for certain lectin staining. These data suggest that the predominant collagen type IV component may have an alpha3 and alpha4 composition, although other chains, including the alpha5 and alpha6 chains, were also present. Possibly the main laminin type present was laminin 121 (alpha1beta2gamma1), although other variants were also present. Both nidogen-1 and perlecan, which are normal BM components, were also found as part of the seminiferous tubule BM. Interstitial collagens, such as type I, III and VI collagens, were found in the peritubular space, but were not part of the BM itself, although type VI collagen was most visible in the peritubular zone adjacent to the tubules. Examination of the BM with a range of lectins gave strong staining for (glcNAc)(2) entities, weak positive staining for alpha-l-fuc, but little or no staining for alpha-galNAc and (glcNAc)(3) at all ages, whereas staining for alpha-gal, beta-gal(1-->3)galNAc and alpha-man showed developmental changes.

Design and facile production of recombinant resilin-like polypeptides: gene construction and a rapid protein purification method.

Resilin is an elastic protein found in specialized regions of the cuticle of insects, which displays unique resilience and fatigue lifetime properties. As is the case with many elastomeric proteins, including elastin, gliadin and spider silks, resilin contains distinct repetitive domains that appear to confer elastic properties to the protein. Recent work within our laboratory has demonstrated that cloning and expression of exon 1 of the Drosophila melanogaster CG15920 gene, encoding a putative resilin-like protein, results in a recombinant protein that can be photochemically crosslinked to form a highly resilient, elastic biomaterial (Rec1 resilin). The current study describes a recursive cloning strategy for generating synthetic genes encoding multiple copies of consensus polypeptides, based on the repetitive domains within resilin-like genes from D. melanogaster and Anopheles gambiae. A simple non-chromatographic purification method that can be applied to these synthetic proteins and Rec1 is also reported. These methods for the design and purification of resilin-like periodic polypeptides will facilitate the future investigation of structural and functional properties of resilin, and the development of novel highly resilient biomaterials.

High yield expression of recombinant pro-resilin: lactose-induced fermentation in E. coli and facile purification.

Resilin is an elastic protein with outstanding material properties: high resilience and a very high fatigue lifetime. We are interested in the production of resilin-like proteins which can be photo-chemically cross-linked to form rubbery biomaterials to be used in a variety of industrial and medicinal applications. A method has been developed for producing soluble recombinant proteins in small scale fermentation equipment using glycerol batch for initial growth and primary induction by IPTG at carbon source depletion, followed by new growth in lactose-induced culture. Recombinant rec1-resilin has been over-expressed in the host strain Escherichia coli BL21(DE3)pLysS at a level of up to 300 mg/l, a greater than 20-fold increase in volumetric productivity, relative to that obtained from conventional IPTG induction in LB medium. The primary induction step before lactose induction in fresh medium resulted in a 2.5- to 3-fold increase of both volumetric productivity and cell specific yield compared to that without primary induction under the same conditions. This method is amenable and suitable for large scale production of soluble resilin-like proteins at a low operating cost. In addition, a simple 'salt precipitation and heat purification' method allowed rapid and efficient downstream processing of a large quantity of soluble recombinant resilin-like proteins. These methods will enable investigation of the structural and functional properties of resilin-like proteins, and the development of highly resilient biomaterials.

A rapid method for detecting extracellular proteinase activity in Cryptococcus neoformans and a survey of 63 isolates.

A rapid method to detect extracellular proteolytic activity around colonies of Cryptococcus neoformans was developed with tannic acid used to complex with residual protein in a solid medium. A survey was conducted with 32 isolates of C. neoformans var. gattii and 31 isolates of C. neoformans var. neoformans which were cultured on medium containing gelatin as the sole nitrogen source. The annulus of clearing around fungal colonies was > 1.2 mm in 24 (77%) isolates of C. neoformans var. neoformans compared with only 7 (22%) isolates of C. neoformans var. gattii. There was no difference in proteolytic activity between environmental and human clinical isolates of C. neoformans. However, there was a difference between the size of the annulus around animal isolates of C. neoformans var. neoformans and isolates of the same variety from other sources. The annuli around the 14 animal isolates were all >1.2 mm, while 7 (70%) of 10 human clinical isolates and only 3 (43%) of 7 environmental isolates were scored in the high proteinase range. A difference between the genetic types (as characterised by RAPD typing) of C. neoformans var. gattii was also evident with 17 (77%) of 22 VG-I isolates having a small annulus compared with only 1 (17%) of 6 VG-II and VG-III isolates with annuli of similar size. Relatively low proteinase production by C. neoformans var. gattii may reduce local and systemic spread of infection in mammalian hosts.